Loading ...
Sorry, an error occurred while loading the content.

Need a speed sensor board

Expand Messages
  • Ray Darby
    I need a new speed sensor board for my 97 Solectria Force sedan. Anyone have one for sale or know where I could find one? ... From: Bill or Dorothy Swann To:
    Message 1 of 1 , Jan 14, 2010
    • 0 Attachment
      I need a new speed sensor board for my 97' Solectria Force sedan. Anyone have one for sale or know where I could find one?

      ----- Original Message -----
      From: Bill or Dorothy Swann
      To: solectria_ev@yahoogroups.com
      Sent: Thursday, January 14, 2010 8:23 AM
      Subject: Re: [solectria_ev] rear spring replacement



      Try a bigger hammer.

      Thanks,Bill S
      Ph 832-338-3080
      www.promotingevs.com

      ________________________________
      From: James Barton <james.barton@...>
      To: solectria_ev@yahoogroups.com
      Sent: Thu, January 14, 2010 10:07:16 AM
      Subject: Re: [solectria_ev] rear spring replacement

      It is my understanding that the rear springs were custom made for Solectria because of the added weight of the batteries. I am also fighting the stuck wheel problem on my 1997 Solectria Force.
      Jim Barton
      ----- Original Message -----
      From: Jim Coate
      To: solectria_ev@ yahoogroups. com
      Sent: Thursday, January 14, 2010 5:37 AM
      Subject: [solectria_ev] rear spring replacement

      Are the springs in the rear end stock or something custom?

      I have a 1997 Force 4-door sedan. It has been off the road for a year
      after moving. I'm replacing a bad battery and putting on new
      tires/wheels to get it ready to use again.

      However... the right rear wheel doesn't want to come off. I've been
      through multiple rounds of soaking (Kroil penetrating oil) and heating
      the wheel. Still no luck... getting a big puller is next, then
      demolition methods.

      Whilst working on the wheel, the bottom 6" of the rear coil came loose,
      as in about a 1/2 turn of the spring. Apparently the vibrations from my
      pounding on the wheel cracked a weak spot. The rest of the coil remains
      in place but would likely pop out if used as-is.

      I've also stayed away from coil replacements as being too tricky for a
      driveway repair. So I figure I have to find a good suspension shop (ug)
      and get the car towed (bigger ugh). But if it is a custom coil and not a
      stock Geo part then it is a real headache. ???.

      = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
      NOTE: Mail sent to the "NO_REPLY" address will *not* reach me.
      To send me a private message, please follow the directions here:
      http://www.coate org/contact_ jim/
      = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

      [Non-text portions of this message have been removed]

      [Non-text portions of this message have been removed]





      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.