Loading ...
Sorry, an error occurred while loading the content.

15254Re: OT3m power relay on after digi

Expand Messages
  • Thomas
    Feb 13, 2013
      I am using the USEALIAS 1 ON/OFF command, good idea to set up a script
      I will try that

      Thomas

      --- In tracker2@yahoogroups.com, Scott Miller wrote:
      >
      > How are you turning on and off the digi function? You could probably
      > set up a script to do what you want.
      >
      > Scott
      >
      > On 2/11/2013 6:29 AM, Thomas wrote:
      > >
      > >
      > > --- In tracker2@yahoogroups.com ,
      > > Scott Miller wrote:
      > > >I understand the reason for that design. I am using the OT as an
      > > unattended tracker and let the OT power up my radio when it's time for a
      > > beacon. In attended mode I power on my radio manually and turn on the
      > > digi function. When I go back to unattended mode I have to "power down"
      > > the relay with the power off command or switch the power off and on to
      > > the tracker.
      > > Otherwise I leaves my radio with the power on.
      > > But I can handle the situation know when I am aware of the design.
      > >
      > > Thanks
      > > /Thomas
      > >
      > > > It was always assumed in the design that you wouldn't use power control
      > > > with a digi, since it can't receive packets to digipeat when it's turned
      > > > off...
      > > >
      > > > Scott
      > > >
      > > > On 2/9/2013 2:11 AM, Thomas wrote:
      > > > > It seems to be the same problem with power control when digi as for
      > > aprs
      > > > > message.
      > > > > I am using my excellent tracker as a digipeater but the power relay
      > > > > stays on after sending out the packet
      > > > > Firmware: 56330
      > > > >
      > > > > Thomas SM0YOS
      > > > >
      > > > >
      > > >
      > >
      > >
      >
    • Show all 6 messages in this topic