Loading ...
Sorry, an error occurred while loading the content.

Re: [stationpro] D109

Expand Messages
  • Don Cunningham
    Manuel, There were 10 of the 1n4005 s on my list, D101-D107 and D109 and two for elsewhere. Not sure what happened on your list?? 73, Don, WB5HAK
    Message 1 of 7 , Aug 14, 2010
    • 0 Attachment
      Manuel,
      There were 10 of the 1n4005's on my list, D101-D107 and D109 and two for elsewhere.  Not sure what happened on your list?? 
      73,
      Don, WB5HAK
    • Manuel Maseda
      Don, My Mouser list shows D101-D107 and D201-D203 but no D109. Perhaps Jim will be able to help. Thanks, Manuel W4SSB _____ From: stationpro@yahoogroups.com
      Message 2 of 7 , Aug 14, 2010
      • 0 Attachment
        Don,
         
        My Mouser list shows D101-D107 and D201-D203 but no D109.  Perhaps Jim will be able to help.
         
        Thanks,
         
        Manuel W4SSB


        From: stationpro@yahoogroups.com [mailto:stationpro@yahoogroups.com] On Behalf Of Don Cunningham
        Sent: Saturday, August 14, 2010 10:35 PM
        To: stationpro@yahoogroups.com
        Subject: Re: [stationpro] D109

         

        Manuel,
        There were 10 of the 1n4005's on my list, D101-D107 and D109 and two for elsewhere.  Not sure what happened on your list?? 
        73,
        Don, WB5HAK

      • Jim Garland
        Hmmm, looks like I forgot to put D109 on the parts list. I added D109 to one of the later circuit revisions, and thought I d incorporated the change into the
        Message 3 of 7 , Aug 14, 2010
        • 0 Attachment

          Hmmm, looks like I forgot to put D109 on the parts list.  I added D109 to one of the later circuit revisions, and thought I’d incorporated the change into the manual and parts list, but evidently only into the manual and not the parts list. As I recall, I specified an extra 1N4005 on the parts list, so folks would have a spare (they’re only $.07/ea), but then later I changed a 1N914 to a 1N4005 on another part of the circuit, so now builders may end up short one 1N4005 and one excess 1N914.. Hope that doesn’t cause problems. I’ll fix the error on the parts list, but feel free to interchange the 1N914 for a 1N4005 at D109..  That’s a non-critical part of the circuit and the diodes are interchangeable. Sorry for the mixup. (Also, I believe Radio Shack carries the 1N4005 (or 1N4003, 1N4007), though they’ll cost a bit more there.

          73,

          Jim W8ZR

           


          From: stationpro@yahoogroups.com [mailto: stationpro@yahoogroups.com ] On Behalf Of Manuel Maseda
          Sent: Saturday, August 14, 2010 8:55 PM
          To: stationpro@yahoogroups.com
          Subject: RE: [stationpro] D109

           

           

          Don,

           

          My Mouser list shows D101-D107 and D201-D203 but no D109.  Perhaps Jim will be able to help.

           

          Thanks,

           

          Manuel W4SSB

           


          From: stationpro@yahoogroups.com [mailto: stationpro@yahoogroups.com ] On Behalf Of Don Cunningham
          Sent: Saturday, August 14, 2010 10:35 PM
          To: stationpro@yahoogroups.com
          Subject: Re: [stationpro] D109

           

          Manuel,

          There were 10 of the 1n4005's on my list, D101-D107 and D109 and two for elsewhere.  Not sure what happened on your list?? 

          73,

          Don, WB5HAK

        • Jim Garland
          I ve added D109 (a 1N4005) to the SP-II parts list and increased the quantity from 8 to 9 on the Mouser order list. I also added the extra diode to the SP-II
          Message 4 of 7 , Aug 15, 2010
          • 0 Attachment

            I’ve added D109 (a 1N4005) to the SP-II parts list and increased the quantity from 8 to 9 on the Mouser order list. I also added the extra diode to the SP-II errata sheet. Thanks to Manual W4SSB for catching the omission.

            73,

            Jim W8ZR

          • Manuel Maseda
            Just picked up a 3 pack at RadioShack. Now back to soldering!! Manuel W4SSB _____ From: stationpro@yahoogroups.com [mailto:stationpro@yahoogroups.com] On
            Message 5 of 7 , Aug 15, 2010
            • 0 Attachment
              Just picked up a 3 pack at RadioShack.  Now back to soldering!!
               
              Manuel  W4SSB


              From: stationpro@yahoogroups.com [mailto:stationpro@yahoogroups.com] On Behalf Of Jim Garland
              Sent: Sunday, August 15, 2010 10:02 AM
              To: stationpro@yahoogroups.com
              Subject: RE: [stationpro] D109

               

              I’ve added D109 (a 1N4005) to the SP-II parts list and increased the quantity from 8 to 9 on the Mouser order list. I also added the extra diode to the SP-II errata sheet. Thanks to Manual W4SSB for catching the omission.

              73,

              Jim W8ZR

            • F5JD
              Jim, I did not change anything from your list and I received 10 1N4005. 37 512-1N4005 10 10 0 0.058 0.58 Fairchild Rectifiers 1.0a Rectifier TARIC: 8541100000
              Message 6 of 7 , Aug 15, 2010
              • 0 Attachment
                Jim,

                I did not change anything from your list and I received 10 1N4005.

                37 512-1N4005 10 10 0 0.058 0.58
                Fairchild Rectifiers
                1.0a Rectifier
                TARIC: 8541100000 ECCN:EAR99

                The first line copied from my bill must be read like this :
                37 1s the line number on my bill
                512-1N4005 is article reference
                10 = Qty ordered
                10 Qty shipped
                0.058 is the unit price
                0.58 is the price for ten

                I received 99 items. I paid 321,23 € including VAT (52.66 €)

                José F5JD

                --- In stationpro@yahoogroups.com, "Jim Garland" <4cx250b@...> wrote:
                >
                > I've added D109 (a 1N4005) to the SP-II parts list and increased the
                > quantity from 8 to 9 on the Mouser order list. I also added the extra diode
                > to the SP-II errata sheet. Thanks to Manual W4SSB for catching the omission.
                >
                > 73,
                >
                > Jim W8ZR
                >
              Your message has been successfully submitted and would be delivered to recipients shortly.