Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] RE: power supply caps alternately smoking

Expand Messages
  • cbayona
    To cook a cap with the soldering iron takes extra effort or a poor tool, how long do you put the soldering iron against the joint? The soldering iron is a most
    Message 1 of 20 , Sep 29 8:32 AM
    • 0 Attachment
      To cook a cap with the soldering iron takes extra effort or a poor
      tool, how long do you put the soldering iron against the joint?

      The soldering iron is a most important tool, buying a cheap one is
      false economy, besides one can buy a fairly good temperature
      controlled iron for under $40 and it will last you a lifetime. I use
      a Solomon SR-976 it's sold under various brand names it's heating
      element is a 48 watts quick heating ceramic heater. It maintains a
      constant temperature and goes from dead cold to ready to use in under
      5 seconds. I have two of them, the original one is over 15 years old
      and still has the original tip because a temperature controlled
      soldering iron does not allow the tip to get any hotter (which
      damages the tip) than the set temperature unlike a simple dumb iron.
      With it soldering a joint is a less than two second affair.

      This is where I bought mine many years ago so you can get an idea of
      what are the features of a temperature controlled iron, I still see
      them in other places for $35. This is by no means the only iron of
      it's kind, Weller, and Hakko are other well know brands.

      <
      <http://www.circuitspecialists.com/sr-976n-solder-station.html>http://www.circuitspecialists.com/sr-976n-solder-station.html
      >


      At 01:35 AM 9/29/2013, you wrote:


      >Thanks paul, polarity is ok. I'm pretty shure I cooked them using my
      >25w iron (my 15w had just died). I have bought a new 12w weller
      >pencil iron today & sent an e mail to Tony about getting some more
      >10uf caps. Rs & my local ham radio/electronics stores did not have
      >the right caps :/

      --
      Cecil - k5nwa
      < http://thepartsplace.k5nwa.com/ > < http://www.softrockradio.org/ >

      Never take life seriously. Nobody gets out alive anyway.
    • Zack Widup
      I have never destroyed a device with heat by soldering it or heating it with a heat gun. Never. I would really suspect the polarity. I ve noticed on a few caps
      Message 2 of 20 , Sep 29 10:20 AM
      • 0 Attachment
        I have never destroyed a device with heat by soldering it or heating
        it with a heat gun. Never. I would really suspect the polarity. I've
        noticed on a few caps I've purchased that for some reason they put the
        band on the negative end. It usually goes on the positive end. But the
        data sheet for that particular part says so. The only other reason
        would be a voltage beyond the rating of the cap.

        73, Zack W9SZ

        On 9/29/13, slickjimmy76@... <slickjimmy76@...> wrote:
        >
        >
        > Thanks paul, polarity is ok. I'm pretty shure I cooked them using my 25w
        > iron (my 15w had just died). I have bought a new 12w weller pencil iron
        > today sent an e mail to Tony about getting some more 10uf caps. Rs my local
        > ham radio/electronics stores did not have the right caps :/
        >
        >
      • Paul Playford
        Ah youth. Electrolytic capacitors have always had the band on the negative end. Tantalum capacitors have their band on the positive end. Just to keep life
        Message 3 of 20 , Sep 29 11:44 AM
        • 0 Attachment
          Ah youth. Electrolytic capacitors have always had the band on the negative
          end.

          Tantalum capacitors have their band on the positive end.

          Just to keep life interesting.

          de Paul, W8AEF

          -----Original Message-----
          From: Zack Widup
          Sent: Sunday, September 29, 2013 10:20 AM
          To: softrock40@yahoogroups.com
          Subject: Re: [softrock40] RE: power supply caps alternately smoking

          I have never destroyed a device with heat by soldering it or heating
          it with a heat gun. Never. I would really suspect the polarity. I've
          noticed on a few caps I've purchased that for some reason they put the
          band on the negative end. It usually goes on the positive end. But the
          data sheet for that particular part says so. The only other reason
          would be a voltage beyond the rating of the cap.

          73, Zack W9SZ
        • Chris Wilson
          ... 29/09/2013 20:34 I learn something from this forum every day! Noted, it is a bit like Jaguar having the number one designated cylinder at the back, by the
          Message 4 of 20 , Sep 29 12:35 PM
          • 0 Attachment
            > Ah youth. Electrolytic capacitors have always had the band on the negative
            > end.

            > Tantalum capacitors have their band on the positive end.

            > Just to keep life interesting.

