Loading ...
Sorry, an error occurred while loading the content.

29948RE: [tmboptical] Re: CNC 4 inch focuser modification

Expand Messages
  • Terry Tuggle
    Feb 1, 2006

      Tim sent me a PDF on disassembly for my Mod, I will post that in the
      files, and Thomas has asked me to combine his writ-up and my additional
      comments into one procedure, which I will do after I receive and reassemble
      my scope.



      From: tmboptical@yahoogroups.com [mailto:tmboptical@yahoogroups.com] On
      Behalf Of Wayne G
      Sent: Wednesday, February 01, 2006 3:48 PM
      To: tmboptical@yahoogroups.com
      Subject: [tmboptical] Re: CNC 4 inch focuser modification

      Hi Harvey,

      Date: Wed, 01 Feb 2006 12:51:58 -0000
      From: "mrgrytt" <mrgrytt@...>
      Subject: Re: CNC 4 inch focuser modification

      Even though it's not very difficult for a person to 'do it
      themself' it's a scary thing to recommend, particularly if they don't
      feel comfortable about it. I wouldn't want to see anyone take a
      chance of hurting their scope.

      [WG: ] I've been looking into doing this as well to my own 152 for a
      few years now, as sometimes my rotating section can go from turning very
      easy and smooth to being suddenly jammed up so tight that no effort at
      forward movement helps and I end up knocking the whole scope out of
      position and losing the object trying to get it loose again.

      I always intend to look into the matter 'later' but end up putting the
      scope away and forgetting about it until the next time I take it out!

      Obviously, it would seem that the heart of the problem is that there is
      nothing other than the three set screws riding in the channel which both
      hold and guide the rotating sleeve in its motions.

      But I also hope/think it very likely that if I follow Thomas' adjustment
      procedures recently published (thanks Tom), this will probably either
      greatly ameliorate or even largely eliminate the problem to any
      reasonable extent, which I will try some day soon when I get the chance.
      But there is still the likelihood of the problem returning again later I
      fear. The key is in taking the weight off of the groove walls and
      eliminating the friction between them and the screws (which your
      modification accomplishes).

      However, as I do my own machining, I will be eventually settling on some
      solution of my own choosing--- I suspect there is more than one way to
      address the issue, and correct the deficiency so as to entirely
      eliminate it from coming back again and further improving the smoothness
      and stability of the rotating collar, which is imminently superb when it
      is working well.

      To be honest, my own ideas to this problem have been to take an entirely
      different approach to the one that you and Tim have chosen, but we
      shall see once I have the parts all apart in my hands what I will

      In the meantime, as to your comments above, what I would ask and propose
      here is for maybe you, Tim, or some other enterprising and magnanimous
      person to put together a detailed description and drawings/photos of the
      disassembly, reassembly, and any other pertinent points, obstacles or
      hurdles for anyone undertaking such an improvement/modification of their
      focuser to follow, and maybe put it in the files section for all of us
      to refer to?

      I've looked at Tim's pictures of the parts, both privately as well as
      those recently published here, but they always leave me some questions
      as to what the issues were in taking it apart. Mechanically inclined as
      I am, I would feel better (as I think many would who are considering
      this) knowing exactly what they are getting into before taking a very
      expensive product like this apart. I think it is the time now for a
      detailed and thorough article on addressing this matter safely and with
      minimal risk, much like many others have published articles on taking
      apart corrector plates on SCTs and fixing loose primaries, mirror flop
      and focus shift. The fact that you say above that the procedure is not
      very difficult tells me that it is really quite simple once you see how
      the scope is put together, which obviously was designed to be very
      robust, as all TMB products have been!

      Can I compel you to be our volunteer to create such a document for us?
      :-) You wouldn't be recommending anything, just giving us the dry facts
      of what is involved and a roadmap based on your own knowledge and





      magazine&w3=Astronomy&c=3&s=48&.sig=futZRZpaAgNPqk1ni_L7jQ> magazine




      * Visit your group "tmboptical
      <http://groups.yahoo.com/group/tmboptical> " on the web.

      * To unsubscribe from this group, send an email to:

      * Your use of Yahoo! Groups is subject to the Yahoo!
      <http://docs.yahoo.com/info/terms/> Terms of Service.


      [Non-text portions of this message have been removed]
    • Show all 16 messages in this topic