Loading ...
Sorry, an error occurred while loading the content.

14374Re: [tracker2] Nuvi 350 T2301

Expand Messages
  • Scott Miller
    Jul 19, 2012
    • 0 Attachment
      You won't get continuity through the level shifter circuit in the 813
      cable. Pinouts for DB9 female should be 2-yellow, 3-white, 5-black/brown.

      You might try reloading the firmware on the T2, also.

      Scott

      On 7/19/2012 3:43 PM, Dave Miller wrote:
      > My system that has been working for years stopped working.
      > The current Symptoms are Nuv-350 is showing the not connected symbol on
      > the display.
      >
      > I have checked that the T2-301 Tx's OK using OTconfig and a dummy load
      > by using the Tune command.
      >
      > I have changed out the -0183 cable between the T301 and the Nuvi unit
      > with a new one. Seemed to have troubles getting continuity with a meter
      > on the old cable. Where is the pinout for the -0183 cable.
      > Fuses are OK and power seems to be getting to the T2.
      >
      > Does this mean the Nuvi has an issue?
      >
      > Thanks
      > Dave
      > VE7PKE
      >
      >
    • Show all 7 messages in this topic