Loading ...
Sorry, an error occurred while loading the content.

Failed to plumb IPv4 interface(s): nge0

Expand Messages
  • riam budhi
    Dear All, I have Server Netra X4200 appears two error message like this : SunOS Release 5.10 Version Generic_118855-33 64-bit Copyright 1983-2006 Sun
    Message 1 of 14 , Sep 1, 2007
    • 0 Attachment
      Dear All,

      I have Server Netra X4200 appears two error message like this :

      SunOS Release 5.10 Version Generic_118855-33 64-bit
      Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
      Use is subject to license terms.

      1. WARNING: BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm) processor
      erratum 131 was not detected; updating your system's BIOS to a version
      containing this microcode patch is HIGHLY recommended or erroneous system
      operation may occur.

      2. Failed to plumb IPv4 interface(s): nge0

      Hostname: nmsa
      checking ufs filesystems
      /dev/md/rdsk/d35: is logging.
      /dev/md/rdsk/d34: is logging.

      Anybody can help me....???


      Wassalam

      Wisnu


      [Non-text portions of this message have been removed]
    • Rob Trangmar
      For 2., as root on the command line, try: ifconfig nge0 plumb up and see if that works. (Also make sure that /etc/hostname.nge0 has a zero and not an o )
      Message 2 of 14 , Sep 1, 2007
      • 0 Attachment
        For 2., as root on the command line, try: ifconfig nge0 plumb up
        and see if that works.
        (Also make sure that /etc/hostname.nge0 has a zero and not an 'o')

        For 1. Earlier googling revealed this error wasn't as significant as it would seem. In fact, we have several v40z's that have this error and have been runing fine for ~2 years now.
        I'll defer to someone elses better info on that, though..

        RobT




        riam budhi <riamwisnu@...> wrote: Dear All,

        I have Server Netra X4200 appears two error message like this :

        SunOS Release 5.10 Version Generic_118855-33 64-bit
        Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
        Use is subject to license terms.

        1. WARNING: BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm) processor
        erratum 131 was not detected; updating your system's BIOS to a version
        containing this microcode patch is HIGHLY recommended or erroneous system
        operation may occur.

        2. Failed to plumb IPv4 interface(s): nge0

        Hostname: nmsa
        checking ufs filesystems
        /dev/md/rdsk/d35: is logging.
        /dev/md/rdsk/d34: is logging.

        Anybody can help me....???

        Wassalam

        Wisnu

        [Non-text portions of this message have been removed]






        Rob Trangmar

        ---------------------------------
        Pinpoint customers who are looking for what you sell.

        [Non-text portions of this message have been removed]
      • riam budhi
        Thanks Mr Rob, I try with your command, but this is the result : root@nmsa # ifconfig nge0 plumb up ifconfig: plumb: nge0: Invalid argument So...not works.
        Message 3 of 14 , Sep 1, 2007
        • 0 Attachment
          Thanks Mr Rob,

          I try with your command, but this is the result :

          root@nmsa # ifconfig nge0 plumb up
          ifconfig: plumb: nge0: Invalid argument

          So...not works.
          Anybody help me please...??


          wassalam

          Wisnu



          On 9/1/07, Rob Trangmar <robtrang@...> wrote:
          >
          > For 2., as root on the command line, try: ifconfig nge0 plumb up
          > and see if that works.
          > (Also make sure that /etc/hostname.nge0 has a zero and not an 'o')
          >
          > For 1. Earlier googling revealed this error wasn't as significant as it
          > would seem. In fact, we have several v40z's that have this error and have
          > been runing fine for ~2 years now.
          > I'll defer to someone elses better info on that, though..
          >
          > RobT
          >
          > riam budhi <riamwisnu@... <riamwisnu%40gmail.com>> wrote: Dear All,
          >
          >
          > I have Server Netra X4200 appears two error message like this :
          >
          > SunOS Release 5.10 Version Generic_118855-33 64-bit
          > Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
          > Use is subject to license terms.
          >
          > 1. WARNING: BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm)
          > processor
          > erratum 131 was not detected; updating your system's BIOS to a version
          > containing this microcode patch is HIGHLY recommended or erroneous system
          > operation may occur.
          >
          > 2. Failed to plumb IPv4 interface(s): nge0
          >
          > Hostname: nmsa
          > checking ufs filesystems
          > /dev/md/rdsk/d35: is logging.
          > /dev/md/rdsk/d34: is logging.
          >
          > Anybody can help me....???
          >
          > Wassalam
          >
          > Wisnu
          >
          > [Non-text portions of this message have been removed]
          >
          >
          >
          >
          >
          > Rob Trangmar
          >
          > ---------------------------------
          > Pinpoint customers who are looking for what you sell.
          >
          > [Non-text portions of this message have been removed]
          >
          >
          >


          [Non-text portions of this message have been removed]
        • Gérard Henry
          ... it seems that nge driver isn t loaded, is it? ultra20-root% modinfo | grep nge 126 fffffffff4333000 ad40 179 1 nge (nVidia 1Gb Ethernet 1.5) Did it
          Message 4 of 14 , Sep 3, 2007
          • 0 Attachment
            riam budhi wrote:
            > Thanks Mr Rob,
            >
            > I try with your command, but this is the result :
            >
            > root@nmsa # ifconfig nge0 plumb up
            > ifconfig: plumb: nge0: Invalid argument
            >
            > So...not works.
            > Anybody help me please...??
            >

            it seems that nge driver isn't loaded, is it?
            ultra20-root% modinfo | grep nge
            126 fffffffff4333000 ad40 179 1 nge (nVidia 1Gb Ethernet 1.5)

            Did it already worked, or is it a fresh install?

            gerard
          • riam budhi
            Thanks assalamualikum Mr Gerard, Right now I am talking about Solaris 10, so at Solaris 10 do not need installs interface driver for nge0 because plug-play.
            Message 5 of 14 , Sep 3, 2007
            • 0 Attachment
              Thanks

              assalamualikum
              Mr Gerard,


              Right now I am talking about Solaris 10, so at Solaris 10 do not need
              installs interface driver for nge0 because plug-play. When I scratch this
              machine, I choose nge0 and nge1 but when installation machine is finished
              nge0 was error. Failed to plumb nge0.

