Loading ...
Sorry, an error occurred while loading the content.

4790Re: [solectria_ev] AMC320 repair

Expand Messages
  • Arthur Marquardt
    Dec 9, 2008
    • 0 Attachment
      Wolf:
      I would be interested in a board with everything on it.
      Art




      ________________________________
      From: Bill or Dorothy Swann <dbswann4@...>
      To: solectria_ev@yahoogroups.com
      Sent: Monday, December 8, 2008 9:51:06 PM
      Subject: Re: [solectria_ev] AMC320 repair


      I would be interested in a circuit board / populated. Is there an estimate of the kit cost?
      Thanks, Bill S

      ____________ _________ _________ __
      From: Wolf <wolf@wolftronix. com>
      To: solectria_ev@ yahoogroups. com
      Sent: Monday, December 8, 2008 6:10:04 PM
      Subject: Re: [solectria_ev] AMC320 repair

      This is the schematic for the cable:
      http://www.wolftron ix.com/amc320/ amc_i_cable. jpg

      I use an old compaq laptop that still works and has a serial port on it,
      it runs windows 98SE.

      I could do a layout a circuit board for the adapter... but the cost at the
      board house I use are:

      $33.00 each, with a min order of 4 boards.

      Or

      $33.00 for a panel (panel = as many boards as you can fit into 60sq
      inches) + $50.00, with min order of 4 panels.

      So its MUCH cheaper to just bread board your own, or just solder the parts
      to a protoboard.

      Unless a bunch of people want them. :)

      Wolf
      *wags his tail*
      www.wolftornix. com

      > Wolf:
      > I will try to look at my 320. In the mean time do you have part numbers
      > for the convertor that you are building? I would like to build one as
      > well. Also when you reprogrammed did you need to have a particular version
      > of DOS that you used and what operating system were you using?
      > Art
      >
      >
      >
      >
      > ____________ _________ _________ __
      > From: Wolf <wolf@wolftronix. com>
      > To: solectria_ev@ yahoogroups. com
      > Sent: Monday, December 1, 2008 7:31:05 PM
      > Subject: [solectria_ev] AMC320 repair
      >
      >
      >
      > I have recieved a non-working AMC320 motor controller for repair...
      >
      > I did not have that much time to look at it over the weekend, (due to the
      > holiday), So I just took off the covers and did a visual inspection of all
      > the parts and checked the fuses...
      >
      > The one thing that looks a bit odd is that the microcontroller seems to be
      > missing its firmware... I would expect these two sockets to be populated
      > with a "Hi" and "Lo" EPROMs...
      >
      > http://www.wolftron ix.com/amc320/ images/PB300070. jpg
      >
      > My E-10 is powered by two AMC320s and I have not opened up one of my
      > controllers (well, not that part anyway), to look if these sockets are
      > populated in mine.
      >
      > My AMC320 controllers are probably 2 years later in design, they have a
      > one peice cover, which looks to be more difficult to get into.
      >
      > I will open one of mine up this weekend to check it out... but in the mean
      > time, has anyone had there controller opened up? Did it have these sockets
      > populated? I would expect two windowed ceramic EPROMs, or two plastic
      > PROMs.
      >
      > I also can't seem to find my RS485 to RS232 converter, so I will have to
      > make another one...
      >
      > Thanks for any help.
      >
      > Oh, all the pics taken thus far are here:
      > http://www.wolftron ix.com/amc320
      >
      > Its kind of scary when you look at the high power section... all the
      > current for each leg of the 3 phase drive flows thru only 8 tiny MOSFET
      > pins... http://www.wolftron ix.com/amc320/ images/PB290067. jpg
      >
      > Wolf
      > *wags his tail*
      > www.wolftronix. com
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >

      [Non-text portions of this message have been removed]



      [Non-text portions of this message have been removed]
    • Show all 27 messages in this topic