Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] silly newbie question about cable

Expand Messages
  • Randy Love
    ... Yes, the same cable that works to program it will work to connect to it for other uses. You will need to put the port into AUTO or KISS mode with OTCONFG,
    Message 1 of 3 , Feb 15 12:36 PM
    • 0 Attachment
      On Mon, Feb 15, 2010 at 2:48 PM, haydn27 <haydn@...> wrote:
       

      Is the programming cable the same on to use for this or do i need one that will connect to the laptop sound card rather than the com port?

      Cheers in advance of any help

      Haydn
      M3WOV

      Yes, the same cable that works to program it will work to connect to it for other uses. You will need to put the port into AUTO or KISS mode with OTCONFG, then define the port in AGWPE as a TNC2 at the proper com port number and speed with KissCmd blank and ExitKiss unchecked, then connect to AGWPE via AGWTerm or AGWTracker. You will not need to define a soundcard modem set up in AGWPE, just the TNC2 on the same com port number that you used with the OTCONFG program.

      73,
      Randy
      WF5X

    Your message has been successfully submitted and would be delivered to recipients shortly.