Loading ...
Sorry, an error occurred while loading the content.
 

Re: [taigtools] Z axis backlash

Expand Messages
  • Nicholas Carter and Felice Luftschein
    That is one very likely solution. The only other is that the nut on the leadscrew that holds the coupler half is loose. ... -- felice@casco.net is Nicholas
    Message 1 of 2 , Jul 4, 2006
      That is one very likely solution. The only other is that the nut on the
      leadscrew that holds the coupler half is loose.

      mhberkson wrote:
      > If there is backlash on the z axis, should I conclude that the z gibs
      > or the clamps holding the headstock to the z rail are too tight? It
      > seems as though the weight of the motor and headstock should eliminate
      > all backlash.
      >
      > Mitch
      >
      >
      >
      >
      >
      >
      > To Post a message, send it to: taigtools@...
      >
      > To Unsubscribe, send a blank message to: taigtools-unsubscribe@...
      >
      >
      >
      > Let the chips fly!
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
      >
      >

      --
      felice@... is Nicholas Carter and Felice Luftschein. See our
      homepage at www.cartertools.com/nfhome.html
    Your message has been successfully submitted and would be delivered to recipients shortly.