              So...anybody can help me...??

              wassalam

              wisenu

              On 9/3/07, Gérard Henry <ghenry@...-mrs.fr> wrote:
              >
              > riam budhi wrote:
              > > Thanks Mr Rob,
              > >
              > > I try with your command, but this is the result :
              > >
              > > root@nmsa # ifconfig nge0 plumb up
              > > ifconfig: plumb: nge0: Invalid argument
              > >
              > > So...not works.
              > > Anybody help me please...??
              > >
              >
              > it seems that nge driver isn't loaded, is it?
              > ultra20-root% modinfo | grep nge
              > 126 fffffffff4333000 ad40 179 1 nge (nVidia 1Gb Ethernet 1.5)
              >
              > Did it already worked, or is it a fresh install?
              >
              > gerard
              >
              >


              [Non-text portions of this message have been removed]
            • Gérard Henry
              ... i think that somebody could help you if you give more informations! ifconfig -a? did you really do: root@nmsa # ifconfig nge0 plumb up ifconfig: plumb:
              Message 6 of 14 , Sep 3, 2007
              • 0 Attachment
                riam budhi wrote:
                > Thanks
                >
                > assalamualikum
                > Mr Gerard,
                >
                >
                > Right now I am talking about Solaris 10, so at Solaris 10 do not need
                > installs interface driver for nge0 because plug-play. When I scratch this
                > machine, I choose nge0 and nge1 but when installation machine is finished
                > nge0 was error. Failed to plumb nge0.
                >
                > So...anybody can help me...??
                >
                i think that somebody could help you if you give more informations!
                ifconfig -a?
                did you really do:
                root@nmsa # ifconfig nge0 plumb up
                ifconfig: plumb: nge0: Invalid argument
                it is:
                root@nmsa # ifconfig nge0 plumb
                Is scanpci showing your card?
                Do you show something related to nvidia in /var/adm/messages?
                Have you tried: ifconfig nge1 plumb?
              • riam budhi
                ok mr gerard more /var/adm/message command : Sep 3 15:00:29 nmsa mpt0 Firmware version v1.10.0.0 (IR) Sep 3 15:00:29 nmsa scsi: [ID 365881 kern.info]
                Message 7 of 14 , Sep 3, 2007
                • 0 Attachment
                  ok
                  mr gerard

                  more /var/adm/message command :

