Loading ...
Sorry, an error occurred while loading the content.

15609RE: [tracker2] Opentracker USB and my Raspberry Pi version

Expand Messages
  • Vivien BRULE
    May 30, 2013
      Hi Scott,

      I have a BDM programmer and try to upload some of the firmware that I've found here : http://www.argentdata.com/support/firmware/JM60/

      Is there a bootloader elsewhere?

      Thanks for your help

      73 Vivien

      -----Message d'origine-----
      De : tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] De la part de Scott Miller
      Envoyé : jeudi 30 mai 2013 17:08
      À : tracker2@yahoogroups.com
      Objet : Re: [tracker2] Opentracker USB and my Raspberry Pi version

      If you built it from scratch, you'll need a BDM programmer to load the bootloader.


      On 5/30/2013 4:57 AM, Vivien BRULE wrote:
      > [Attachment(s) <#TopText> from Vivien BRULE included below]
      > Hi everybody,
      > I've used the schematic that I found on argentdata to try to make a
      > raspberry Pi version of the opentrackerUSB (see the schematic in the mail).
      > I've tried to upload some firmware, but nothing light on the board and
      > no communication with it.
      > So please is there someone that can take a look at my work and tell me
      > if and where I going worong.
      > Thanks a lot.
      > &n bsp;
      > Have a nice day
      > 73 Vivien


      Yahoo! Groups Links
    • Show all 7 messages in this topic