            > de Paul, W8AEF



            29/09/2013 20:34

            I learn something from this forum every day! Noted, it is a bit like
            Jaguar having the number one designated cylinder at the back, by the
            bulkhead, on their early straight six engines, just to confuse people
            timing them up :)

            --
            Best Regards,
            Chris Wilson. 2E0ILY
          • horsefly76
            Band on - side also marked with a - sign along the band. The long leg + side unmarked. I have pictures to prove it lol as I took a few during the build for
            Message 5 of 20 , Sep 29 6:19 PM
            • 0 Attachment

               Band on - side also marked with a - sign along the band.  The long leg + side unmarked. I have pictures to prove it lol as I took a few during the build for reference. 


              Gotta go stakes on the grill! :)


              Aaron.



              ---In softrock40@yahoogroups.com, <chris@...> wrote:

              > Ah youth. Electrolytic capacitors have always had the band on the negative
              > end.

              > Tantalum capacitors have their band on the positive end.

              > Just to keep life interesting.

              > de Paul, W8AEF



              29/09/2013 20:34

              I learn something from this forum every day! Noted, it is a bit like
              Jaguar having the number one designated cylinder at the back, by the
              bulkhead, on their early straight six engines, just to confuse people
              timing them up :)

              --
              Best Regards,
              Chris Wilson. 2E0ILY
            • Zack Widup
              All the surface-mount electrolytics I use must be tantalums. They all have the positive side marked with a band. Youth? I ve been a licensed ham since 1967.
              Message 6 of 20 , Sep 29 10:58 PM
              • 0 Attachment
                All the surface-mount electrolytics I use must be tantalums. They all
                have the positive side marked with a band.

                Youth? I've been a licensed ham since 1967. Been building electronics
                since before that. I worked in an electronics repair shop for 15
                years. Most of my own construction work is surface-mount these days.
                Just finished designing and building a board for an LNDFS circuit that
                will be the LO for a 47 GHz transverter. Looks good so far. Still have
                to multiply the 159 MHz frequency by 288. :-)

                73, Zack W9SZ

                On 9/29/13, Paul Playford <w8aef@...> wrote:
                > Ah youth. Electrolytic capacitors have always had the band on the negative
                >
                > end.
                >
                > Tantalum capacitors have their band on the positive end.
                >
                > Just to keep life interesting.
                >
                > de Paul, W8AEF
                >
                > -----Original Message-----
                > From: Zack Widup
                > Sent: Sunday, September 29, 2013 10:20 AM
                > To: softrock40@yahoogroups.com
                > Subject: Re: [softrock40] RE: power supply caps alternately smoking
                >
                > I have never destroyed a device with heat by soldering it or heating
                > it with a heat gun. Never. I would really suspect the polarity. I've
                > noticed on a few caps I've purchased that for some reason they put the
                > band on the negative end. It usually goes on the positive end. But the
                > data sheet for that particular part says so. The only other reason
                > would be a voltage beyond the rating of the cap.
                >
                > 73, Zack W9SZ
                >
                >
                >
                > ------------------------------------
                >
                > Yahoo! Groups Links
                >
                >
                >
                >
              • Richard Mogford
                Hi Does anyone know anything about the UPS2SDR board and its availability? Richard From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On
                Message 7 of 20 , Sep 29 11:19 PM
                • 0 Attachment

                  Hi

                   

                  Does anyone know anything about the UPS2SDR  board and its availability?

                   

                  Richard

                   

                  From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of Zack Widup
                  Sent: Sunday, September 29, 2013 10:58 PM
                  To: softrock40@yahoogroups.com
                  Subject: Re: [softrock40] RE: power supply caps alternately smoking

                   

                   

                  All the surface-mount electrolytics I use must be tantalums. They all
                  have the positive side marked with a band.

                  Youth? I've been a licensed ham since 1967. Been building electronics
                  since before that. I worked in an electronics repair shop for 15
                  years. Most of my own construction work is surface-mount these days.
                  Just finished designing and building a board for an LNDFS circuit that
                  will be the LO for a 47 GHz transverter. Looks good so far. Still have
                  to multiply the 159 MHz frequency by 288. :-)

                  73, Zack W9SZ

                  On 9/29/13, Paul Playford <w8aef@...> wrote:
                  > Ah youth. Electrolytic capacitors have always had the band on the negative
                  >
                  > end.
                  >
                  > Tantalum capacitors have their band on the positive end.
                  >
                  > Just to keep life interesting.
                  >
                  > de Paul, W8AEF
                  >
                  > -----Original Message-----
                  > From: Zack Widup
                  > Sent: Sunday, September 29, 2013 10:20 AM
                  > To: softrock40@yahoogroups.com
                  > Subject: Re: [softrock40] RE: power supply caps alternately smoking
                  >
                  > I have never destroyed a device with heat by soldering it or heating
                  > it with a heat gun. Never. I would really suspect the polarity. I've
                  > noticed on a few caps I've purchased that for some reason they put the
                  > band on the negative end. It usually goes on the positive end. But the
                  > data sheet for that particular part says so. The only other reason
                  > would be a voltage beyond the rating of the cap.
                  >
                  > 73, Zack W9SZ
                  >
                  >
                  >
                  > ------------------------------------
                  >
                  > Yahoo! Groups Links
                  >
                  >
                  >
                  >

