Loading ...
Sorry, an error occurred while loading the content.

Re: 10K Model A (1966 yr made) Motor Drive Belt

Expand Messages
  • buckskinn2
    Thank you.
    Message 1 of 8 , Feb 11, 2013
    • 0 Attachment
      Thank you.

      --- In southbend10k@yahoogroups.com, Ed wrote:
      >
      > Buck,
      >
      > Welcome to the group.
      >
      > Difficult to get a belt number, too many variables. Take your belt to
      > NAPA, they can measure it properly, then you can decide on a size
      > you want. Ask if you can exchange it if it to to big or small. Have
      > fun because they get that deer in the head lights look when you do
      > not have a car year, make, and model.
      >
      > Ed S
      >
      > At 03:05 PM 2/11/2013, you wrote:
      > >
      > >
      > > Maybe NAPA would have it?
      > >Thanks,
      > >Buck
      >
    • kabowers336
      ... This is probably close: href= http://www.usabearingsandbelts.com/m7/B35%205L380--b35-or-5l380-v-belt.html Go up one level for more selections. Keith
      Message 2 of 8 , Feb 11, 2013
      • 0 Attachment
        On Mon, 11 Feb 2013 20:05:06 -0000, you wrote:

        >Hi All,
        >
        >I am new to the group and you can call me Buck, or Buckskin...... I feel like there was divine intervention when I found this group earlier, today. I aquired a SBL 10k, model A, several months back and it was partially disassembled, but I have the QC gears, the carrage and various parts reassembled now and in good working order. The headstock was intact and I have some drag/binding issues that I am working on that I will post later if I do not resolve the problem after reading messages already posted to the group.
        >
        >But, my question now is about the V drive belt underneath in the cabinet. I replaced the flat belt, so no problem there. But, the V belt is old and ragged and slips. I measured the length of the belt at 39.75" (OD) X 5/8" wide at top. The belt reads South Bend Lathe CE-SL400 (can't make out the other number.) Anyhow, the SB product data indicates that their are two different lentgh 5/8" belts. One is 38" and the other is 40". I am sure I will need the 38" as my motor adjustment is at the max and this 39.75" slips. Do any of you know of a replacement belt number(s) for my old belt? Maybe NAPA would have it?
        >
        >Thanks,
        >Buck
        >
        >
        >
        This is probably close:
        href="http://www.usabearingsandbelts.com/m7/B35%205L380--b35-or-5l380-v-belt.html"

        Go up one level for more selections.

        Keith Bowers WB4LSJ- Thomasville, NC
      • Jim B.
        Please trim your reply. Quote only enough, of the previous post , to maintain the thread. Jim B Moderator
        Message 3 of 8 , Feb 11, 2013
        • 0 Attachment
          Please trim your reply.

          Quote only enough, of the previous post
          , to maintain the thread.
          Jim B
          Moderator
        Your message has been successfully submitted and would be delivered to recipients shortly.