Loading ...
Sorry, an error occurred while loading the content.

15286Re: OT USB Port A TEXT mode

Expand Messages
  • n9tkf
    Feb 27, 2013
    • 0 Attachment
      The attached firmware worked great. I am putting the text in to Port A and the OT USB beacons as programmed.

      John
      N9TKF

      --- In tracker2@yahoogroups.com, Scott Miller <scott@...> wrote:
      >
      > Apparently at some point that behavior was by design, but I couldn't
      > tell you what my reasoning was. It was bypassing timed transmissions in
      > TEXT mode, but only for port A.
      >
      > Try the attached firmware version. Or switch to port B if you need to
      > stick with the current release.
      >
      > Scott
      >
      > On 2/21/2013 5:12 PM, n9tkf wrote:
      > > I programmed Port A to Auto and to beacon every 120 secs. The tracker
      > > sent a beacon every 120 secs. I programmed the Tracker Port A to TEXT
      > > Port B to AUTO and it will send the text telemetry from the Arduino but
      > > will not send a beacon. Maybe a setting is wrong on my setup?
      > >
      > > John
      > > N9TKF
      > >
      > > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > > Scott Miller wrote:
      > > >
      > > > I don't think having it in TEXT mode should affect normal beacon
      > > > operation. Does it beacon when you have it in AUTO mode?
      > > >
      > > > Scott
      > > >
      > > > On 2/21/2013 10:13 AM, n9tkf wrote:
      > > > > Is the OT USB capable of sending out a Fixed position packet while Port
      > > > > A is in the TEXT mode? I am using an Arduino Uno to send a formated
      > > > > plain text telemetry message to Port A in the TEXT mode. I have tried
      > > > > several different settings but can not get the OT USB to send a
      > > position
      > > > > packet.
      > > > >
      > > > > John
      > > > > N9TKF
      > > > >
      > > > >
      > > >
      > >
      > >
      >
    • Show all 9 messages in this topic