Loading ...
Sorry, an error occurred while loading the content.

Re: [teslafy] Flux Capacitor Jpegs/Error in Phase amperage

Expand Messages
  • harvey norris
    ... This amperage meter was inadvertantly placed on the node measuring amperage consumptions for both phases. That is typically 1.7 the average value for both
    Message 1 of 2 , Sep 28 10:15 AM
    • 0 Attachment
      --- Harvey D Norris <harvich@...> wrote:
      > I have established a flux capacitor folder at
      > http://groups.yahoo.com/group/teslafy/files/
      >
      > The no field jpeg shows the upper left meter as a 2
      > volt stator
      > input. The meter below shows that axial water caps
      > resonant phase
      > comsumption of 2.1 ma
      This amperage meter was inadvertantly placed on the
      node measuring amperage consumptions for both phases.
      That is typically 1.7 the average value for both
      phases, but in this case it seems to be twice, instead
      of 1.7. This of course throws a monkeywrench into
      former conclusions. When time permits this (jpeg)will
      be redone to show all 3 amperage consumptions.

      A temporary setback perhaps, but time will tell. But
      here you have a process very unique, postulated to
      cause a breaking down of electrolysis barriers. Before
      you even stick those electrodes in the water, the
      water itself from cohered fields is delivering current
      of its own accord. It is very remarkarble, to say the
      least. That is the optimistic viewpoint. Work will
      continue.

      The next meter shows 54.5
      > volts as the first
      > DSR midpoint voltage rise. The last meter shows
      > 156.7 volts across
      > one of the two bulbs in series. This is a non firing
      > voltage. The
      > bulbs are inputed by equidistant water clips from
      > the outer plate,
      Those red and green clips can be seen in the no field
      jpeg, while not very recognizable in the 16.5 volt
      jpeg.
      > thus being equal potential in the axial electric
      > field itself, but
      > subject to the additional influence of phase 2's
      > magnetic field
      > interaction, thus generating voltage on equal points
      > of axial
      > electric fields potential.
      >
      > The next jpeg is with meters showing the same
      > conditions with a 16.5
      > volt stator input. That jpeg has also been placed at
      > message board,
      > with some more comments.
      >
      > Sincerely HDN Binary Resonant System
      > http://members3.boardhost.com/teslafy/



      =====
      Binary Resonant System http://members3.boardhost.com/teslafy/

      __________________________________________________
      Do You Yahoo!?
      Listen to your Yahoo! Mail messages from any phone.
      http://phone.yahoo.com
    Your message has been successfully submitted and would be delivered to recipients shortly.