Loading ...
Sorry, an error occurred while loading the content.

RE: [stationpro] Summary Chart of Mouser Backorder Substitutes

Expand Messages
  • Jim Garland
    Don, Tnx for the info on my proposed substitute for the 12 pin Molex .156 female connector. The Mouser order form mistakenly says there are 1645 in stock!
    Message 1 of 11 , Jul 20, 2010
    • 0 Attachment

      Don,

      Tnx for the info on my proposed substitute for the 12 pin Molex .156 female connector. The Mouser order form mistakenly says there are 1645 in stock!  Fortunately, there are several other substitutes that are exact equivalents. There are many ways to skin a cat. Try either of these:

      p/n 538-09-62-6125 (229 immediate ship)

      p/n 538-09-48-3126  (200 immed. ship, 208 in 10 days)

       

      73,

      Jim W8ZR

       


      From: stationpro@yahoogroups.com [mailto: stationpro@yahoogroups.com ] On Behalf Of Don Cunningham
      Sent: Tuesday, July 20, 2010 10:20 AM
      To: stationpro@yahoogroups.com
      Subject: Re: [stationpro] Summary Chart of Mouser Backorder Substitutes

       

       

      Jim,

      I just got off the phone with Mouser checking my few backorders, and a very nice young lady says that the substitute part for the 12P Molex connector is non-stock, order only, minimum 600 pcs!!!  I can only hope that my early order for the originals is still in the queue for arrival around the 26th of July, but she also warned me that "they are running late".  Oh well, we will all survive, won't we??  HI

      73,

      Don, WB5HAK

    • Don Cunningham
      Jim, I am getting even wierder (hope that is a word) updates on the 12p Molex headers from Mouser. You gave me the other two options below as possible subs,
      Message 2 of 11 , Jul 21, 2010
      • 0 Attachment
        Jim,
        I am getting even wierder (hope that is a word) updates on the 12p Molex headers from Mouser.  You gave me the other two options below as possible subs, as I read the listings, the 6125 is 11 pin, not 12 and the 3126 is 9 pin.  Am I reading this wrong, or did your glasses slip, hi.  DigiKey shows some subs, but they are a "WD" prefix and I'm not familiar with them.  They show the 09 series Molex as "non stock".  Mouser has three of the ones I need in stock (538-09-52-3123) and the date for the other one is "TBD" and they will advise later.  Any ideas, or do I just need to be patient and see what Mouser advises??
        73,
        Don
        ----- Original Message -----
        Sent: Tuesday, July 20, 2010 12:15 PM
        Subject: RE: [stationpro] Summary Chart of Mouser Backorder Substitutes

         

        Don,

        Tnx for the info on my proposed substitute for the 12 pin Molex .156 female connector. The Mouser order form mistakenly says there are 1645 in stock!  Fortunately, there are several other substitutes that are exact equivalents. There are many ways to skin a cat. Try either of these:

        p/n 538-09-62-6125 (229 immediate ship)

        p/n 538-09-48-3126  (200 immed. ship, 208 in 10 days)

        73,

        Jim W8ZR


        From: stationpro@yahoogro ups.com [mailto: stationpro@yahoogro ups.com ] On Behalf Of Don Cunningham
        Sent: Tuesday, July 20, 2010 10:20 AM
        To: stationpro@yahoogro ups.com
        Subject: Re: [stationpro] Summary Chart of Mouser Backorder Substitutes

         

        Jim,

        I just got off the phone with Mouser checking my few backorders, and a very nice young lady says that the substitute part for the 12P Molex connector is non-stock, order only, minimum 600 pcs!!!  I can only hope that my early order for the originals is still in the queue for arrival around the 26th of July, but she also warned me that "they are running late".  Oh well, we will all survive, won't we??  HI