                  Sep 3 15:00:29 nmsa mpt0 Firmware version v1.10.0.0 (IR)
                  Sep 3 15:00:29 nmsa scsi: [ID 365881 kern.info] /pci@79,0/pci1022,7458@11
                  /pci1000,3060@2 (mpt0):
                  Sep 3 15:00:29 nmsa mpt0: IOC Operational.
                  Sep 3 15:00:39 nmsa pci_pci: [ID 370704 kern.info] PCI-device: pci1000,
                  3060@2, mpt0
                  Sep 3 15:00:39 nmsa genunix: [ID 936769 kern.info] mpt0 is
                  /pci@79,0/pci1022,7458@11/pci1000,3060@2
                  Sep 3 15:00:39 nmsa scsi: [ID 193665 kern.info] sd3 at mpt0: target 0 lun 0
                  Sep 3 15:00:39 nmsa genunix: [ID 936769 kern.info] sd3 is
                  /pci@79,0/pci1022,7458@11/pci1000,3060@2/sd@0,0
                  Sep 3 15:00:39 nmsa scsi: [ID 193665 kern.info] sd4 at mpt0: target 1 lun 0
                  Sep 3 15:00:39 nmsa genunix: [ID 936769 kern.info] sd4 is
                  /pci@79,0/pci1022,7458@11/pci1000,3060@2/sd@1,0
                  Sep 3 15:00:40 nmsa unix: [ID 190185 kern.info] SMBIOS v2.3 loaded (2679
                  bytes)Sep 3 15:00:40 nmsa pseudo: [ID 129642 kern.info] pseudo-device: dld0
                  Sep 3 15:00:40 nmsa genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
                  Sep 3 15:00:40 nmsa rootnex: [ID 349649 kern.info] npe0 at root: space 0
                  offset 0
                  Sep 3 15:00:40 nmsa genunix: [ID 936769 kern.info] npe0 is /pci@0,0
                  Sep 3 15:00:40 nmsa npe: [ID 236367 kern.info] PCI Express-device: pci10de,
                  5c@9, pci_pci0
                  Sep 3 15:00:40 nmsa genunix: [ID 936769 kern.info] pci_pci0 is
                  /pci@0,0/pci10de,5c@9
                  Sep 3 15:00:40 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy)
                  instance 0 vector 0x4 ioapic 0x4 intin 0x4 is bound to cpu 3
                  Sep 3 15:00:40 nmsa isa: [ID 202937 kern.info] ISA-device: asy0
                  Sep 3 15:00:40 nmsa genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
                  Sep 3 15:00:40 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp:
                  pciclass,0c0320 (ehci) instance 0 vector 0x16 ioapic 0x4 intin 0x16 is bound
                  to cpu 0
                  @2,1, ehci0
                  Sep 3 15:00:42 nmsa genunix: [ID 936769 kern.info] ehci0 is
                  /pci@0,0/pci108e,cb84@2,1
                  Sep 3 15:00:43 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp:
                  pciclass,0c0310 (ohci) instance 0 vector 0x15 ioapic 0x4 intin 0x15 is bound
                  to cpu 1
                  Sep 3 15:00:44 nmsa npe: [ID 236367 kern.info] PCI Express-device: pci108e,
                  cb84@2, ohci0
                  Sep 3 15:00:44 nmsa genunix: [ID 936769 kern.info] ohci0 is
                  /pci@0,0/pci108e,cb84@2
                  Sep 3 15:00:44 nmsa unix: [ID 950921 kern.info] cpu0: x86 (chipid 0x0
                  AuthenticAMD family 15 model 65 step 3 clock 2200 MHz)
                  Sep 3 15:00:44 nmsa unix: [ID 950921 kern.info] cpu0: Dual-Core AMD
                  Opteron(tm) Processor 2214 HE
                  Sep 3 15:00:44 nmsa unix: [ID 950921 kern.info] cpu1: x86 (chipid 0x0
                  AuthenticAMD family 15 model 65 step 3 clock 2200 MHz)
                  Sep 3 15:00:44 nmsa unix: [ID 950921 kern.info] cpu1: Dual-Core AMD
                  Opteron(tm) Processor 2214 HE
                  Sep 3 15:00:46 nmsa unix: [ID 557827 kern.info] cpu1 initialization
                  complete - online
                  Sep 3 15:00:46 nmsa unix: [ID 950921 kern.info] cpu2: x86 (chipid 0x1
                  AuthenticAMD family 15 model 65 step 3 clock 2200 MHz)
                  Sep 3 15:00:46 nmsa unix: [ID 950921 kern.info] cpu2: Dual-Core AMD
                  Opteron(tm) Processor 2214 HE
                  Sep 3 15:00:48 nmsa unix: [ID 557827 kern.info] cpu2 initialization
                  complete - online
                  Sep 3 15:00:48 nmsa unix: [ID 950921 kern.info] cpu3: x86 (chipid 0x1
                  AuthenticAMD family 15 model 65 step 3 clock 2200 MHz)
                  Sep 3 15:00:48 nmsa unix: [ID 950921 kern.info] cpu3: Dual-Core AMD
                  Opteron(tm) Processor 2214 HE
                  Sep 3 15:00:48 nmsa usba: [ID 912658 kern.info] USB 1.10 device
                  (usb46b,ff10) operating at full speed (USB 1.x) on USB 1.10 root hub:
                  device@3, usb_mid0 at bus address 2
                  Sep 3 15:00:48 nmsa usba: [ID 349649 kern.info] American Megatrends
                  Inc. Virtual Keyboard and Mouse
                  Sep 3 15:00:48 nmsa genunix: [ID 936769 kern.info] usb_mid0 is
                  /pci@0,0/pci108e,cb84@2/device@3
                  Sep 3 15:00:48 nmsa genunix: [ID 408114 kern.info]
                  /pci@0,0/pci108e,cb84@2/device@3
                  (usb_mid0) online
                  Sep 3 15:00:48 nmsa usba: [ID 912658 kern.info] USB 1.10 device
                  (usb46b,ff20) operating at full speed (USB 1.x) on USB 1.10 root hub:
                  storage@4, scsa2usb0 at bus address 3
                  Sep 3 15:00:48 nmsa usba: [ID 349649 kern.info] American Megatrends
                  Inc. Virtual Cdrom Device
                  Sep 3 15:00:48 nmsa genunix: [ID 936769 kern.info] scsa2usb0 is
                  /pci@0,0/pci108e,cb84@2/storage@4
                  Sep 3 15:00:48 nmsa genunix: [ID 408114 kern.info]
                  /pci@0,0/pci108e,cb84@2/storage@4
                  (scsa2usb0) online
                  Sep 3 15:00:48 nmsa usba: [ID 912658 kern.info] USB 1.10 device
                  (usb46b,ff40) operating at full speed (USB 1.x) on USB 1.10 root hub:
                  storage@5, scsa2usb1 at bus address 4
                  Sep 3 15:00:48 nmsa usba: [ID 349649 kern.info] American Megatrends
                  Inc. Virtual Floppy Device
                  Sep 3 15:00:48 nmsa genunix: [ID 936769 kern.info] scsa2usb1 is
                  /pci@0,0/pci108e,cb84@2/storage@5
                  Sep 3 15:00:48 nmsa genunix: [ID 408114 kern.info]
                  /pci@0,0/pci108e,cb84@2/storage@5
                  (scsa2usb1) online
                  Sep 3 15:00:48 nmsa usba: [ID 912658 kern.info] USB 1.10 interface
                  (usbif46b,ff10.config1.0) operating at full speed (USB 1.x) on USB 1.10 root
                  hub: keyboard@0, hid0 at bus address 2
                  Sep 3 15:00:48 nmsa usba: [ID 349649 kern.info] American Megatrends
                  Inc. Virtual Keyboard and Mouse
                  Sep 3 15:00:48 nmsa genunix: [ID 936769 kern.info] hid0 is
                  /pci@0,0/pci108e,cb84@2/device@3/keyboard@0
                  ce@3/keyboard@0 (hid0) online [ID 408114 kern.info] /pci@0,0/pci108e,cb84@2
                  /devi--More--(88%)
                  Sep 3 15:00:48 nmsa usba: [ID 912658 kern.info] USB 1.10 interface
                  (usbif46b,ff10.config1.1) operating at full speed (USB 1.x) on USB 1.10 root
                  hub: mouse@1, hid1 at bus address 2
                  Sep 3 15:00:48 nmsa usba: [ID 349649 kern.info] American Megatrends
                  Inc. Virtual Keyboard and Mouse
                  Sep 3 15:00:48 nmsa genunix: [ID 936769 kern.info] hid1 is
                  /pci@0,0/pci108e,cb84@2/device@3/mouse@1
                  Sep 3 15:00:48 nmsa genunix: [ID 408114 kern.info] /pci@0,0/pci108e,cb84@2
                  /device@3/mouse@1 (hid1) online
                  Sep 3 15:00:48 nmsa scsi: [ID 193665 kern.info] sd1 at scsa2usb1: target 0
                  lun 0
                  Sep 3 15:00:48 nmsa genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci108e,
                  cb84@2/storage@5/disk@0,0
                  Sep 3 15:00:48 nmsa genunix: [ID 408114 kern.info] /pci@0,0/pci108e,cb84@2
                  /storage@5/disk@0,0 (sd1) online
                  Sep 3 15:00:50 nmsa unix: [ID 557827 kern.info] cpu3 initialization
                  complete - online
                  Sep 3 15:00:50 nmsa unix: [ID 999285 kern.warning] WARNING: BIOS microcode
