... Subject: Re: [softrock40] HDSDR - CPU usage / temperature ... Yes, graphics is a major CPU hogger. That may be one reason people see different CPU loads
Message 1 of 3
, Aug 3, 2013
----- Original Message -----
Subject: Re: [softrock40] HDSDR - CPU usage / temperature
> FYI, this also works the same on pretty much any other software
> application with a scrolling waterfall that I've used. JT65-HF is a
> great example. I used to run JT65 on a P3-1ghz machine, it would
> completely bog down with normal JT65-HF UI settings but worked great
> with the waterfall slowed to the minimum. I guess all of those FFT's for
> generating the display must use CPU. :D
Yes, graphics is a major CPU hogger.
That may be one reason people see different CPU loads for different software.
Reducing the refresh rate reduces CPU.
And note you may turn off HDSDR's display completely, Visualisation:- de-select both displays.
73 Alan G4ZFQ
>> Just noticed this and thought I will post it if anyone is interested.
>> Using HDSDR, I noticed my cpu usage and temperature were both
>> abnormally high - much higher than I remembered it being before.
>> Snooped around a bit and discovered that I had the RF Display speed
>> maxed out. Lowering this just a bit had a dramatic effect on cpu
>> usage: it dropped from around 40% down to around 10%, and cpu
>> temperature also decreased. Interestingly, changing the bandwidth
>> (192000 down to 12000) had only a minor effect on cpu usage. I leave
>> the Softrock on a lot just to listen to AM broadcast band while doing
>> other tasks, so I am now running at lower settings here unless there
>> is a good reason not to - saves on CPU wear and tear!
Your message has been successfully submitted and would be delivered to recipients shortly.