3958RE: [tracker2] Audio CD
- Jun 4, 2008Greetings Scott,Thank you for serving up the file! I can now monitor packets.Best regards,Fred
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of Scott Miller
Sent: Tuesday, June 03, 2008 15:01
Subject: Re: [tracker2] Audio CD
Both channels are identical. I use an HP 8920A comm analyzer when I'm
testing it through a radio, but if you haven't got $3-$5k to spend on
one of those, an HT would probably work fine as long as you're careful
to set the deviation properly.
Fred Hillhouse wrote:
> Hi Scott,
> CD Players are usually stereo out. I imagine that either channel fed in
> to the input is fine. Or should the channels be mixed?
> How would I go about feeding this audio into the front end of a radio? I
> was thinking I might pipe it through my HT (set at 20mW to pretty keep
> the signal in my basement) and receive it on the suspect radio.
> Thank you!
> Best regards,
> ------------ --------- --------- --------- --------- --------- -
> *From:* tracker2@yahoogroup s.com [mailto:tracker2@yahoogroup s.com]
> *On Behalf Of *Scott Miller
> *Sent:* Tuesday, June 03, 2008 14:05
> *To:* tracker2@yahoogroup s.com
> *Subject:* Re: [tracker2] Audio CD
> The audio out from a CD player works just fine (at least, for every
> device I've ever tested) and it should work with any 1200 baud TNC.
> Fred Hillhouse wrote:
> > Greetings,
> > I kept hearing about an audio CD and found it on the web site. It is
> > currently downloading well it was when I started this email. :)
> > Would I be correct in thinking that it will work on all TNCs? I
> am trying to
> > figure out why I get no data through a TNC. (It is not a Tracker2!)
> > How are people connecting to the TNC? I was thinking I could
> connect the
> > Audio Out (headphone jack) of the CD player and feed the Audio In
> of the
> > TNC. Any issues with that?
> > I understand not all of the tracks are playable in the CD player.
> > I hope to rule out the TNC. If the data gets through it, I can
> then focus on
> > the radio.
> > Thank you!
> > Best regards,
> > Fred
- << Previous post in topic Next post in topic >>