Re: [teslafy] Flux Capacitor Jpegs/Error in Phase amperage
- --- Harvey D Norris <harvich@...> wrote:
> I have established a flux capacitor folder atThis amperage meter was inadvertantly placed on the
> The no field jpeg shows the upper left meter as a 2
> volt stator
> input. The meter below shows that axial water caps
> resonant phase
> comsumption of 2.1 ma
node measuring amperage consumptions for both phases.
That is typically 1.7 the average value for both
phases, but in this case it seems to be twice, instead
of 1.7. This of course throws a monkeywrench into
former conclusions. When time permits this (jpeg)will
be redone to show all 3 amperage consumptions.
A temporary setback perhaps, but time will tell. But
here you have a process very unique, postulated to
cause a breaking down of electrolysis barriers. Before
you even stick those electrodes in the water, the
water itself from cohered fields is delivering current
of its own accord. It is very remarkarble, to say the
least. That is the optimistic viewpoint. Work will
The next meter shows 54.5
> volts as the firstThose red and green clips can be seen in the no field
> DSR midpoint voltage rise. The last meter shows
> 156.7 volts across
> one of the two bulbs in series. This is a non firing
> voltage. The
> bulbs are inputed by equidistant water clips from
> the outer plate,
jpeg, while not very recognizable in the 16.5 volt
> thus being equal potential in the axial electric=====
> field itself, but
> subject to the additional influence of phase 2's
> magnetic field
> interaction, thus generating voltage on equal points
> of axial
> electric fields potential.
> The next jpeg is with meters showing the same
> conditions with a 16.5
> volt stator input. That jpeg has also been placed at
> message board,
> with some more comments.
> Sincerely HDN Binary Resonant System
Binary Resonant System http://members3.boardhost.com/teslafy/
Do You Yahoo!?
Listen to your Yahoo! Mail messages from any phone.