Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] RX II with WebSDR help

Expand Messages
  • Sid Boyce
    I don t know of any way of putting a softrock on the net with webSDR using Linux. Have a look at http://napan.ca/ghpsdr3/index.php/Main_Page Check some of the
    Message 1 of 20 , Jun 18, 2013
    • 0 Attachment
      I don't know of any way of putting a softrock  on the net with webSDR using Linux.

      Have a look at http://napan.ca/ghpsdr3/index.php/Main_Page
      Check some of the URL's to see who is online and where.
      http://qtradio.napan.ca/qtradio/qtradio.pl
      http://www.montefusco.com/ghpsdr3

      Access to servers is via QtRadio.

      I use ghpsdr3-alex to put Softrock, UHFSDR, rtl-sdr, HiQSDQ and openHPSDR Hermes online using it.
      There is also a java app on Google Play to make online servers available using glSDR on an Android phone.
      The first connection or the owner who can force master. Master can tune, slaves can only listen to where master is tuned.

      If you go to a RXTX, TX is also supported and users with a login ID and password on any server can TX.
      73 ... Sid.

      On 19/06/13 00:49, David wrote:
       

      Hello all

      I'm wondering if any one is using the WebSDR server software for Lunux.

      I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.

      Thanks all
      Dave



      -- 
      Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
      Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
      Senior Staff Specialist, Cricket Coach
      Microsoft Windows Free Zone - Linux used for all Computing Tasks
      
    • Hide
      Hi Dave, You should contact to the author of the Websdr by following site; http://www.websdr.org/ The websdr software is special function program and you can
      Message 2 of 20 , Jun 19, 2013
      • 0 Attachment
        Hi Dave,

        You should contact to the author of the Websdr by following site;

        http://www.websdr.org/

        The websdr software is special function program and you can get
        software from him directly usong the e-mail.

        ja9mat hidehiko.


        --- In softrock40@yahoogroups.com, "David" <n1ohn@...> wrote:
        >
        > Hello all
        >
        > I'm wondering if any one is using the WebSDR server software for Lunux.
        >
        > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
        >
        > Thanks all
        > Dave
        >
      • Dave
        Hi Thanks I have the software Dave
        Message 3 of 20 , Jun 19, 2013
        • 0 Attachment
          Hi 

          Thanks I have the software 

          Dave


          On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:

           

          Hi Dave,

          You should contact to the author of the Websdr by following site;

          http://www.websdr.org/

          The websdr software is special function program and you can get
          software from him directly usong the e-mail.

          ja9mat hidehiko.

          --- In softrock40@yahoogroups.com, "David" <n1ohn@...> wrote:
          >
          > Hello all
          >
          > I'm wondering if any one is using the WebSDR server software for Lunux.
          >
          > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
          >
          > Thanks all
          > Dave
          >

        • Hide
          OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit
          Message 4 of 20 , Jun 19, 2013
          • 0 Attachment
            OK, sorry...

            You should read the help about the websdr.cfg file
            and configure as your Ubuntu sound configuration at first.
            Sound system is a little bit confusing but you can do it.

            ja9mat Hidehiko.

            --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
            >
            > Hi
            >
            > Thanks I have the software
            >
            > Dave
            >
            >
            > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
            >
            > > Hi Dave,
            > >
            > > You should contact to the author of the Websdr by following site;
            > >
            > > http://www.websdr.org/
            > >
            > > The websdr software is special function program and you can get
            > > software from him directly usong the e-mail.
            > >
            > > ja9mat hidehiko.
            > >
            > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
            > > >
            > > > Hello all
            > > >
            > > > I'm wondering if any one is using the WebSDR server software for Lunux.
            > > >
            > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
            > > >
            > > > Thanks all
            > > > Dave
            > > >
            > >
            > >
            >
          • Dave
            Thanks I did that many times. not the sound that s the big problem it will not control the unit. Is anyone actually running the WebSDR server end software in
            Message 5 of 20 , Jun 19, 2013
            • 0 Attachment
              Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

              Is anyone actually running the WebSDR server end software in group that can help? 

              Thanks again all :) 

              Dave


              On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

               

              OK, sorry...

              You should read the help about the websdr.cfg file
              and configure as your Ubuntu sound configuration at first.
              Sound system is a little bit confusing but you can do it.

              ja9mat Hidehiko.

