15707Re: [tracker2] Re: T3-Micro released
- Jul 3, 2013Dang it, when I switched from the development build to the main build I
forgot to switch to the new NMEA parser. I've fixed it and version
56476 is available for download now.
On 7/3/2013 3:34 AM, Broncus wrote:
> Hi Scott,
> Verifying with a terminal application, there are no NMEA sentences in
> the KISS data stream.
> I see other data from received beacons so the data path is good to the
> Using the latest OTWINCFG (7/1/13) and the latest beta build 56474 in
> the OT3, I added check marks to:
> USBKISS (I am using the USB port)
> NMEA P/T
> I tried with:
> HT PTT (checked or unchecked)
> The GPS is connected to Port A but I have also tried Port B. The baud
> rate is 4800. The green LED flashes once a second. And, my position has
> been updated on the APRS-IS (GPS FIX is required to transmit). I am
> suspicious of the 4800 baud since the T3-Micro requires 9600.
> Any additional hints?
> Best regards,
> Fred N7FMH
> --- In firstname.lastname@example.org <mailto:tracker2%40yahoogroups.com>,
> "Broncus" <fmhillhouse@...> wrote:
> > I re-read it again and that smacked me right between the eyes.
> Somewhere in the queue, I have a follow-up.
> > Thanks!
> > Best regards,
> > Fred N7FMH
> > --- In email@example.com <mailto:tracker2%40yahoogroups.com>,
> Scott Miller <scott@> wrote:
> > >
> > > > If I set GPSDATA ON, will this pass GPS sentences through the
> USBKISS port?
> > > > What sentences are sent?
> > >
> > > GPSDATA is for reporting HDOP and number of satellites in the status
> > > text. Did you check out the wiki page for the micro? The command
> > > you're looking for is NMEAPASS ON. It'll pass GPRMC and GPGGA.
> > >
> > > Scott
> > >
- << Previous post in topic Next post in topic >>