                  patch for AMD Athlon(tm) 64/Opteron(tm) processor
                  Sep 3 15:00:50 nmsa erratum 131 was not detected; updating your system's
                  BIOS to a version
                  Sep 3 15:00:50 nmsa containing this microcode patch is HIGHLY recommended
                  or erroneous system
                  Sep 3 15:00:50 nmsa operation may occur.
                  Sep 3 15:00:50 nmsa scsi: [ID 193665 kern.info] sd0 at scsa2usb0: target 0
                  lun 0
                  Sep 3 15:00:50 nmsa genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci108e,
                  cb84@2/storage@4/disk@0,0
                  Sep 3 15:00:52 nmsa genunix: [ID 408114 kern.info] /pci@0,0/pci108e,cb84@2
                  /storage@4/disk@0,0 (sd0) online
                  instance 0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 2 pci10de,57
                  (nge) --More--(89%)
                  Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 15:00:52 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: pci10de,57
                  (nge) instance 0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 3
                  Sep 3 15:00:52 nmsa rootnex: [ID 349649 kern.info] iscsi0 at root
                  Sep 3 15:00:52 nmsa genunix: [ID 936769 kern.info] iscsi0 is /iscsi
                  Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 15:00:52 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: pci10de,57
                  (nge) instance 1 vector 0x2f ioapic 0x5 intin 0x17 is bound to cpu 0
                  Sep 3 15:00:52 nmsa mac: [ID 543131 kern.info] NOTICE: nge1/0 registered
                  Sep 3 15:00:53 nmsa npe: [ID 236367 kern.info] PCI Express-device: pci10de,
                  5d@d, pcie_pci2
                  Sep 3 15:00:53 nmsa genunix: [ID 936769 kern.info] pcie_pci2 is
                  /pci@0,0/pci10de,5d@d
                  Sep 3 15:00:53 nmsa pcie_pci: [ID 586369 kern.info] PCIE-device: pci8086,
                  340@0, pcie_pci4
                  Sep 3 15:00:53 nmsa genunix: [ID 936769 kern.info] pcie_pci4 is
                  /pci@0,0/pci10de,5d@d/pci8086,340@0
                  Sep 3 15:00:53 nmsa pcie_pci: [ID 586369 kern.info] PCIE-device: pci8086,
                  341@0,2, pcie_pci5
                  Sep 3 15:00:53 nmsa genunix: [ID 936769 kern.info] pcie_pci5 is
                  /pci@0,0/pci10de,5d@d/pci8086,341@0,2
                  Sep 3 15:00:53 nmsa npe: [ID 236367 kern.info] PCI Express-device: pci10de,
                  5d@d, pcie_pci8
                  Sep 3 15:00:53 nmsa genunix: [ID 936769 kern.info] pcie_pci8 is
                  /pci@79,0/pci10de,5d@d
                  Sep 3 15:00:53 nmsa pcie_pci: [ID 586369 kern.info] PCIE-device: pci8086,
                  340@0, pcie_pci10
                  Sep 3 15:00:53 nmsa genunix: [ID 936769 kern.info] pcie_pci10 is
                  /pci@79,0/pci10de,5d@d/pci8086,340@0
                  Sep 3 15:00:53 nmsa pcie_pci: [ID 586369 kern.info] PCIE-device: pci8086,
                  341@0,2, pcie_pci11
                  Sep 3 15:00:53 nmsa genunix: [ID 936769 kern.info] pcie_pci11 is
                  /pci@79,0/pci10de,5d@d/pci8086,341@0,2
                  Sep 3 15:00:53 nmsa nge: [ID 223987 kern.info] NOTICE: nge1: link down
                  (initialised)
                  Sep 3 15:00:55 nmsa nge: [ID 223987 kern.info] NOTICE: nge1: link up
                  100Mbps half-Duplex (initialised)
                  Sep 3 15:00:56 nmsa genunix: [ID 454863 kern.info] dump on /dev/md/dsk/d31
                  size 4000 MB
                  Sep 3 15:00:57 nmsa pseudo: [ID 129642 kern.info] pseudo-device: zfs0
                  Sep 3 15:00:57 nmsa genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
                  Sep 3 15:00:57 nmsa pseudo: [ID 129642 kern.info] pseudo-device: pm0
                  Sep 3 15:00:57 nmsa genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
                  Sep 3 15:00:57 nmsa pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
                  Sep 3 15:00:57 nmsa genunix: [ID 936769 kern.info] devinfo0 is
                  /pseudo/devinfo@0
                  Sep 3 15:00:57 nmsa pseudo: [ID 129642 kern.info] pseudo-device: power0
                  Sep 3 15:00:57 nmsa genunix: [ID 936769 kern.info] power0 is
                  /pseudo/power@0
                  Sep 3 15:00:59 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata)
                  instance 0 vector 0xe ioapic 0x4 intin 0xe is bound to cpu 1
                  Sep 3 15:00:59 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata)
                  instance 0 vector 0xe ioapic 0x4 intin 0xe is bound to cpu 2
                  Sep 3 15:00:59 nmsa genunix: [ID 640982 kern.info] ATAPI device at targ
                  0, lun 0 lastlun 0x0
                  Sep 3 15:00:59 nmsa genunix: [ID 846691 kern.info] model
                  TSSTcorpCD/DVDW TS-T632A
                  Sep 3 15:00:59 nmsa npe: [ID 236367 kern.info] PCI Express-device: ide@0,
                  ata0
                  Sep 3 15:00:59 nmsa genunix: [ID 936769 kern.info] ata0 is /pci@0,
                  0/pci-ide@6/ide@0
                  Sep 3 15:00:59 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:00:59 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:00:59 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:00:59 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:00:59 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:00:59 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:00:59 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:00:59 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:00:59 nmsa scsi: [ID 193665 kern.info] sd2 at ata0: target 0 lun 0
                  Sep 3 15:00:59 nmsa genunix: [ID 936769 kern.info] sd2 is /pci@0,
                  0/pci-ide@6/ide@0/sd@0,0
                  Sep 3 15:01:03 nmsa rootnex: [ID 349649 kern.info] xsvc0 at root
                  Sep 3 15:01:03 nmsa genunix: [ID 936769 kern.info] xsvc0 is /xsvc
                  Sep 3 15:01:03 nmsa ntpdate[247]: [ID 831711 daemon.error] no server
                  suitable for synchronization found
                  Sep 3 15:01:03 nmsa xntpd[389]: [ID 702911 daemon.notice] xntpd
                  3-5.93e+sun03/08/29 16:23:05 (
                  1.4)
                  Sep 3 15:01:03 nmsa genunix: [ID 454863 kern.info] dump on
                  /dev/dsk/c3t0d0s1 size 4000 MB
                  Sep 3 15:01:03 nmsa xntpd[389]: [ID 301315 daemon.notice] tickadj = 5, tick
                  = 10000, tvu_maxslew = 495, est. hz = 100
                  Sep 3 15:01:03 nmsa xntpd[389]: [ID 266339 daemon.notice] using kernel
                  phase-lock loop 0041, drift correction 0.00000
                  Sep 3 15:01:03 nmsa last message repeated 1 time
                  Sep 3 15:01:03 nmsa pseudo: [ID 129642 kern.info] pseudo-device: vol0
                  Sep 3 15:01:03 nmsa genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
                  Sep 3 15:01:03 nmsa npe: [ID 236367 kern.info] PCI Express-device: pci1022,
                  7458@10, pci_pci1
                  Sep 3 15:01:03 nmsa genunix: [ID 936769 kern.info] pci_pci1 is
                  /pci@79,0/pci1022,7458@10
                  Sep 3 15:01:03 nmsa pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
                  Sep 3 15:01:03 nmsa genunix: [ID 936769 kern.info] pseudo1 is
                  /pseudo/zconsnex@1
                  Sep 3 15:01:03 nmsa pseudo: [ID 129642 kern.info] pseudo-device:
                  ramdisk1024
                  Sep 3 15:01:03 nmsa genunix: [ID 936769 kern.info] ramdisk1024 is
                  /pseudo/ramdisk@1024
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] lockstat0 is
                  /pseudo/lockstat@0
                  Sep 3 15:01:04 nmsa sendmail[392]: [ID 702911 mail.crit] My unqualified
                  host name (nmsa) unknown; sleeping for retry
                  Sep 3 15:01:04 nmsa sendmail[391]: [ID 702911 mail.crit] My unqualified
                  host name (nmsa) unknown; sleeping for retry
