Loading ...
Sorry, an error occurred while loading the content.

Re: [taigtools] Re: Flood Enclosure.

Expand Messages
  • Paul J. Ste. Marie
    ... Which brand? The one I was looking at (KoolMist) claims that their formula is harmless to operators and ends problems of mist fog fumes . I d love to
    Message 1 of 45 , Dec 2, 2012
    • 0 Attachment
      On 12/2/2012 4:44 AM, Boman33 wrote:
      > I tried a mist system but did not like the mist that eventually spread and
      > was bad the breathe.

      Which brand? The one I was looking at (KoolMist) claims that their
      formula "is harmless to operators and ends problems of mist fog fumes".

      I'd love to hear about real-life experience with that.
    • Will Schmit
      FWIW, I raised all of the bearing surfaces of my rig with MDF, then fiberglassed it. ________________________________ From: Boman33 To:
      Message 45 of 45 , Dec 6, 2012
      • 0 Attachment
        FWIW, I raised all of the bearing surfaces of my rig with MDF, then fiberglassed it.




        ________________________________
        From: Boman33 <boman33@...>
        To: taigtools@yahoogroups.com
        Sent: Wednesday, December 5, 2012 7:55 PM
        Subject: RE: [taigtools] Re: Flood Enclosure.


         
        Thanks for all the good suggestions. Many of them would work fine although
        I have not seen anything yet that I like to copy. My current assumption is
        a custom DIY tub and then Lexan sided panels that can easily be removed.

        By now I am basically done with the design and now comes the question of
        where to find the time to build it.

        Bertho

        [Non-text portions of this message have been removed]




        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.