Loading ...
Sorry, an error occurred while loading the content.

15005Re: [tracker2] Re: T3 135

Expand Messages
  • Scott Miller
    Dec 10, 2012
      The T3-135 (unlike the T3-301) can't run on USB power, so you have to
      have it powered up in the radio.

      Scott

      On 12/9/2012 5:41 AM, Dealmeister wrote:
      >
      >
      > Scott et al,
      >
      > Thanks - that is what I wanted to know. So, I can use the config program
      > with USB cable to set the TNC's parameters, and the TNC will be powered
      > by the USB cable during programming before insertion into the radio. Do
      > I have this right?
      >
      > This is similar to the DSTAR boards I use. Please confirm I need only a
      > USB cable to setup the board before insertion (i.e. no null adaptors, etc).
      >
      > Alinco's architecture with the DB9 etc is something I'm not familiar
      > with hence the question. This will be my first purchase of an Argent
      > board and is intended for a second permanent digi in Florida. I've
      > already started looking for site #3, so hoping this install goes smoothly.
      >
      > I'll look for your response. Could not find the T3 135 Manual which
      > probably answers my questions.
      >
      > Thanks, Chris KB1RXA
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > Scott Miller <scott@...> wrote:
      > >
      > > It can't be programmed from the menu, but you can program the T3-135
      > by USB.
      > >
      > > Scott
      > >
      > > On 12/8/2012 8:15 AM, Dealmeister wrote:
      > > > Quick question:
      > > >
      > > > Can the T135 be programmed from the radio's menu or is a programming
      > > > cable required. I've acquired another permanent digipeater location and
      > > > plan to use the T3 135.
      > > >
      > > > Thanks
      > > >
      > > > Chris KB1RXA
      > > >
      > > >
      > >
      >
      >
    • Show all 12 messages in this topic