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: llc10
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: lofi0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
                  Sep 3 15:01:04 nmsa mac: [ID 543131 kern.info] NOTICE: e1000g0/0 registered
                  Sep 3 15:01:04 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,1011
                  (e1000g) instance 0 vector 0x38 ioapic 0x7 intin 0x0 is bound to cpu 3
                  Sep 3 15:01:04 nmsa e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network
                  Connection, Driver Ver. 5.0.11
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: profile0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] profile0 is
                  /pseudo/profile@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: systrace0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] systrace0 is
                  /pseudo/systrace@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: fbt0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: sdt0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] fasttrap0 is
                  /pseudo/fasttrap@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: bmc0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] bmc0 is /pseudo/bmc@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] fssnap0 is
                  /pseudo/fssnap@0
                  Sep 3 15:01:04 nmsa pseudo: [ID 129642 kern.info] pseudo-device: winlock0
                  Sep 3 15:01:04 nmsa genunix: [ID 936769 kern.info] winlock0 is
                  /pseudo/winlock@0
                  Sep 3 15:01:05 nmsa pseudo: [ID 129642 kern.info] pseudo-device: rsm0
                  Sep 3 15:01:05 nmsa genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
                  Sep 3 15:01:05 nmsa pseudo: [ID 129642 kern.info] pseudo-device: pool0
                  Sep 3 15:01:05 nmsa genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
                  Sep 3 15:01:05 nmsa ipf: [ID 774698 kern.info] IP Filter: v4.0.3, running.
                  Sep 3 15:01:05 nmsa pseudo: [ID 129642 kern.info] pseudo-device: fcp0
                  Sep 3 15:01:05 nmsa genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
                  Sep 3 15:01:05 nmsa pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
                  Sep 3 15:01:05 nmsa genunix: [ID 936769 kern.info] dtrace0 is
                  /pseudo/dtrace@0
                  Sep 3 15:01:05 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci10de,57
                  (nge) instance #0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 0
                  Sep 3 15:01:05 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 15:01:05 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:01:05 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:01:05 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:01:05 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Control with "atapi-cd-dma-enabled" propertyn.info] ATA DMA off:
                  disabled. --More--(96%)
                  Sep 3 15:01:05 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:01:05 nmsa genunix: [ID 935449 kern.info] ATA DMA off:
                  disabled. Control with "atapi-cd-dma-enabled" property
                  Sep 3 15:01:05 nmsa genunix: [ID 882269 kern.info] PIO mode 4 selected
                  Sep 3 15:01:05 nmsa mac: [ID 543131 kern.info] NOTICE: e1000g1/0 registered
                  Sep 3 15:01:05 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci8086,1011
                  (e1000g) instance #1 vector 0x39 ioapic 0x7 intin 0x1 is bound to cpu 3
                  Sep 3 15:01:05 nmsa e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network
                  Connection, Driver Ver. 5.0.11
                  Sep 3 15:01:14 nmsa mac: [ID 846399 kern.info] NOTICE: e1000g0/0
                  unregistered
                  Sep 3 15:01:14 nmsa mac: [ID 846399 kern.info] NOTICE: e1000g1/0
                  unregistered
                  Sep 3 15:01:17 nmsa java[811]: [ID 807473 user.error] pkcs11_softtoken:
                  Keystore version failure.
                  Sep 3 15:01:17 nmsa java[811]: [ID 807473 user.error] pkcs11_softtoken:
                  Keystore version failure.
                  Sep 3 15:02:04 nmsa sendmail[392]: [ID 702911 mail.alert] unable to qualify
                  my own domain name (nmsa) -- using short name
                  Sep 3 15:02:04 nmsa sendmail[391]: [ID 702911 mail.alert] unable to qualify
                  my own domain name (nmsa) -- using short name
                  Sep 3 16:19:12 nmsa rootnex: [ID 349649 kern.info] xsvc0 at root
                  Sep 3 16:19:12 nmsa genunix: [ID 936769 kern.info] xsvc0 is /xsvc
                  Sep 3 16:19:12 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci10de,57
                  (nge) instance #0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 0
                  Sep 3 16:19:12 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 16:19:12 nmsa mac: [ID 543131 kern.info] NOTICE: e1000g0/0 registered
                  Sep 3 16:19:12 nmsa pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,1011
                  (e1000g) instance 0 vector 0x38 ioapic 0x7 intin 0x0 is bound to cpu 0
                  Sep 3 16:19:12 nmsa e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network
                  Connection, Driver Ver. 5.0.11
                  Sep 3 16:19:13 nmsa mac: [ID 543131 kern.info] NOTICE: e1000g1/0 registered
                  Sep 3 16:19:13 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci8086,1011
                  (e1000g) instance #1 vector 0x39 ioapic 0x7 intin 0x1 is bound to cpu 0
                  Sep 3 16:19:13 nmsa e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network
                  Connection, Driver Ver. 5.0.11
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] fssnap0 is
                  /pseudo/fssnap@0
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device:
                  ramdisk1024
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] ramdisk1024 is
                  /pseudo/ramdisk@1024
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device: winlock0
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] winlock0 is
                  /pseudo/winlock@0
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device: lofi0
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device: bmc0
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] bmc0 is /pseudo/bmc@0
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device: pm0
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
                  Sep 3 16:19:13 nmsa pseudo: [ID 129642 kern.info] pseudo-device: rsm0
                  Sep 3 16:19:13 nmsa genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
                  Sep 3 16:19:14 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci10de,57
                  (nge) instance #0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 0
                  Sep 3 16:19:14 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 16:19:14 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci10de,57
                  (nge) instance #0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 0
                  Sep 3 16:19:14 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 16:19:14 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci10de,57
                  (nge) instance #0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 0
                  Sep 3 16:19:14 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 16:46:18 nmsa pcplusmp: [ID 398438 kern.info] pcplusmp: pci10de,57
                  (nge) instance #0 vector 0x14 ioapic 0x4 intin 0x14 is bound to cpu 0
                  Sep 3 16:46:18 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                  nge_attach: nge_chip_reset() failed
                  Sep 3 17:52:42 nmsa pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
                  Sep 3 17:52:42 nmsa genunix: [ID 936769 kern.info] devinfo0 is
                  /pseudo/devinfo@0
                  [root@nmsa 17:59:10 /]#

