Loading ...
Sorry, an error occurred while loading the content.

9192Re: digipeat own packets when backpacking

Expand Messages
  • kc2eus
    Nov 2 5:39 PM
      Would that not allow the T2 to digipeat everything ?


      --- In tracker2@yahoogroups.com, "Keith VE7GDH" <ve7gdh@...> wrote:
      > Andrew KC2EUS wrote...
      > > what settings do I put in the Tracker2 to get it to digipeat my beacon
      > > from the VX8. I set the digipeat on call, but on a quick test, and it
      > > did not seem to work. What am I missing... is there anything different
      > > I need to add to the WIDE1-1, WIDE2-1 on the VX8 ??
      > With DIGI ON in the T2, it should digipeat via the call in the T2. To
      > use it that way, you could use a path like GM1YMI,WIDE2-1 assuming that
      > GM1YMI was the MYCALL in the T2. If the T2 could be heard by a WIDEn-N
      > digi, it would act on the remaining WIDE2-1. However, if the T2 didn't
      > hear the beacon from the VX-8, your beacon would end there. Digi paths
      > are used in order... with the exception of the T2 which if it had
      > PREEMPT <n> turned on could act on an alias with un-used aliases
      > ahead of the "pre-empted" alias.
      > To get it to respond to WIDEn-N you could...
      > ALIAS 1 WIDE
      > HOPLIMIT 2
      > USEALIAS 1
      > DIGIID 1 ON
      > or if you wanted it to respond to WIDE1-1 only...
      > ALIAS 1 WIDE1
      > HOPLIMIT 1
      > USEALIAS 1
      > DIGIID 1 ON
      > 73 es cul - Keith VE7GDH
      > --
      > "I may be lost, but I know exactly where I am!"
    • Show all 17 messages in this topic