Loading ...
Sorry, an error occurred while loading the content.

15432Re: New user question

Expand Messages
  • captnkliegle
    Apr 7, 2013
      Can you post the parameters programmed into the OT?

      If the TXDelay is not long enough (ie using a radio thats slow to keyup on PTT) you may be losing the first few bits/bytes of data at the receive site. If the digipeater is squelched (not running with squelch open), the time delay of opening the squelch and passing audio could be long enough to kill your packet.

      What TXD are you running? Try extending it and listen with another radio for the tell tale sound of your packet being digi'ed. Just don't leave it on 500mS! hi hi

      Kriss KA1GJU

      --- In tracker2@yahoogroups.com, "jakewf8s" <jacobwtennant@...> wrote:
      > I have just received my OT-USB device and have set it up to be used as a tracker.
      > However I have not been able to get it to be digipeated?
      > I have tested it with my home station which hears it just fine as does the few locals also running APRS.
      > I have listened to the packets compared to other stations and all sounds correct (been playing with APRS since 1994).
      > The digi repeats every other station in my local area just fine as I also the sysop of the digi and have checked out the digi station.(W8MWA-5)
      > Even when I was line of sight to the digi at 1 mile I could never get any packets digipeated?
      > Any suggestions?
    • Show all 5 messages in this topic