Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] 200 Mhz DDS

Expand Messages
  • Mathison Ott
    http://uvb-76.net/p/sdr-mk15-andrus.html 73 kj6dzb
    Message 1 of 4 , Jul 8, 2013
    • 0 Attachment

      On Mon, Jul 8, 2013 at 2:52 PM, Ravi Miranda <ravimiranda@...> wrote:


      Thank you for your email. I did know that you make the boards, but I'm trying to make the board from scratch to fit some size restrictions and then build other modular boards from there all to standard sizes, hence I was searching for a generic board/circuit.

      Will keep you posted on the progress.


      2E0RVI /Ravi Miranda

      On 3 July 2013 23:17, Dave <dave@...> wrote:

        I sell a 995X board which works with AD9951 thru AD9954.  With a 500 MHz clock, it will go to 200 MHz.  The board also has a programmable attenuator and a QSD receiver good to 100+ MHz.  It is USB controlled.  It is not necessary to populate the QSD portion of the programmable attenuator.  It is at

      Dave - WB6DHW

      On 7/3/2013 2:36 PM, Ravi Miranda wrote:

      I'm looking to build a DDS VFO uptil 200MHz at least.

      Any working circuits that are viable besides the AD9851, as I'm looking for something with minimal jitter.

      Has anyone built a board around the AD9951? The main concern is the REFCLK which for a 160Mhz signal will need to be 400Mhz at least.

      Or are DDSes something that I should stop looking at and switch to an Si570? Cypress chips seem workable but I've not been there before.


      I'm here to add more value to the world than I'm using up.

      I'm here to add more value to the world than I'm using up.

    Your message has been successfully submitted and would be delivered to recipients shortly.