7th Embodiment of 3 phase Air Core Transformer.
- It is here where the voltage supply can be hopefully interacted with a tesla primary, to again demonstrate a working wireless TC. This has been demonstrated in the first two embodiments, but not later ones for reasons of combinations of voltage secondary inputs. For the single secondary case, the primary arc, in series with the tesla primary uses a 50 nf capacity. That capacity has been formerly found by tuning the coil, where the values for a 250,000 hz resonance are established and known where the primary uses five winds. For the making of this magnificent principle whereby the wireless tesla coil itself becomes possible; THE CAPACITY USED FOR THE SOURCE FREQUENCY SERIES RESONANCE WILL USE THE RESONANT RISE OF VOLTAGE IN THE CIRCUIT TO CHARGE THE CAPACITY TO A VOLTAGE BEYOND ITS SOURCE; BUT THAT SAME CAPACITY CAN BE USED IN THE ADJOINING HIGH FREQUENCY TESLA COIL BY ITS DESIGN AND MODIFICATION THAT ITS PRIMARY WILL BE IN SERIES WITH THE ARC GAP. When the gap fires the circuit goes from a resonant state to a reactive one and thus drawing less amperage effectively quenches the arc.
Now what must happen when two secondaries are combined for voltage application, NOW THE ARC WILL BE IN BETWEEN TWO CAPACITIES; INSTEAD OF BEING IN PARALLEL TO THE SOLITARY CAPACITY FOUND ON A SINGLE LC LOOP. This then implies that the capacities in the circuit must be appearing in series with the arc, thus the working C value to be shared with the tesla coil will have been halved. To conpensate then it is predicted that twice the primary inductance should be used.
This 7th embodiment uses only 2 of the three phases of pancake coils as primaries, but it has produced the highest voltage yet for an unenergized field state, some 370 volts. I have made a video showing the process powering a ferrite ballasted xenon bulb, and will send a preliminary pic..