Loading ...
Sorry, an error occurred while loading the content.

1115RE: [tracker2] Re: Progress

Expand Messages
  • scott@opentrac.org
    Oct 16, 2006
      Cool, I'll post an update this week.  The tricky part right now is getting the parsers to figure out what sort of data is coming in on each port, and to make sure the parser state machines don't get screwed up by data from the other port when there's not enough memory to allocate a state machine for each parser+port combination.
      The good news is that once I get it sorted out, you won't have to tell it what port the weather station, GPS receiver, or whatever is going to be hooked up to.  It'll just figure it out on its own.  I'm also going to try an autobaud algorithm, so with some luck you won't even need to tell it what baud rate to expect.

      From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of k0yg
      Sent: Monday, October 16, 2006 12:20 PM
      To: tracker2@yahoogroups.com
      Subject: [tracker2] Re: Progress

      Hi Scott,

      I have a Peet Brothers 2000 that is up and running. It doesn't have
      the optional humidity sensor. All I need to do is plug it in to the T2.


      --- In tracker2@yahoogroup s.com, <scott@...> wrote:
      > I've got Peet Bros weather station support working on both serial
      ports -
      > needs a little more work to keep from getting confused if it's
      getting both
      > NMEA and Wx. Anyone got an Ultimeter 2000 series to hook up for
      > I'm trying to come up with a low part count, adjustable sensitivity
      > level interface for the piezo motion sensor. Not really sure what
      the best
      > approach to this is, since it needs to detect millivolt level
      signals, but
      > if you thump the sensor it can generate tens of volts and blast a
      FET gate.
      > Scott

    • Show all 11 messages in this topic