        73,

        Don, WB5HAK



        No virus found in this incoming message.
        Checked by AVG - www.avg.com
        Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 01:36:00
      • Don Cunningham
        Jim, Sorry, I fat fingered that last. The recommended DigiKey sub is WM13539-ND. It sure looks like it would work, and shows to be in stock. I ll order 4 of
        Message 3 of 11 , Jul 21, 2010
        • 0 Attachment
          Jim,
          Sorry, I fat fingered that last.  The recommended DigiKey sub is WM13539-ND.  It sure looks like it would work, and shows to be in stock.  I'll order 4 of those and cancel Mouser if that will work.
          Thanks,
          Don, WB5HAK
          ----- Original Message -----
          Sent: Tuesday, July 20, 2010 12:15 PM
          Subject: RE: [stationpro] Summary Chart of Mouser Backorder Substitutes

           

          Don,

          Tnx for the info on my proposed substitute for the 12 pin Molex .156 female connector. The Mouser order form mistakenly says there are 1645 in stock!  Fortunately, there are several other substitutes that are exact equivalents. There are many ways to skin a cat. Try either of these:

          p/n 538-09-62-6125 (229 immediate ship)

          p/n 538-09-48-3126  (200 immed. ship, 208 in 10 days)

          73,

          Jim W8ZR


          From: stationpro@yahoogro ups.com [mailto: stationpro@yahoogro ups.com ] On Behalf Of Don Cunningham
          Sent: Tuesday, July 20, 2010 10:20 AM
          To: stationpro@yahoogro ups.com
          Subject: Re: [stationpro] Summary Chart of Mouser Backorder Substitutes

           

          Jim,

          I just got off the phone with Mouser checking my few backorders, and a very nice young lady says that the substitute part for the 12P Molex connector is non-stock, order only, minimum 600 pcs!!!  I can only hope that my early order for the originals is still in the queue for arrival around the 26th of July, but she also warned me that "they are running late".  Oh well, we will all survive, won't we??  HI

          73,

          Don, WB5HAK



          No virus found in this incoming message.
          Checked by AVG - www.avg.com
          Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 01:36:00
        • Don Cunningham
          Jim, Last message tonight, I promise!!!! I told you I have a vision impairment and misread the 538-09-62-6125 IS DEFINITELY 11 pin. I just made that 11 a 10
          Message 4 of 11 , Jul 21, 2010
          • 0 Attachment
            Jim,
            Last message tonight, I promise!!!!  I told you I have a vision impairment and misread the 538-09-62-6125 IS DEFINITELY 11 pin.  I just made that 11 a 10 somehow.  Nevermind, I will change my order in the morning and get that much done, then ALL I will be missing is S302!!!
            Thanks for your patience with me and others, hi
            Don, WB5HAK
            ----- Original Message -----
            Sent: Tuesday, July 20, 2010 12:15 PM
            Subject: RE: [stationpro] Summary Chart of Mouser Backorder Substitutes

             

            Don,

            Tnx for the info on my proposed substitute for the 12 pin Molex .156 female connector. The Mouser order form mistakenly says there are 1645 in stock!  Fortunately, there are several other substitutes that are exact equivalents. There are many ways to skin a cat. Try either of these:

            p/n 538-09-62-6125 (229 immediate ship)

            p/n 538-09-48-3126  (200 immed. ship, 208 in 10 days)

            73,

            Jim W8ZR


            From: stationpro@yahoogro ups.com [mailto: stationpro@yahoogro ups.com ] On Behalf Of Don Cunningham
            Sent: Tuesday, July 20, 2010 10:20 AM
            To: stationpro@yahoogro ups.com
            Subject: Re: [stationpro] Summary Chart of Mouser Backorder Substitutes

             

            Jim,

            I just got off the phone with Mouser checking my few backorders, and a very nice young lady says that the substitute part for the 12P Molex connector is non-stock, order only, minimum 600 pcs!!!  I can only hope that my early order for the originals is still in the queue for arrival around the 26th of July, but she also warned me that "they are running late".  Oh well, we will all survive, won't we??  HI

