15896Re: My Peet Ultimeter 800 won't talk to my new T3-301
- Sep 11, 2013OK, I managed to get the Peet serial data to the T3-301 up to +/- 5V but still no wx data making it across.
Would anyone have a working canned wx data capture I could try sending from a computer? That may help pin this down to a Peet problem or a T3-301 problem.
--- In firstname.lastname@example.org, "ve7eje" <rclists@...> wrote:
> The OT1+ was the device that was previously working and was stolen. I have not been able to get the 301 to work with the 800 at all. I even sent the 800 control head and IO module back to Peet for repair. Just got it back and still no communication although the serial output does look cleaner than when I sent it away.
> --- In email@example.com, Scott Miller <scott@> wrote:
> > Hi Rob,
> > Was the same Peet 800 working with the T3-301 you had before? Or are
> > you saying the OT1+ was the device that was stolen?
> > Scott
> > On 9/9/2013 8:34 PM, ve7eje wrote:
> > > This has been driving me nuts for a while so I am hoping someone here
> > > has made this work. I recently replaced an OT1+ and Icom handheld with a
> > > T3-301. That combo worked great for several years until some miscreant
> > > decided they wanted it more than me!
> > > My problem is that I cannot get the Peet 800 to communicate reliably
> > > with the new T3-301. The radio beacons and sends telemetry just fine but
> > > doesn't want to receive any data from the 800. It isn't a speed issue as
> > > I do get the occasional valid wx data packet sent. It acts like the
> > > RS-232 serial data from the Peet isn't being received properly by the
> > > 301. If I stick a scope on the data input at the radio I do see nice
> > > clean 5V P-P data coming from the Peet.
> > > Anyone have any suggestions? At the moment the only thing I can think of
> > > to try is to convert the 800 serial data up to true +/- 12V RS232 and
> > > try that.
> > >
> > > Thanks -Rob-
> > >
> > >
- << Previous post in topic Next post in topic >>