Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: Active led color?

Expand Messages
  • Scott Miller
    Only going red on TX is just fine. You want to see a green blink when it s getting a GPS fix. Scott
    Message 1 of 4 , Apr 29 9:37 AM
    • 0 Attachment
      Only going red on TX is just fine. You want to see a green blink when
      it's getting a GPS fix.

      Scott

      captcurt@... wrote:
      >
      >
      > Thanks Scott:
      >
      > I suspect that it is in there but several scans thru, I didn't see it.
      >
      > The only time I see it go red is when the unit transmits. Is this normal
      > or could I be getting RF into the unit?
      >
      > I was using a mag mount antenna and the only real vehicle ground is via
      > the power input. I might try a choke on the two serial ports and during
      > the summer, will attach a body ground at the antenna mount.
      >
      > Thanks again,
      >
      > Curt
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > Scott Miller <scott@...> wrote:
      > >
      > > It should be in there somewhere... it'll blink red when it gets an
      > > invalid fix from the GPS and yellow when it outputs a waypoint.
      > >
      > > Scott
      > >
      > > captcurt@... wrote:
      > > >
      > > >
      > > > What is the significance of the red color of the ACT LED on the OT2?
      > > >
      > > > I see it blinking with data comm from the Nuvi 350 and it goes to red
      > > > when the system is keyed and the TX LED comes on.
      > > >
      > > > Can't find any reference to what this means in the manual.
      > > >
      > > > Thanks
      > > >
      > > > Curt
      > > >
      > > >
      > >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.