Fw: Cutting Thin Grooves for C-clips
- Pass Along HSMHi all
I thought this tip from the Home Shop Machinist was especially useful. enjoy it!
Pens, plans and projects online at
----- Original Message -----
From: The Home Shop Machinist
Sent: Wednesday, April 03, 2013 12:13 PM
Subject: Cutting Thin Grooves for C-clips
View this email in your browser.
Cutting Thin Grooves for C-clips
By Stacey Olson
I've always used old hacksaw blades to cut thin grooves for C-clips. It works, but I got tired of the blade bending or wobbling if the setup wasn't perfect. Recently, I found some small circular saw blades that looked like they might be the solution to my problem.
I turned a simple arbor to mount the blade on and to clamp in the lathe's toolholder. I kept it round so I could also use it in a collet, should the need arise. The setup is very simple using a saw blade like this. For very small pieces, all you have to do is eyeball one tooth of the blade to the centerline of the workpiece.
Run the lathe at the same speed you would for any other grooving or cutoff procedure � slow. I was surprised at how sturdy the saw was and how clean the cut was for both grooving and cutoffs.
Thanks Stacey, your subscription has been extended by an issue!
Please do us a tremendous favor and forward this email on to your machining friends!
Do you have a tip you'd like to share with others in the metalworking hobby? If so, please contact us at daronklooster@...
Village Press, Inc. Publications, 2779 Aero Park Dr., Traverse City, MI 49686
Unsubscribe to Pass Along Emails
[Non-text portions of this message have been removed]