Loading ...
Sorry, an error occurred while loading the content.

3415Re: [tracker2] Nuvi/APRS messages, suggestion

Expand Messages
  • Scott Miller
    Apr 8 7:55 PM
    • 0 Attachment
      > Are these capable of being sent via the Nüvi 350 and Tracker2? I'd
      > imagine the later ones, addressed to a particular station, are not a
      > problem, but what of the generic ?APRS? message? Does the Nüvi/FMI
      > interface allow for unproto messages?

      Sort of. You should be able to use the BEACON command. Something like:

      --BEACON ?APRS?

      Might do it.

      > Also, to see what is there, it might be useful if you could tell the
      > Tracker2 to start sending all received packets as messages to the Nüvi
      > so you could see what it was grabbing, or at least maybe something
      > like "the next xxx packets" so it wouldn't go into a loop you couldn't
      > get out of from the Nüvi iteself.

      Hmm, that's not a bad idea. I'll put it on my list of things to try.

      Scott
    • Show all 13 messages in this topic