Loading ...
Sorry, an error occurred while loading the content.

3952RE: [tracker2] Audio CD

Expand Messages
  • Fred Hillhouse
    Jun 3, 2008
    • 0 Attachment
      Hi Scott,
       
      CD Players are usually stereo out. I imagine that either channel fed in to the input is fine. Or should the channels be mixed?
       
      How would I go about feeding this audio into the front end of a radio? I was thinking I might pipe it through my HT (set at 20mW to pretty keep the signal in my basement) and receive it on the suspect radio.
       
      Thank you!
       
      Best regards,
      Fred
       


      From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Scott Miller
      Sent: Tuesday, June 03, 2008 14:05
      To: tracker2@yahoogroups.com
      Subject: Re: [tracker2] Audio CD

      The audio out from a CD player works just fine (at least, for every
      device I've ever tested) and it should work with any 1200 baud TNC.

      Scott

      Fred Hillhouse wrote:
      >
      >
      > Greetings,
      >
      > I kept hearing about an audio CD and found it on the web site. It is
      > currently downloading well it was when I started this email. :)
      >
      > Would I be correct in thinking that it will work on all TNCs? I am trying to
      > figure out why I get no data through a TNC. (It is not a Tracker2!)
      >
      > How are people connecting to the TNC? I was thinking I could connect the
      > Audio Out (headphone jack) of the CD player and feed the Audio In of the
      > TNC. Any issues with that?
      >
      > I understand not all of the tracks are playable in the CD player.
      >
      > I hope to rule out the TNC. If the data gets through it, I can then focus on
      > the radio.
      >
      > Thank you!
      >
      > Best regards,
      > Fred
      >
      >

    • Show all 28 messages in this topic