                  [root@nmsa 18:14:40 /]# modinfo | grep nge
                  116 ffffffffeff31000 ad40 188 1 nge (nVidia 1Gb Ethernet 1.5)


                  [root@nmsa 18:15:10 /]# ifconfig -a
                  lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
                  index 1
                  inet 127.0.0.1 netmask ff000000
                  lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
                  index 1
                  inet 10.145.182.225 netmask ffffff00
                  nge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
                  inet 10.145.182.209 netmask fffffff0 broadcast 10.145.182.223
                  ether 0:14:4f:7d:81:f7
                  [root@nmsa 18:15:43 /]#


                  So...what u need another thing...mr gerard..?? I really glad to helped.

                  Thanks

                  Wassalam
                  Wisenu


                  On 9/3/07, Gérard Henry <ghenry@...-mrs.fr> wrote:
                  >
                  > riam budhi wrote:
                  > > Thanks
                  > >
                  > > assalamualikum
                  > > Mr Gerard,
                  > >
                  > >
                  > > Right now I am talking about Solaris 10, so at Solaris 10 do not need
                  > > installs interface driver for nge0 because plug-play. When I scratch
                  > this
                  > > machine, I choose nge0 and nge1 but when installation machine is
                  > finished
                  > > nge0 was error. Failed to plumb nge0.
                  > >
                  > > So...anybody can help me...??
                  > >
                  > i think that somebody could help you if you give more informations!
                  > ifconfig -a?
                  > did you really do:
                  > root@nmsa # ifconfig nge0 plumb up
                  > ifconfig: plumb: nge0: Invalid argument
                  > it is:
                  > root@nmsa # ifconfig nge0 plumb
                  > Is scanpci showing your card?
                  > Do you show something related to nvidia in /var/adm/messages?
                  > Have you tried: ifconfig nge1 plumb?
                  >
                  >


                  [Non-text portions of this message have been removed]
                • Juergen Keil
                  ... I guess this warning message might explain why nge0 fails to plumb. Could be this bug: Bug ID: 6531267 Synopsis: nge port hang while running multiple TCP
                  Message 8 of 14 , Sep 3, 2007
                  • 0 Attachment
                    --- In solarisx86@yahoogroups.com, "riam budhi" <riamwisnu@...> wrote:

                    > more /var/adm/message command :
                    > ...
                    > Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                    > nge_attach: nge_chip_reset() failed

                    I guess this warning message might explain why nge0 fails to plumb.

