Loading ...
Sorry, an error occurred while loading the content.

Re: RMS Express issue with TNC-X

Expand Messages
  • ke7tjk
    Is there a driver for Windows 7 64 bit? The driver download from FTDI isn t working.
    Message 1 of 6 , Nov 26, 2011
    • 0 Attachment
      Is there a driver for Windows 7 64 bit?

      The driver download from FTDI isn't working.

      --- In tnc-x@yahoogroups.com, "Don Rolph" <don.rolph@...> wrote:
      >
      > Is your TNC-X connected with a serial cable or a USB cable?
      >
      >
      >
      > From: tnc-x@yahoogroups.com [mailto:tnc-x@yahoogroups.com] On Behalf Of
      > ke7tjk
      > Sent: Friday, October 07, 2011 8:40 PM
      > To: tnc-x@yahoogroups.com
      > Subject: [tnc-x] RMS Express issue with TNC-X
      >
      >
      >
      >
      >
      > RMS Express gives me a failure to initialize message when attempting to open
      > a session.
      >
      > I can unplug the TNC-X from my computer, plug it back in, and most of the
      > time it will initialize, and work fine. However, about one out of three
      > times RMS Express displays an error message, saying it must close. When I
      > attempt to reopen RMS Express, and start a session, the TNC-X fails to
      > initialize. If I unplug from the computer again, and let it sit, it will
      > work again for a couple of sessions before repeating the errors.
      >
      > Is there different settings in RMS Express that I should use other than the
      > default? I'm running XP 32bit, and using the USB otion on the TNC-X.
      >
      > Any help is greatly appreciated!!
      >
    • Mike Miller
      FTDI drivers can be found at: Maybe the latest driver will help, the release notes indicate some bug fixes. Mike
      Message 2 of 6 , Nov 26, 2011
      • 0 Attachment
        FTDI drivers can be found at:
        <http://www.ftdichip.com/Drivers/VCP.htm>

        Maybe the latest driver will help, the release notes indicate
        some bug fixes.

        Mike kc9doa



        On 26 Nov 2011 at 8:02, ke7tjk wrote:

        > Is there a driver for Windows 7 64 bit?
        >
        > The driver download from FTDI isn't working.
        >
        > --- In tnc-x@yahoogroups.com, "Don Rolph" <don.rolph@...>
        > wrote:
        > >
        > > Is your TNC-X connected with a serial cable or a USB cable?
        > >
        > >
        > >
        > > From: tnc-x@yahoogroups.com [mailto:tnc-x@yahoogroups.com] On
        > Behalf Of
        > > ke7tjk
        > > Sent: Friday, October 07, 2011 8:40 PM
        > > To: tnc-x@yahoogroups.com
        > > Subject: [tnc-x] RMS Express issue with TNC-X
        > >
        > >
        > >
        > >
        > >
        > > RMS Express gives me a failure to initialize message when
        > attempting to open
        > > a session.
        > >
        > > I can unplug the TNC-X from my computer, plug it back in, and
        > most of the
        > > time it will initialize, and work fine. However, about one
        > out of three
        > > times RMS Express displays an error message, saying it must
        > close. When I
        > > attempt to reopen RMS Express, and start a session, the TNC-X
        > fails to
        > > initialize. If I unplug from the computer again, and let it
        > sit, it will
        > > work again for a couple of sessions before repeating the
        > errors.
        > >
        > > Is there different settings in RMS Express that I should use
        > other than the
        > > default? I'm running XP 32bit, and using the USB otion on the
        > TNC-X.
        > >
        > > Any help is greatly appreciated!!
        > >
        >
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.