15253Re: [tracker2] Re: OT3m power relay on after digi
- Feb 12 3:30 PMHow are you turning on and off the digi function? You could probably
set up a script to do what you want.
On 2/11/2013 6:29 AM, Thomas wrote:
> --- In email@example.com <mailto:tracker2%40yahoogroups.com>,
> Scott Miller wrote:
> >I understand the reason for that design. I am using the OT as an
> unattended tracker and let the OT power up my radio when it's time for a
> beacon. In attended mode I power on my radio manually and turn on the
> digi function. When I go back to unattended mode I have to "power down"
> the relay with the power off command or switch the power off and on to
> the tracker.
> Otherwise I leaves my radio with the power on.
> But I can handle the situation know when I am aware of the design.
> > It was always assumed in the design that you wouldn't use power control
> > with a digi, since it can't receive packets to digipeat when it's turned
> > off...
> > Scott
> > On 2/9/2013 2:11 AM, Thomas wrote:
> > > It seems to be the same problem with power control when digi as for
> > > message.
> > > I am using my excellent tracker as a digipeater but the power relay
> > > stays on after sending out the packet
> > > Firmware: 56330
> > >
> > > Thomas SM0YOS
> > >
> > >
- << Previous post in topic Next post in topic >>