Loading ...
Sorry, an error occurred while loading the content.

Re: Thread Chart

Expand Messages
  • JohnW
    The green labeled threads are all evenly divisable by 8 (pitch of leadscrew). These can be cut by closing the 1/2 nuts at any point. You don t need the thread
    Message 1 of 3 , Oct 11, 2005
    • 0 Attachment
      The green labeled threads are all evenly divisable by 8 (pitch of
      leadscrew). These can be cut by closing the 1/2 nuts at any point.
      You don't need the thread dial at all.


      John
      --- In southbend10k@yahoogroups.com, "Bob Wright"
      <aametalmaster@y...> wrote:
      >
      > Ryan, Heres the norm,
      > All EVEN numbered threads, close 1/2 nuts at any line on the dial.
      > All ODD numbered, close 1/2 nuts at any numbered line.
      > All 1/2 threads, IE 11 1/2, close 1/2 nuts at any odd numbered
      line.
      > All 1/4 threads, IE 4 3/4, return to the origional starting point
      on
      > dial...Bob
      > --- In southbend10k@yahoogroups.com, "ryan_kittredge"
      > <ryan_kittredge@y...> wrote:
      > >
      > > Hello All,
      > > I was looking at the thread chart from the files section and was
      > > noticing all of the threads labeled in green don't show any
      marks on
      > > the thread dial below.
      > >
      > > Does this mean when you're turning these threads the half nut
      lever
      > > can be engaged anywhere with no reference from the thread dial?
      > >
      > > Thanks
      > > Ryan
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.