Loading ...
Sorry, an error occurred while loading the content.
 

Re: Very New To APRS

Expand Messages
  • KB8VOM
    ... Thanks for the ones that have helped me. I will be sending the OT1+ back later this month for an exchange of the OT2. TNX and 73, Adam KB8VOM Yuba City, CA
    Message 1 of 3 , Jun 12, 2010
      --- In tracker2@yahoogroups.com, "KB8VOM" <kb8vom_2006@...> wrote:
      >
      > Hello Group,
      > I am very new to APRS, so new that I am working on my first APRS install. Here is what I face.
      >
      > I have a Garmin Nuvi 350, OT1+ in case, Garmin FMI cable, and an Alinco DR-112, and a 4-way power pole splitter.
      >
      > I know there has to be a cable between the DR-112 and the OT1+ to handle the audio coming from the ext speaker jack, and the data being sent connected to the 8 pin mic jack on the front. Does this cable need to get power from the radio or the 4-way splitter when there is power being inserted into the Garmin FMI cable. I have also read that the Garmin Nuvi 350 needs to be powered in the dock for the FMI cable to work. Seems to me that there is a lot of power in the GPS/FMI cable to power the GPS, FMI, and OT1+ already.
      >
      > Any information will be extremely grateful!!
      >
      > 73,
      > Adam KB8VOM
      > Yuba City, CA

      Thanks for the ones that have helped me. I will be sending the OT1+ back later this month for an exchange of the OT2.

      TNX and 73,
      Adam KB8VOM
      Yuba City, CA
    Your message has been successfully submitted and would be delivered to recipients shortly.