Loading ...
Sorry, an error occurred while loading the content.

16442Re: [tracker2] tracker3 act led

Expand Messages
  • crazy_doctor60
    Apr 1, 2014
    • 0 Attachment
      Horraaay. It works.
      I connect the 5v pin and radio pin 8. and voila.
      finally, the act led is off and i can access the config again.
      thanks scott.


      ---In tracker2@yahoogroups.com, <scott@...> wrote :

      If it's got recent firmware then yes - if you power it up like that it
      should give a distinctive flash and go into safe mode.

      As for PTT IN, try connecting pin 8 on the radio connector to the 5v pin
      on the front.

      Scott

    • Show all 5 messages in this topic