                • Doug Luurs
                  Stakes ?? I hope you’re not planning to use those on any vampires *Grins* Doug From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On
                  Message 8 of 20 , Sep 30 3:29 AM
                  • 0 Attachment

                    Stakes ??  I hope you’re not planning to use those on any vampires *Grins*

                     

                    Doug

                     

                    From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of slickjimmy76@...
                    Sent: Sunday, September 29, 2013 9:20 PM
                    To: softrock40@yahoogroups.com
                    Subject: [softrock40] RE: power supply caps alternately smoking

                     

                     

                     Band on - side also marked with a - sign along the band.  The long leg + side unmarked. I have pictures to prove it lol as I took a few during the build for reference. 

                     

                    Gotta go stakes on the grill! :)

                     

                    Aaron.



                    ---In softrock40@yahoogroups.com, <chris@...> wrote:

                    > Ah youth. Electrolytic capacitors have always had the band on the negative
                    > end.

                    > Tantalum capacitors have their band on the positive end.

                    > Just to keep life interesting.

                    > de Paul, W8AEF




                    29/09/2013 20:34

                    I learn something from this forum every day! Noted, it is a bit like
                    Jaguar having the number one designated cylinder at the back, by the
                    bulkhead, on their early straight six engines, just to confuse people
                    timing them up :)

                    --
                    Best Regards,
                    Chris Wilson. 2E0ILY

                  • Chris Wilson
                    ... 30/09/2013 12:22 This steak s like a piece of board :) -- Best Regards, Chris Wilson. 2E0ILY
                    Message 9 of 20 , Sep 30 4:22 AM
                    • 0 Attachment
                      >

                      > Stakes ?? I hope you’re not planning to use those on any vampires *Grins*
                      >
                      > Doug
                      >


                      30/09/2013 12:22


                      "This steak's like a piece of board" :)


                      --
                      Best Regards,
                      Chris Wilson. 2E0ILY
                    • Brad Thompson
                      ... Hello, Zack and the group-- Zack, you no doubt already know about this but some of the group s newcomers may not. If there s any doubt, connect a
                      Message 10 of 20 , Sep 30 5:56 AM
                      • 0 Attachment
                        On 9/30/2013 1:58 AM, Zack Widup wrote:
                        > All the surface-mount electrolytics I use must be tantalums. They all
                        > have the positive side marked with a band.
                        >
                        <snip>

                        Hello, Zack and the group--

                        Zack, you no doubt already know about this but some of the
                        group's newcomers may not.

                        If there's any doubt, connect a resistor (say, 10 ohms at 1/4 watt)
                        in series with the purported positive terminal and then
                        connect the series network across a power supply set to the
                        capacitor's rated voltage (network plus to plus, minus to minus).

                        If the capacitor and/or resistor smoke, the assumed polarity is
                        incorrect.

                        For further reassurance, identify the capacitor's manufacturer and
                        consult the part's data sheet.

                        Your for creative smoke testing, and 73--

                        Brad AA1IP
                      • horsefly76
                        Ya that s what I get for using my smart phone, it auto corrects everything I type. I had to teach it steak just now lol
                        Message 11 of 20 , Sep 30 7:18 AM
                        • 0 Attachment
                          Ya that's what I get for using my "smart" phone, it auto corrects everything I type. I had to teach it "steak" just now lol
                        • John Rabson
                          ... Better than some dictation software. I once did the publicity for a village party, and bring a dish came out as bring a geisha . John
                          Message 12 of 20 , Sep 30 7:31 AM
                          • 0 Attachment
                            On 30 Sep 2013, at 16:18CEST, <slickjimmy76@...> <slickjimmy76@...> wrote:

                            > Ya that's what I get for using my "smart" phone, it auto corrects everything I type. I had to teach it "steak" just now lol

                            Better than some dictation software. I once did the publicity for a village party, and "bring a dish" came out as "bring a geisha".

                            John
                          • Peter Johnson
                            Hi John. Bet you had a good turnout. Regards Peter F1VKK
                            Message 13 of 20 , Sep 30 7:35 AM
                            • 0 Attachment
                              Hi John.

