Loading ...
Sorry, an error occurred while loading the content.
 

Re: [taigtools] Re: set/cap screw sizes

Expand Messages
  • Nicholas Carter and Felice Luftschein
    Yup, all are #10-32 ... -- felice@casco.net is Nicholas Carter and Felice Luftschein. See our homepage at www.cartertools.com/nfhome.html
    Message 1 of 5 , Feb 29, 2008
      Yup, all are #10-32

      morbid0000 wrote:
      > All are 10/32? I thought the set screws weer smaller than the
      > toolpost/slide lock screws? Must be misremembering. Thanks!!
      >
      >
      > --- In taigtools@yahoogroups.com, Nicholas Carter and Felice
      > Luftschein <felice@...> wrote:
      >> If you mean thread size, #10-32
      >>
      >> morbid0000 wrote:
      >>> Dumb question, but I'm trapped at teh office away from my beloved
      > shop,
      >>> and I can't remember what size teh set screws and cap screws on
      > the
      >>> Taig are? If anyone is near a lathe, please let me know the
      > diameter
      >>> of the following screws:
      >>>
      >>> -set screws in the tool post
      >>>
      >>> -cap screw in the tool post [I think it uses a 4mm allen wrench?]
      >>>
      >>> -cap screw to fix the tailstock in place [think its teh same as
      > tool
      >>> post?]
      >>>
      >>> -cap screw to lock the tailstock slide in place [same as above?]
      >>>
      >>> Thanks!
      >>> M
      >>>
      >>>
      >>>
      >>> To Post a message, send it to:
      >>> taigtools@yahoogroups.com
      >>>
      >>> To Unsubscribe, send a blank message to:
      >>> taigtools-unsubscribe@yahoogroups.com
      >>>
      >>> Let the chips fly!
      >>>
      >>> Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >>>
      >> --
      >> felice@... is Nicholas Carter and Felice Luftschein. See our
      >> homepage at www.cartertools.com/nfhome.html
      >>
      >
      >
      >
      >
      > To Post a message, send it to:
      > taigtools@yahoogroups.com
      >
      > To Unsubscribe, send a blank message to:
      > taigtools-unsubscribe@yahoogroups.com
      >
      > Let the chips fly!
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >

      --
      felice@... is Nicholas Carter and Felice Luftschein. See our
      homepage at www.cartertools.com/nfhome.html
    Your message has been successfully submitted and would be delivered to recipients shortly.