Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: tk-705

Expand Messages
  • gervais
    well Alan i will connect it directly from the RG6 too the DB9 of the OT2. tomorrow i will go at the telephone store and buy an RG6 cable ,,,about 2 or 3 feets.
    Message 1 of 7 , Sep 5, 2010
    • 0 Attachment
      well Alan
      i will connect it directly from the RG6 too the DB9 of the OT2.
      tomorrow i will go at the telephone store and buy an RG6 cable ,,,about 2 or
      3 feets.
      thanks again

      Gervais


      --------------------------------------------------
      From: "Alan" <alan@...>
      Sent: Sunday, September 05, 2010 3:42 PM
      To: <tracker2@yahoogroups.com>
      Subject: [tracker2] Re: tk-705

      >
      > Glad you found it. You could cut out the hook pin 6, and route speaker
      > audio out to RG-6.
      >
      > Or use the 1/8 audio plug on the back of the radio to route audio to
      > your dB9 cable.
      >
      > mic ----------- dB-9
      > pin 1-----------pin 7 - switched B+ 12volt .5 amp
      > pin 3-----------pin 3 - PTT
      > pin 4-----------pin 6 - ground
      > pin 5-----------pin 1 - mic hi
      > 1/8 speaker--pin 5 - speaker audio
      >
      > The switched B+ is fused on pin 1 and can power the OT2, and a probably
      > a low draw GPS without popping the fuse.
      >
      >
      >
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.