              --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
              >
              > Hi
              >
              > Thanks I have the software
              >
              > Dave
              >
              >
              > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
              >
              > > Hi Dave,
              > >
              > > You should contact to the author of the Websdr by following site;
              > >
              > > http://www.websdr.org/
              > >
              > > The websdr software is special function program and you can get
              > > software from him directly usong the e-mail.
              > >
              > > ja9mat hidehiko.
              > >
              > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
              > > >
              > > > Hello all
              > > >
              > > > I'm wondering if any one is using the WebSDR server software for Lunux.
              > > >
              > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
              > > >
              > > > Thanks all
              > > > Dave
              > > >
              > >
              > >
              >

            • Joe Basque
              Dave, I run several softrocks using websdr I use a pc 3 bands and a raspberry pi for 17 Mtrs 1. You can not control the frequency of the sdr with websdr. USB
              Message 6 of 20 , Jun 19, 2013
              • 0 Attachment
                Dave,
                I run several softrocks using websdr
                I use a pc 3 bands and a raspberry pi for 17 Mtrs

                1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                Hope this helps
                Joe
                Ve1bwv

                Sent from my iPhone

                On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                 

                Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                Is anyone actually running the WebSDR server end software in group that can help? 

                Thanks again all :) 

                Dave


                On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                 

                OK, sorry...

                You should read the help about the websdr.cfg file
                and configure as your Ubuntu sound configuration at first.
                Sound system is a little bit confusing but you can do it.

                ja9mat Hidehiko.

                --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                >
                > Hi
                >
                > Thanks I have the software
                >
                > Dave
                >
                >
                > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                >
                > > Hi Dave,
                > >
                > > You should contact to the author of the Websdr by following site;
                > >
                > > http://www.websdr.org/
                > >
                > > The websdr software is special function program and you can get
                > > software from him directly usong the e-mail.
                > >
                > > ja9mat hidehiko.
                > >
                > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                > > >
                > > > Hello all
                > > >
                > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                > > >
                > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                > > >
                > > > Thanks all
                > > > Dave
                > > >
                > >
                > >
                >

              • David.Lopez
                Is there something similar to WebSDR where it can transmit and be used as a transceiver? I am sure there will need to be something for authentication of FCC
                Message 7 of 20 , Jun 19, 2013
                • 0 Attachment
                  Is there something similar to WebSDR where it can transmit and be used as a transceiver?  I am sure there will need to be something for authentication of FCC license and band privileges.  This can help people that don't have a band capability due to antenna restrictions or the the funds to buy a new radio. This is a great idea whoever came up with this.

                  N6RI
                • JOSEPH BASQUE
                  Websdr is the only software which allows simultaneous tuning of the rx by many many users, but no TX functions. RX and TX GLSDR for android as a client and
                  Message 8 of 20 , Jun 19, 2013
                  • 0 Attachment
                    Websdr is the only software which allows simultaneous tuning of the rx by many many users, but no TX functions.


                    RX and TX

                    GLSDR for android as a client and linux software server

                    Info here:

                    Ve1bwv
                    Joe

                    From: David.Lopez <brewgod23@...>
                    To: softrock40@yahoogroups.com
                    Sent: Wednesday, June 19, 2013 7:37:48 PM
                    Subject: [softrock40] Re: RX II with WebSDR help

                     
                    Is there something similar to WebSDR where it can transmit and be used as a transceiver?  I am sure there will need to be something for authentication of FCC license and band privileges.  This can help people that don't have a band capability due to antenna restrictions or the the funds to buy a new radio. This is a great idea whoever came up with this.

                    N6RI


                  • Dave
                    Hi Joe Is cfsgr a version for Ubuntu? And we re do I get the LCD kit? Thanks Joe! Dave
                    Message 9 of 20 , Jun 19, 2013
                    • 0 Attachment
                      Hi Joe 

                      Is cfsgr a version for Ubuntu? 

                      And we're do I get the LCD kit? 

                      Thanks Joe! 

                      Dave


                      On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                       

                      Dave,
                      I run several softrocks using websdr
                      I use a pc 3 bands and a raspberry pi for 17 Mtrs

                      1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                      2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                      3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                      4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                      Hope this helps
                      Joe
                      Ve1bwv

                      Sent from my iPhone

                      On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                       

                      Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                      Is anyone actually running the WebSDR server end software in group that can help? 