                    Could be this bug:
                    Bug ID: 6531267
                    Synopsis: nge port hang while running multiple TCP connections testing
                    on x6200 blade
                    http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6531267
                  • riam budhi
                    assalamualikum, mr juergen, thanks for your information....I ll check this bug wassalam wisenu ... [Non-text portions of this message have been removed]
                    Message 9 of 14 , Sep 3, 2007
                    • 0 Attachment
                      assalamualikum,

                      mr juergen,

                      thanks for your information....I'll check this bug

                      wassalam

                      wisenu

                      On 9/3/07, Juergen Keil <jk@...> wrote:
                      >
                      > --- In solarisx86@yahoogroups.com <solarisx86%40yahoogroups.com>, "riam
                      > budhi" <riamwisnu@...> wrote:
                      >
                      > > more /var/adm/message command :
                      > > ...
                      > > Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                      > > nge_attach: nge_chip_reset() failed
                      >
                      > I guess this warning message might explain why nge0 fails to plumb.
                      >
                      > Could be this bug:
                      > Bug ID: 6531267
                      > Synopsis: nge port hang while running multiple TCP connections testing
                      > on x6200 blade
                      > http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6531267
                      >
                      >
                      >


                      [Non-text portions of this message have been removed]
                    • riam budhi
                      Assalamualikum Mr Juergen, I have checked this bug, but I still confuse How to fix this problem...?? Because I look for at sunsolve.sun.com no document to fix
                      Message 10 of 14 , Sep 4, 2007
                      • 0 Attachment
                        Assalamualikum Mr Juergen,

                        I have checked this bug, but I still confuse How to fix this problem...??
                        Because I look for at sunsolve.sun.com no document to fix this bug.

                        Please help me mr juergen..

                        Wassalam

                        wisenu

                        On 9/3/07, Juergen Keil <jk@...> wrote:
                        >
                        > --- In solarisx86@yahoogroups.com <solarisx86%40yahoogroups.com>, "riam
                        > budhi" <riamwisnu@...> wrote:
                        >
                        > > more /var/adm/message command :
                        > > ...
                        > > Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                        > > nge_attach: nge_chip_reset() failed
                        >
                        > I guess this warning message might explain why nge0 fails to plumb.
                        >
                        > Could be this bug:
                        > Bug ID: 6531267
                        > Synopsis: nge port hang while running multiple TCP connections testing
                        > on x6200 blade
                        > http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6531267
                        >
                        >
                        >


                        [Non-text portions of this message have been removed]
                      • Juergen Keil
                        ... problem...?? Sorry, can t help here. Bug 6531267 documents a similar - maybe the same - problem. The public text of the bug doesn t reveal any
                        Message 11 of 14 , Sep 4, 2007
                        • 0 Attachment
                          --- In solarisx86@yahoogroups.com, "riam budhi" <riamwisnu@...> wrote:
                          >
                          > Assalamualikum Mr Juergen,
                          >
                          > I have checked this bug, but I still confuse How to fix this
                          problem...??

                          Sorry, can't help here. Bug 6531267 documents a similar - maybe
                          the same - problem. The public text of the bug doesn't reveal
                          any workarounds. Apparently the bug is not yet fixed
                          (not in opensolaris, not in Solaris 10).

                          Source code for the nge driver isn't available, so it's unclear
                          what kind of failure we'll see when the function "nge_chip_reset()"
                          fails. (it wouln't surprise me if nge_chip_reset() is called from
                          the nge driver's attach(9e) entry point, and the attach function
                          might return a failure when nge_chip_reset() fails).
                        • Mike Riley
                          ... I seriously doubt this bug is your problem. The bug he mentions is only caused using a test program called NICDRV which has multiple TCP connections going
                          Message 12 of 14 , Sep 4, 2007
                          • 0 Attachment
                            riam budhi wrote:
                            > Assalamualikum Mr Juergen,
                            >
                            > I have checked this bug, but I still confuse How to fix this problem...??
                            > Because I look for at sunsolve.sun.com no document to fix this bug.
                            >
                            > Please help me mr juergen..
                            >
                            > Wassalam
                            >
                            > wisenu
                            >
                            > On 9/3/07, Juergen Keil <jk@...> wrote:
                            >> --- In solarisx86@yahoogroups.com <solarisx86%40yahoogroups.com>, "riam
                            >> budhi" <riamwisnu@...> wrote:
                            >>
                            >>> more /var/adm/message command :
                            >>> ...
                            >>> Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                            >>> nge_attach: nge_chip_reset() failed
                            >> I guess this warning message might explain why nge0 fails to plumb.
                            >>
                            >> Could be this bug:
                            >> Bug ID: 6531267
                            >> Synopsis: nge port hang while running multiple TCP connections testing
                            >> on x6200 blade
                            >> http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6531267

                            I seriously doubt this bug is your problem. The bug he mentions is only caused
                            using a test program called NICDRV which has multiple TCP connections going at
                            once through the interface. Your problem is that you say it is not being plumbed.

                            I did a query and I find no bug with your error message logged. Can you provide
                            info on the system type and the output from /usr/X11/bin/scanpci -v (just
                            include the part relevant to the bge devices)?

