Re: Development build updated
- 55506 Playing some more with the 755T. I put in "--Path WIDE1-1" command and left it there in the outbox. About 30 minutes later It took the command and send a reply. Sent another command, about 30 minutes later it responded again.
Hope this helps,
--- In firstname.lastname@example.org, "Alan" <alan@...> wrote:
> Put 55506 in two mobile OT2M's. Nuvi-350 remote commands, messaging, and tracking worked OK. No problems noted.
> nuvi-755T Lost all message and command output to the OT2M. Last version 55504 some commands stopped working from the 755T. Today The 755 could still receive messages, but would not acknowledge any messages or commands that were sent to the OT2. Flashed it back and functionality returned to normal.
> Noticed some old low priority bugs:
> Text changes to WS2300
> TX Delay decrements when profile tab is touched
> OLD obsolete alias in the default digi config: Relay should go away. WIDE probably shouldn't be there either since it will react to any WIDE, including obsolete "WIDE".
> Thanks Scott,
> It behaved well while mobile.
> --- In email@example.com, Scott Miller <scott@> wrote:
> > I just uploaded build 55506 for testing. This version adds a new
> > interlock to the Peet Bros and Davis weather parsers. Both have had
> > problems with weather data being corrupted when the unit transmits in
> > the middle of receiving data from the station. Hopefully this will fix
> > that. It also adds a 4-second timeout to the parsers, so that if you
> > unplug the station mid-stream it won't get stuck waiting for data.
> > Scott