                      Thanks again all :) 

                      Dave


                      On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                       

                      OK, sorry...

                      You should read the help about the websdr.cfg file
                      and configure as your Ubuntu sound configuration at first.
                      Sound system is a little bit confusing but you can do it.

                      ja9mat Hidehiko.

                      --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                      >
                      > Hi
                      >
                      > Thanks I have the software
                      >
                      > Dave
                      >
                      >
                      > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                      >
                      > > Hi Dave,
                      > >
                      > > You should contact to the author of the Websdr by following site;
                      > >
                      > > http://www.websdr.org/
                      > >
                      > > The websdr software is special function program and you can get
                      > > software from him directly usong the e-mail.
                      > >
                      > > ja9mat hidehiko.
                      > >
                      > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                      > > >
                      > > > Hello all
                      > > >
                      > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                      > > >
                      > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                      > > >
                      > > > Thanks all
                      > > > Dave
                      > > >
                      > >
                      > >
                      >

                    • Sid Boyce
                      CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup
                      Message 10 of 20 , Jun 19, 2013
                      • 0 Attachment
                        CFGSR is a .exe utility for Windows only.
                        usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                        73 ... Sid.

                        On 20/06/13 00:54, Dave wrote:
                         
                        Hi Joe 

                        Is cfsgr a version for Ubuntu? 

                        And we're do I get the LCD kit? 

                        Thanks Joe! 

                        Dave


                        On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                         
                        Dave,
                        I run several softrocks using websdr
                        I use a pc 3 bands and a raspberry pi for 17 Mtrs

                        1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                        2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                        3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                        4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                        Hope this helps
                        Joe
                        Ve1bwv

                        Sent from my iPhone

                        On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                         
                        Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                        Is anyone actually running the WebSDR server end software in group that can help? 

                        Thanks again all :) 

                        Dave


                        On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                         

                        OK, sorry...

                        You should read the help about the websdr.cfg file
                        and configure as your Ubuntu sound configuration at first.
                        Sound system is a little bit confusing but you can do it.

                        ja9mat Hidehiko.

                        --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                        >
                        > Hi
                        >
                        > Thanks I have the software
                        >
                        > Dave
                        >
                        >
                        > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                        >
                        > > Hi Dave,
                        > >
                        > > You should contact to the author of the Websdr by following site;
                        > >
                        > > http://www.websdr.org/
                        > >
                        > > The websdr software is special function program and you can get
                        > > software from him directly usong the e-mail.
                        > >
                        > > ja9mat hidehiko.
                        > >
                        > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                        > > >
                        > > > Hello all
                        > > >
                        > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                        > > >
                        > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                        > > >
                        > > > Thanks all
                        > > > Dave
                        > > >
                        > >
                        > >
                        >



                        -- 
                        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                        Senior Staff Specialist, Cricket Coach
                        Microsoft Windows Free Zone - Linux used for all Computing Tasks
                        
                      • Bill Cromwell
                        ... Hi, I have been running *ALL* of the ham type software in Linux under WINE. Some say WINE means Windows emulator, but other say WINE means WINE is not an
                        Message 11 of 20 , Jun 19, 2013
                        • 0 Attachment
                          On 06/19/2013 08:15 PM, Sid Boyce wrote:
                          >
                          > CFGSR is a .exe utility for Windows only.
                          > usbsoftrock which you have installed provides the functionality that
                          > allows you to calibrate the si570, set startup frequency if needed,
                          > set RX frequency, etc.
                          > 73 ... Sid.
                          >

                          Hi,

                          I have been running *ALL* of the ham type software in Linux under WINE.
                          Some say WINE means Windows emulator, but other say WINE means "WINE is
                          not an emulator. WINE is an environment that supports windows programs
                          under a Linux OS. Depending on a lot of factors that may not all be
                          under your control you may find some applications that fail in WINE. If
                          it's free, give it a try. I'm going to.

                          73,

                          Bill KU8H
                        • Dave
                          Yes that what I thought. So how do we control the unit when it s in server mode with WebSDR? ... Dave
                          Message 12 of 20 , Jun 19, 2013
                          • 0 Attachment
                            Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                            :) 

                            Dave


                            On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:

                             

                            CFGSR is a .exe utility for Windows only.
                            usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                            73 ... Sid.