                              Bet you had a good turnout.

                              Regards Peter F1VKK



                              On 30/09/2013 16:31, John Rabson wrote:
                              > On 30 Sep 2013, at 16:18CEST, <slickjimmy76@...> <slickjimmy76@...> wrote:
                              >
                              >> Ya that's what I get for using my "smart" phone, it auto corrects everything I type. I had to teach it "steak" just now lol
                              > Better than some dictation software. I once did the publicity for a village party, and "bring a dish" came out as "bring a geisha".
                              >
                              > John
                            • horsefly76
                              Tony is sending me 10 more caps free of charge :) I offered to pay but Tony would have none of that. Wont be able to finish till next weekend as I m at work 11
                              Message 14 of 20 , Sep 30 8:06 AM
                              • 0 Attachment
                                Tony is sending me 10 more caps free of charge :) I offered to pay but Tony would have none of that. Wont be able to finish till next weekend as I'm at work 11 to 13 hrs a day.
                              • horsefly76
                                Tony is sending me 10 more caps free of charge :) I offered to pay but Tony would have none of that. Wont be able to finish till next weekend as I m at work 11
                                Message 15 of 20 , Sep 30 8:07 AM
                                • 0 Attachment
                                  Tony is sending me 10 more caps free of charge :) I offered to pay but Tony would have none of that. Wont be able to finish till next weekend as I'm at work 11 to 13 hrs a day.
                                • horsefly76
                                  I did find one small discrepancy with C 23. silk screening on my board does not match the completed assembly picture in the manual. I emailed Tony and he said
                                  Message 16 of 20 , Oct 1, 2013
                                  • 0 Attachment
                                    I did find one small discrepancy with C 23. silk screening on my board does not match the completed assembly picture in the manual. I emailed Tony and he said to go by he silk screening on the board/schematic & not the picture. The picture in the assembly drawing was for a different board. Thank you Tony & the fourm here for your help so far, I'm shure I will have many more questions.
                                  • Zack Widup
                                    Yes, I do that quite a bit. Very similar to the trick I learned years ago with AC-powered solid-state audio amps. Often the output and driver transistors and
                                    Message 17 of 20 , Oct 2, 2013
                                    • 0 Attachment
                                      Yes, I do that quite a bit. Very similar to the trick I learned years
                                      ago with AC-powered solid-state audio amps. Often the output and
                                      driver transistors and other transistors will go bad by shorting out.
                                      After replacing all the ones you think are bad, you may miss one or
                                      two. This will probably cause a short to still present itself to the
                                      AC line input. Instead of going through half a box of fuses and
                                      possibly damaging more parts, use a 75 or 100 watt incandescent light
                                      bulb in series with the 110 volts AC. If, when turning on the circuit,
                                      the bulb glows brightly for a second and then diminishes as the power
                                      supply capacitors charge up, everything is OK and you can remove the
                                      bulb from the circuit. If the bulb remains fully brightly lit, you
                                      still have a problem. I've used this technique countless times.

                                      It wasn't clear to me what kind of capacitors were smoking. If they
                                      were the radial-leaded type, the band is on the negative end. I've had
                                      tantalum surface-mount caps in backwards, too. They will also get
                                      extremely hot and smoke, or maybe even just blow off the board.
                                      Sometimes taking part of the board with them. :-(

                                      73, Zack W9SZ


                                      On 9/30/13, Brad Thompson <brad.thompson@...> wrote:
                                      > On 9/30/2013 1:58 AM, Zack Widup wrote:
                                      >> All the surface-mount electrolytics I use must be tantalums. They all
                                      >> have the positive side marked with a band.
                                      >>
                                      > <snip>
                                      >
                                      > Hello, Zack and the group--
                                      >
                                      > Zack, you no doubt already know about this but some of the
                                      > group's newcomers may not.
                                      >
                                      > If there's any doubt, connect a resistor (say, 10 ohms at 1/4 watt)
                                      > in series with the purported positive terminal and then
                                      > connect the series network across a power supply set to the
                                      > capacitor's rated voltage (network plus to plus, minus to minus).
                                      >
                                      > If the capacitor and/or resistor smoke, the assumed polarity is
                                      > incorrect.
                                      >
                                      > For further reassurance, identify the capacitor's manufacturer and
                                      > consult the part's data sheet.
                                      >
                                      > Your for creative smoke testing, and 73--
                                      >
                                      > Brad AA1IP
                                      >
                                      >
                                    Your message has been successfully submitted and would be delivered to recipients shortly.