Loading ...
Sorry, an error occurred while loading the content.

Messages List

6481

Paralite Top80 paramotor and 27MSilex wing for sale $1,000

2003 Paralite Skycruiser Top80 and 27M Silex wing for sale. 274 hours on motor. I had a prop blade sling in flight, the ensuing imbalance caused the redrive to
Lane
Apr 24
#6481
 
6480

Re: exhaust O-ring and sealant

every acetic silicone can be used some are added with metallic powder and they normally resist to higher temperature, normally they are red or black. normally
perilvolo
Apr 3
#6480
 
6479

exhaust O-ring and sealant

Hello Top80 pilots, Do you add any any sealants when replacing the exhaust O-rings? If you do, what type/brand to look for? Any application tips? Thanks, Szabi
sarkoziszabi
Apr 3
#6479
 
6478

Re: engine won't start

if water had entered the engine, you wouldn`t have reached the landing site. After several start attempts, do you see fuel on the spark plug now? I would still
sarkoziszabi
Apr 3
#6478
 
6477

engine won't start

I was practice water touch nearby the beach about 20 minutes. launch and landing everything ran normally. I took about 30 minutes break, after that the engine
e02f2adaedfcadfea15f99989ee41049
Apr 2
#6477
 
6476

Re: Cylinder Base Gaskets

During a short time some Top 80's had a 1mm Aluminum head gasket (spacer) along with the appropriate fiber gasket between the cylinder and the crank case deck
cbobfly1
Feb 19
#6476
 
6475

Re: Cylinder Base Gaskets

During a short time some Top 80's had a 1mm Aluminum head gasket (spacer) along with the appropriate fiber gasket between the cylinder and the crank case deck
cbobfly1
Feb 19
#6475
 
6474

Re: Cylinder Base Gaskets

Diego is at: Miniplane.net Miniplane.it Miniplane.com Mention the spacer to him, also send clear photos of the cylinder and its gaskets. Keith Pickersgill
Keith Pickersgill
Feb 19
#6474
 
6473

Re: Cylinder Base Gaskets

Yes there is a spacer under spark plug ! Do you have contact info for Diego ? From: top80@yahoogroups.com [mailto:top80@yahoogroups.com] Sent: Sunday, February
Alan
Feb 19
#6473
 
6472

Re: Cylinder Base Gaskets

The correct procedure is to initially temporarily assemble the cylinder and head without any gaskets, then measure the squish clearance, then order the
Keith Pickersgill
Feb 19
#6472
 
6471

Cylinder Base Gaskets

Hello , My Top 80 cylinder base gasket was blown out and discharging oil out so I took head & cylinder off to replace gasket. What I found was 2 gaskets ,one
asnowmannn
Feb 19
#6471
 
6470

Re: Difference of propellers

I believe the 19:73 is standard redrive. I have used both propellers with this redrive. I broke my helix foot dragging in the desert. Caught a rock. I had
seitzjoe
Feb 16
#6470
 
6469

Re: Difference of propellers

I am in the process of purchasing a new miniplane and would also like to know any feedback on the eProp vs the Helix (T2HA), I see there are three variations
pintail120
Feb 16
#6469
 
6468

Re: No low speed revs

I've had coil issues that exhibit problems at high revs and no idle. I also found that if I touched the ht lead is get a shock, so the insulation was breaking
Nick Wood
Feb 9
#6468
 
6467

Re: No low speed revs

Good point about the coil. In case of coil issues, wouldn't the issue manifest itself at higher RPM rather than idle? I thought about coil, but it's such a
Remy Faures
Feb 8
#6467
 
View First Topic Go to View Last Topic