                            On 20/06/13 00:54, Dave wrote:
                             
                            Hi Joe 

                            Is cfsgr a version for Ubuntu? 

                            And we're do I get the LCD kit? 

                            Thanks Joe! 

                            Dave


                            On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                             
                            Dave,
                            I run several softrocks using websdr
                            I use a pc 3 bands and a raspberry pi for 17 Mtrs

                            1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                            2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                            3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                            4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                            Hope this helps
                            Joe
                            Ve1bwv

                            Sent from my iPhone

                            On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                             
                            Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                            Is anyone actually running the WebSDR server end software in group that can help? 

                            Thanks again all :) 

                            Dave


                            On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                             

                            OK, sorry...

                            You should read the help about the websdr.cfg file
                            and configure as your Ubuntu sound configuration at first.
                            Sound system is a little bit confusing but you can do it.

                            ja9mat Hidehiko.

                            --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                            >
                            > Hi
                            >
                            > Thanks I have the software
                            >
                            > Dave
                            >
                            >
                            > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                            >
                            > > Hi Dave,
                            > >
                            > > You should contact to the author of the Websdr by following site;
                            > >
                            > > http://www.websdr.org/
                            > >
                            > > The websdr software is special function program and you can get
                            > > software from him directly usong the e-mail.
                            > >
                            > > ja9mat hidehiko.
                            > >
                            > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                            > > >
                            > > > Hello all
                            > > >
                            > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                            > > >
                            > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                            > > >
                            > > > Thanks all
                            > > > Dave
                            > > >
                            > >
                            > >
                            >



                            -- 
                            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                            Senior Staff Specialist, Cricket Coach
                            Microsoft Windows Free Zone - Linux used for all Computing Tasks
                            

                          • Sid Boyce
                            ... I tried PSDR, Rocky and Kisskonsole under Crossover Office. PSDR recently was as slow as treacle painting the buttons so it was not usable. Rocky couldn t
                            Message 13 of 20 , Jun 19, 2013
                            • 0 Attachment
                              On 20/06/13 01:28, Bill Cromwell wrote:
                               

                              On 06/19/2013 08:15 PM, Sid Boyce wrote:
                              >
                              > CFGSR is a .exe utility for Windows only.
                              > usbsoftrock which you have installed provides the functionality that
                              > allows you to calibrate the si570, set startup frequency if needed,
                              > set RX frequency, etc.
                              > 73 ... Sid.
                              >

                              Hi,

                              I have been running *ALL* of the ham type software in Linux under WINE.
                              Some say WINE means Windows emulator, but other say WINE means "WINE is
                              not an emulator. WINE is an environment that supports windows programs
                              under a Linux OS. Depending on a lot of factors that may not all be
                              under your control you may find some applications that fail in WINE. If
                              it's free, give it a try. I'm going to.

                              73,

                              Bill KU8H

                              I tried PSDR, Rocky and Kisskonsole under Crossover Office.
                              PSDR recently was as slow as treacle painting the buttons so it was not usable.

                              Rocky couldn't see the sound cards - that was some years ago. WMP used to work some years before that but it didn't when I tried Rocky.

                              Kissconsole finds Hermes, then it fails looking for Alex, there is no Alex fitted to Hermes.

                              I have a new version of Crossover Office I need to try.

                              All the same results above applied to wine. Crossover Office supports a lot more than wine and it's enhancements are fed back into wine on expiry of any NDA's Codeweavers has to honour.
                              73 ... Sid.

                              -- 
                              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                              Senior Staff Specialist, Cricket Coach
                              Microsoft Windows Free Zone - Linux used for all Computing Tasks
                              
                            • Sid Boyce
                              I have not seen webSDR server but I would think usbsoftrock still has access to the si570 like it does when ghpsdr3-alex is running. With usbsoftrock you can
                              Message 14 of 20 , Jun 19, 2013
                              • 0 Attachment
                                I have not seen webSDR server but I would think usbsoftrock still has access to the si570 like it does when ghpsdr3-alex is running. With usbsoftrock you can control the si570 independently unless the webSDR server has an exclusive lock on the si570.
                                73 ... Sid.