                            Mike
                          • Juergen Keil
                            ... problem...?? ... , riam ... testing ... only caused ... connections going at ... being plumbed. Hmm, but isn t that exactly
                            Message 13 of 14 , Sep 4, 2007
                            • 0 Attachment
                              --- In solarisx86@yahoogroups.com, Mike Riley <michael.riley@...> wrote:
                              >
                              > riam budhi wrote:
                              > > Assalamualikum Mr Juergen,
                              > >
                              > > I have checked this bug, but I still confuse How to fix this
                              problem...??
                              > > Because I look for at sunsolve.sun.com no document to fix this bug.
                              > >
                              > > Please help me mr juergen..
                              > >
                              > > Wassalam
                              > >
                              > > wisenu
                              > >
                              > > On 9/3/07, Juergen Keil <jk@...> wrote:
                              > >> --- In solarisx86@yahoogroups.com
                              <solarisx86%40yahoogroups.com>, "riam
                              > >> budhi" <riamwisnu@> wrote:
                              > >>
                              > >>> more /var/adm/message command :
                              > >>> ...
                              > >>> Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                              > >>> nge_attach: nge_chip_reset() failed
                              > >> I guess this warning message might explain why nge0 fails to plumb.
                              > >>
                              > >> Could be this bug:
                              > >> Bug ID: 6531267
                              > >> Synopsis: nge port hang while running multiple TCP connections
                              testing
                              > >> on x6200 blade
                              > >> http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6531267
                              >
                              > I seriously doubt this bug is your problem. The bug he mentions is
                              only caused
                              > using a test program called NICDRV which has multiple TCP
                              connections going at
                              > once through the interface. Your problem is that you say it is not
                              being plumbed.

                              Hmm, but isn't that exactly what is written in 6531267's
                              description text?

                              From 6531267's description:

                              "While system booting, nge1 interface failed to attach,..."

                              "Mar 6 04:14:35 groweth nge: [ID 801725 kern.warning] WARNING:
                              nge1: nge_attach: nge_chip_reset() failed"

                              "...And we found nge1 was not plumbed due to this reason:"



                              "riam budhi" <riamwisnu@...> isn't running that test program
                              called NICDRV, but the way the nge0 nic fails to plumb at boot time
                              looks similar to the failure for nge1 from 6531267.
                            • Mike Riley
                              ... Hmmm. I was looking at the Synopsis and the Comments section (which you can t see externally). Here is the start of that: Before the system reboot, we
                              Message 14 of 14 , Sep 4, 2007
                              • 0 Attachment
                                Juergen Keil wrote:
                                > --- In solarisx86@yahoogroups.com, Mike Riley <michael.riley@...> wrote:
                                >> riam budhi wrote:
                                >>> Assalamualikum Mr Juergen,
                                >>>
                                >>> I have checked this bug, but I still confuse How to fix this
                                > problem...??
                                >>> Because I look for at sunsolve.sun.com no document to fix this bug.
                                >>>
                                >>> Please help me mr juergen..
                                >>>
                                >>> Wassalam
                                >>>
                                >>> wisenu
                                >>>
                                >>> On 9/3/07, Juergen Keil <jk@...> wrote:
                                >>>> --- In solarisx86@yahoogroups.com
                                > <solarisx86%40yahoogroups.com>, "riam
                                >>>> budhi" <riamwisnu@> wrote:
                                >>>>
                                >>>>> more /var/adm/message command :
                                >>>>> ...
                                >>>>> Sep 3 15:00:52 nmsa nge: [ID 801725 kern.warning] WARNING: nge0:
                                >>>>> nge_attach: nge_chip_reset() failed
                                >>>> I guess this warning message might explain why nge0 fails to plumb.
                                >>>>
                                >>>> Could be this bug:
                                >>>> Bug ID: 6531267
                                >>>> Synopsis: nge port hang while running multiple TCP connections
                                > testing
                                >>>> on x6200 blade
                                >>>> http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6531267
                                >> I seriously doubt this bug is your problem. The bug he mentions is
                                > only caused
                                >> using a test program called NICDRV which has multiple TCP
                                > connections going at
                                >> once through the interface. Your problem is that you say it is not
                                > being plumbed.
                                >
                                > Hmm, but isn't that exactly what is written in 6531267's
                                > description text?
                                >
                                > From 6531267's description:
                                >
                                > "While system booting, nge1 interface failed to attach,..."
                                >
                                > "Mar 6 04:14:35 groweth nge: [ID 801725 kern.warning] WARNING:
                                > nge1: nge_attach: nge_chip_reset() failed"
                                >
                                > "...And we found nge1 was not plumbed due to this reason:"
                                >
                                >
                                >
                                > "riam budhi" <riamwisnu@...> isn't running that test program
                                > called NICDRV, but the way the nge0 nic fails to plumb at boot time
                                > looks similar to the failure for nge1 from 6531267.

                                Hmmm. I was looking at the Synopsis and the Comments section (which you can't
                                see externally). Here is the start of that:

                                Before the system reboot, we had ran NICDRV testing suite on nge1 interface. The
                                ftp and netperf test case failed, and finally, the the port hang seems to
                                happened. After we reboot system, nge1 failed to attach, and we ran into this
                                issue. NICDRV need 2 test machines, by now, only client side ran into this
                                issue. It's runnig on Solaris x86 32bit kernel with nge driver (latest
                                developement version).

                                So they do get the driver to attach during the initial test, but it fails to
                                attach *after* they have run the test and get it to hang. That sounds like the
                                hardware gets into a state from which it does not recover.

                                In the Evaluation section it says the failure to attach is probably bug 6501159:
                                nge driver failed to attach after heavy network IO stress testing

                                I goofed and was doing a search in the bge category, instead of nge. That is
                                why my search failed.

                                Mike
                              Your message has been successfully submitted and would be delivered to recipients shortly.