            73,

            Don, WB5HAK



            No virus found in this incoming message.
            Checked by AVG - www.avg.com
            Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 01:36:00
          • Don Cunningham
            I am up too late, making too many mistakes. I will research the DigiKey part number I sent you. I need 12 pins and 6125 from Mouser is 11 pins, sheesh.
            Message 5 of 11 , Jul 21, 2010
            • 0 Attachment
              I am up too late, making too many mistakes.  I will research the DigiKey part number I sent you.  I need 12 pins and 6125 from Mouser is 11 pins, sheesh.  Sorry for all the confusion.
              73
            • Don Cunningham
              I sure hope you read this last one first. Just disregard the other four or five. ALL the numbers you gave me ARE CORRECT. I need to proofread Mousers
              Message 6 of 11 , Jul 21, 2010
              • 0 Attachment
                I sure hope you read this last one first.  Just disregard the other four or five.  ALL the numbers you gave me ARE CORRECT.  I need to proofread Mousers "specification" pages for them.  BOTH of those are right in the heading and in the Molex datasheets, but wrong in the specifications!!!!!!!  Amazing.  Do you happen to know if the Radio Shack switch is just on-on like the Mouser one you specified for S302??  I can fix this problem if so, and change/cancel some of the Mouser order and drive to town for the missing switch, hi.  I am gone to bed, as I should have an hour ago.  Once again, sorry for all this.
                73,
                Don
              • Jim Garland
                Don, I m pretty sure my recommended substitute part numbers are correct, but I agree the Mouser page is confusing. Here s why. The Mouser search engine gives
                Message 7 of 11 , Jul 21, 2010
                • 0 Attachment

                  Don,

                  I’m pretty sure my recommended substitute part numbers are correct, but I agree the Mouser page is confusing. Here’s why. The Mouser search engine gives one the option of specifying various desired parameters when you search for specific parts. In the case of Molex connectors, the parameters include “number of positions,” “pitch,” “contact material,” etc. Next to each position is a little box, and if that box is checked then the search engine filters the search results accordingly. If the box isn’t checked, then the search engine ignores those parameters.

                   

                  In the case of “number of positions,” the box isn’t checked. Ditto for “pitch.”  What is confusing is that Mouser enters default values of  “11” for the number of positions, and “2.54mm” for pitch, even though the search results ignore both those quantities. In fact, for the substitute part numbers in my chart the correct number of positions is “12” and the correct pitch is 3.96mm. Hence the confusion.  To reassure yourself, try clicking on “Data Sheet” which will tell you more than you ever wanted to know about the Molex connectors in question!

                   

                  73,

                  Jim W8ZR

                   


                  From: stationpro@yahoogroups.com [mailto: stationpro@yahoogroups.com ] On Behalf Of Don Cunningham
                  Sent: Wednesday, July 21, 2010 8:57 PM
                  To: stationpro@yahoogroups.com
                  Subject: Re: [stationpro] Summary Chart of Mouser Backorder Substitutes

                   

                   

                  Jim,

                  I am getting even wierder (hope that is a word) updates on the 12p Molex headers from Mouser.  You gave me the other two options below as possible subs, as I read the listings, the 6125 is 11 pin, not 12 and the 3126 is 9 pin.  Am I reading this wrong, or did your glasses slip, hi.  DigiKey shows some subs, but they are a "WD" prefix and I'm not familiar with them.  They show the 09 series Molex as "non stock".  Mouser has three of the ones I need in stock (538-09-52-3123) and the date for the other one is "TBD" and they will advise later.  Any ideas, or do I just need to be patient and see what Mouser advises??

                  73,

                  Don

                  ----- Original Message -----

                  Sent: Tuesday, July 20, 2010 12:15 PM

                  Subject: RE: [stationpro] Summary Chart of Mouser Backorder Substitutes

                   

                   

                  Don,

                  Tnx for the info on my proposed substitute for the 12 pin Molex .156 female connector. The Mouser order form mistakenly says there are 1645 in stock!  Fortunately, there are several other substitutes that are exact equivalents. There are many ways to skin a cat. Try either of these:

                  p/n 538-09-62-6125 (229 immediate ship)

                  p/n 538-09-48-3126  (200 immed. ship, 208 in 10 days)

                  73,

                Your message has been successfully submitted and would be delivered to recipients shortly.