                                On 20/06/13 01:30, Dave wrote:
                                 
                                Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                :) 

                                Dave


                                On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:

                                 

                                CFGSR is a .exe utility for Windows only.
                                usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                                73 ... Sid.

                                On 20/06/13 00:54, Dave wrote:
                                 
                                Hi Joe 

                                Is cfsgr a version for Ubuntu? 

                                And we're do I get the LCD kit? 

                                Thanks Joe! 

                                Dave


                                On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...>wrote:

                                 
                                Dave,
                                I run several softrocks using websdr
                                I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                Hope this helps
                                Joe
                                Ve1bwv

                                Sent from my iPhone

                                On 2013-06-19, at 2:13 PM, Dave <n1ohn@...>wrote:

                                 
                                Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                Is anyone actually running the WebSDR server end software in group that can help? 

                                Thanks again all :) 

                                Dave


                                On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...>wrote:

                                 

                                OK, sorry...

                                You should read the help about the websdr.cfg file
                                and configure as your Ubuntu sound configuration at first.
                                Sound system is a little bit confusing but you can do it.

                                ja9mat Hidehiko.

                                --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                                >
                                > Hi
                                >
                                > Thanks I have the software
                                >
                                > Dave
                                >
                                >
                                > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                                >
                                > > Hi Dave,
                                > >
                                > > You should contact to the author of the Websdr by following site;
                                > >
                                > > http://www.websdr.org/
                                > >
                                > > The websdr software is special function program and you can get
                                > > software from him directly usong the e-mail.
                                > >
                                > > ja9mat hidehiko.
                                > >
                                > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                                > > >
                                > > > Hello all
                                > > >
                                > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                                > > >
                                > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                                > > >
                                > > > Thanks all
                                > > > Dave
                                > > >
                                > >
                                > >
                                >



                                -- 
                                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                Senior Staff Specialist, Cricket Coach
                                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                


                                -- 
                                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                Senior Staff Specialist, Cricket Coach
                                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                
                            • JOSEPH BASQUE
                              The Si570 Controller and Frequency Generator Kit #2 Attached is one of the kits I built http://www.qsl.net/k5bcq/Kits/Kits.html Great kits - i have built 3 of
                              Message 15 of 20 , Jun 19, 2013
                              The Si570 Controller and Frequency Generator Kit #2

                              Attached is one of the kits I built

                              http://www.qsl.net/k5bcq/Kits/Kits.html

                              Great kits - i have built 3 of them - very easy to put together.

                              If you use a dpdt switch - you can switch from usb mode to standalone control.
                              I just remove the usb chip and tap on to the pins i need.

                              Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                              and 2 wires for the band select control

                              The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                              Band select is automatically done if as you select the band.


                              Sid Boyce has some great info :
                              http://www.qsl.net/k5bcq/Kits/G3VBV.html





                              Websdr:

                              Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                              The bandwidth selected is dependent on the ability of your sound card..
                              cheap audio cards - provide about 48k bw
                              good audios cards - 9600 to 128k.

                              Joe
                              Ve1bwv

                              From: Dave <n1ohn@...>
                              To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                              Cc: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                              Sent: Wednesday, June 19, 2013 9:30:10 PM
                              Subject: Re: [softrock40] Re: RX II with WebSDR help

                               
                              Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                              :) 

                              Dave


                              On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:

                               
                              CFGSR is a .exe utility for Windows only.
                              usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                              73 ... Sid.

                              On 20/06/13 00:54, Dave wrote:
                               
                              Hi Joe 

                              Is cfsgr a version for Ubuntu? 

                              And we're do I get the LCD kit? 

                              Thanks Joe! 

                              Dave


                              On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                               
                              Dave,
                              I run several softrocks using websdr
                              I use a pc 3 bands and a raspberry pi for 17 Mtrs

                              1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                              2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                              3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                              4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                              Hope this helps
                              Joe
                              Ve1bwv

                              Sent from my iPhone

                              On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                               
                              Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                              Is anyone actually running the WebSDR server end software in group that can help? 

                              Thanks again all :) 

                              Dave


                              On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                               
                              OK, sorry...

                              You should read the help about the websdr.cfg file
                              and configure as your Ubuntu sound configuration at first.
                              Sound system is a little bit confusing but you can do it.

                              ja9mat Hidehiko.

