Loading ...
Sorry, an error occurred while loading the content.

4915Re: [tracker2] PHG with Temperature

Expand Messages
  • Scott Miller
    Sep 28, 2008
    • 0 Attachment
      I think you can get a 30-day trial. You can also get a 1-year license
      for $400, which is more reasonable, but it's still a lot of a hobby project.

      I'll see if there's something simple I can do, but some things are hard
      to shuffle around without excessively complicating the code.

      Scott

      Patrick Domack wrote:
      >
      >
      > Opps, I thought I was reading the opentracker+ forum not the tracker2.
      >
      > I looked at it, and I can't compile the firmware for the tracker2
      > myself, cause it's >32k, and the company that has the compiler, offers
      > it for free for <32k, and they want $2500 if you want to make >32k
      >
      > Guess scott is going have to compile a version of this for you. Or if
      > I can come across a free/opensource compiler somewhere.
      >
      > Quoting FUJIURA Toyonori <toyokun@... <mailto:toyokun%40gmail.com>>:
      >
      > > Ok, I understood.
      > >
      > > Please send me the firmware because I want to try it.
      > >
      > > Also I found a source code for this firmware in freepository.com.
      > > But I do not have the experience of making the firmware for the
      > > built-in computer.
      > > If I can, please tell me how to build the firmware from the source code.
      > > I'll try to resolv future problems.
      > >
      > > 2008/9/28 Patrick Domack <patrickdk@...
      > <mailto:patrickdk%40patrickdk.com>>:
      > >> The issue here is that it's hardcoded in the software, to add
      > >> altitude, then temp, volt, hdoc, comment
      > >>
      > >> I changed my firmware to do it as, comment, temp, volt, hdoc,
      > >> altitude, but then the balloon people would get upset.
      > >>
      > >> I was just thinking of a checkbox that says to put the comment before
      > >> or after the extra text, so it would work for both people.
      > >>
      > >> But yes, if your running the normal firmware, you will be stuck with
      > >> having everything off, in order to use the comment to insert special
      > >> stuff like that.
      > >>
      > >> If you would like, I can send you the firmware I am using so it will
      > >> work for you now.
      > >>
      > >> Quoting FUJIURA Toyonori <toyokun@...
      > <mailto:toyokun%40gmail.com>>:
      > >>
      > >>> Thank you Keith,
      > >>>
      > >>> 2008/9/27 Keith VE7GDH <ve7gdh@... <mailto:ve7gdh%40yahoo.com>>:
      > >>>> 2008-09-27 10:15:24 UTC:
      > >>>> JG2RZF>APOT2A,WIDE2-2,qAR,JE3MXU
      > >>>> :!3441.00NU13548.50E# 13.4V 22CPHG1220 W1,NRn New-N Fill-in Digi NARA
      > >>>
      > >>> I think this format is wrong.
      > >>> PHG should be followed by voltage and temperature.
      > >>>
      > >>>> 2008-09-27 10:22:08 UTC:
      > >>>> JG2RZF>APOT2A,WIDE2-2,qAR,JE3MXU
      > >>>> :!3441.00NU13548.50E#PHG1220 W1,NRn New-N Fill-in Digi NARA
      > >>>>
      > >>>> Then later the PHG is gone. Are you using profile switching?
      > Perhaps you
      > >>>> have voltage and temperature enabled in one profile but not the other.
      > >>>
      > >>> No, I change the setiing manually.
      > >>>
      > >>>> Also, what happens if you send the PHG as status text in every second
      > >>>> transmission instead of in a beacon comment every transmission?
      > >>>> Also, it seems to be beaconing every minute or so most of the time. Is
      > >>>> that just while you are testing?
      > >>>
      > >>> Thank you for your warning.
      > >>> Now I send the packet every ten minutesfor testing.
      > >>>
      > >>> When all my packets send to Internet through nearby IGATE,
      > >>> I'll change the interval to 30min.
      > >>>
      > >>> Thank you.
      > >>> --
      > >>> FUJIURA Toyonori mailto:toyokun@... <mailto:toyokun%40gmail.com>
      > >>>
      > >>
      > >>
      > >>
      > >>
      > >> ------------------------------------
      > >>
      > >> Yahoo! Groups Links
      > >>
      > >>
      > >>
      > >>
      > >
      > >
      > >
      > > --
      > > FUJIURA Toyonori mailto:toyokun@... <mailto:toyokun%40gmail.com>
      > >
      >
      >
    • Show all 10 messages in this topic