                              --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                              >
                              > Hi
                              >
                              > Thanks I have the software
                              >
                              > Dave
                              >
                              >
                              > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                              >
                              > > Hi Dave,
                              > >
                              > > You should contact to the author of the Websdr by following site;
                              > >
                              > > http://www.websdr.org/
                              > >
                              > > The websdr software is special function program and you can get
                              > > software from him directly usong the e-mail.
                              > >
                              > > ja9mat hidehiko.
                              > >
                              > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                              > > >
                              > > > Hello all
                              > > >
                              > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                              > > >
                              > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                              > > >
                              > > > Thanks all
                              > > > Dave
                              > > >
                              > >
                              > >
                              >



                              -- 
                              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                              Senior Staff Specialist, Cricket Coach
                              Microsoft Windows Free Zone - Linux used for all Computing Tasks
                              


                            • Ron Hayes
                              What rotary optical encoder is used for the Si570? Any info on this would be helpful. ________________________________ From: JOSEPH BASQUE
                              Message 16 of 20 , Jun 19, 2013
                              • 0 Attachment
                                What rotary optical encoder is used for the Si570? Any info on this would be helpful.

                                From: JOSEPH BASQUE <jbasque@...>
                                To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                Sent: Wednesday, June 19, 2013 8:01 PM
                                Subject: Re: [softrock40] Re: RX II with WebSDR help [1 Attachment]
                                 
                                The Si570 Controller and Frequency Generator Kit #2

                                Attached is one of the kits I built

                                http://www.qsl.net/k5bcq/Kits/Kits.html

                                Great kits - i have built 3 of them - very easy to put together.

                                If you use a dpdt switch - you can switch from usb mode to standalone control.
                                I just remove the usb chip and tap on to the pins i need.

                                Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                and 2 wires for the band select control

                                The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                Band select is automatically done if as you select the band.


                                Sid Boyce has some great info :
                                http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                Websdr:

                                Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                The bandwidth selected is dependent on the ability of your sound card..
                                cheap audio cards - provide about 48k bw
                                good audios cards - 9600 to 128k.

                                Joe
                                Ve1bwv
                                From: Dave <n1ohn@...>
                                To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                Cc: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                Sent: Wednesday, June 19, 2013 9:30:10 PM
                                Subject: Re: [softrock40] Re: RX II with WebSDR help
                                 
                                Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                :)  Dave

                                On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:
                                 
                                CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc. 73 ... Sid. On 20/06/13 00:54, Dave wrote:
                                 
                                Hi Joe 

                                Is cfsgr a version for Ubuntu? 

                                And we're do I get the LCD kit? 

                                Thanks Joe!  Dave

                                On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:
                                 
                                Dave,
                                I run several softrocks using websdr
                                I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                Hope this helps
                                Joe
                                Ve1bwv
                                Sent from my iPhone
                                On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:
                                 
                                Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                Is anyone actually running the WebSDR server end software in group that can help? 

                                Thanks again all :)  Dave

                                On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:
                                 
                                OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit confusing but you can do it. ja9mat Hidehiko. --- In mailto:softrock40%40yahoogroups.com, Dave mailto:n1ohn@... wrote: > > Hi > > Thanks I have the software > > Dave > > > On Jun 19, 2013, at 5:55 AM, "Hide" mailto:qrper72@... wrote: > > > Hi Dave, > > > > You should contact to the author of the Websdr by following site; > > > > http://www.websdr.org/ > > > > The websdr software is special function program and you can get > > software from him directly usong the e-mail. > > > > ja9mat hidehiko. > > > > --- In mailto:softrock40%40yahoogroups.com, "David" <n1ohn@> wrote: > > > > > > Hello all > > > > > > I'm wondering if any one is using the WebSDR server software for Lunux. > > > > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II. > > > > > > Thanks all > > > Dave > > > > > > > >
                                -- 
                                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                Senior Staff Specialist, Cricket Coach
                                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                
                              • Sid Boyce
                                Bourn P/N: EM14COD-E24-L064S w/PB optical encoder from Mouser. I have also used The Oak Grigsby optical encoders without pushbutton and separate miniature
                                Message 17 of 20 , Jun 20, 2013
                                • 0 Attachment
                                  Bourn P/N: EM14COD-E24-L064S w/PB optical encoder from Mouser.
                                  I have also used The Oak Grigsby optical encoders without pushbutton and separate miniature momentary contact switches.

                                  I think Oak Grigsby was taken over by Bourn and their encoders now have Bourn partnumbers.
                                  73 ... Sid.
                                   
                                  On 20/06/13 04:29, Ron Hayes wrote:
                                   
                                  What rotary optical encoder is used for the Si570? Any info on this would be helpful.

                                  From: JOSEPH BASQUE <jbasque@...>
                                  To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                  Sent: Wednesday, June 19, 2013 8:01 PM
                                  Subject: Re: [softrock40] Re: RX II with WebSDR help [1 Attachment]
                                   
                                  The Si570 Controller and Frequency Generator Kit #2

                                  Attached is one of the kits I built

                                  http://www.qsl.net/k5bcq/Kits/Kits.html

                                  Great kits - i have built 3 of them - very easy to put together.

                                  If you use a dpdt switch - you can switch from usb mode to standalone control.
                                  I just remove the usb chip and tap on to the pins i need.

                                  Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                  and 2 wires for the band select control

                                  The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                  Band select is automatically done if as you select the band.


                                  Sid Boyce has some great info :
                                  http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                  Websdr:

                                  Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                  The bandwidth selected is dependent on the ability of your sound card..
                                  cheap audio cards - provide about 48k bw
                                  good audios cards - 9600 to 128k.

                                  Joe
                                  Ve1bwv
                                  From: Dave <n1ohn@...>
                                  To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                  Cc: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                  Sent: Wednesday, June 19, 2013 9:30:10 PM
                                  Subject: Re: [softrock40] Re: RX II with WebSDR help
                                   
                                  Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                  :)  Dave

                                  On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:
                                   
                                  CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc. 73 ... Sid. On 20/06/13 00:54, Dave wrote:
                                   
                                  Hi Joe 

                                  Is cfsgr a version for Ubuntu? 

                                  And we're do I get the LCD kit? 

                                  Thanks Joe!  Dave

                                  On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...>wrote:
                                   
                                  Dave,
                                  I run several softrocks using websdr
                                  I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                  1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                  2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                  3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                  4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                  Hope this helps
                                  Joe
                                  Ve1bwv
                                  Sent from my iPhone
                                  On 2013-06-19, at 2:13 PM, Dave <n1ohn@...>wrote:
                                   
                                  Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                  Is anyone actually running the WebSDR server end software in group that can help? 

                                  Thanks again all :)  Dave

                                  On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:
                                   
                                  OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit confusing but you can do it. ja9mat Hidehiko. --- In mailto:softrock40%40yahoogroups.com, Dave mailto:n1ohn@... wrote: > > Hi > > Thanks I have the software > > Dave > > > On Jun 19, 2013, at 5:55 AM, "Hide" mailto:qrper72@... wrote: > > > Hi Dave, > > > > You should contact to the author of the Websdr by following site; > > > > http://www.websdr.org/ > > > > The websdr software is special function program and you can get > > software from him directly usong the e-mail. > > > > ja9mat hidehiko. > > > > --- In mailto:softrock40%40yahoogroups.com, "David" <n1ohn@> wrote: > > > > > > Hello all > > > > > > I'm wondering if any one is using the WebSDR server software for Lunux. > > > > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II. > > > > > > Thanks all > > > Dave > > > > > > > >
                                  -- 
                                  Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                  Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                  Senior Staff Specialist, Cricket Coach
                                  Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                  


                                  -- 
                                  Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                  Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                  Senior Staff Specialist, Cricket Coach
                                  Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                  
                                • Ron Hayes
                                  Thank you on the encoder info. ________________________________ From: Sid Boyce To: softrock40@yahoogroups.com Sent: Thursday, June
                                  Message 18 of 20 , Jun 20, 2013
                                  • 0 Attachment
                                    Thank you on the encoder info.

                                    From: Sid Boyce <sboyce@...>
                                    To: softrock40@yahoogroups.com
                                    Sent: Thursday, June 20, 2013 4:36 AM
                                    Subject: Re: [softrock40] Re: RX II with WebSDR help
                                     
                                    Bourn P/N: EM14COD-E24-L064S w/PB optical encoder from Mouser. I have also used The Oak Grigsby optical encoders without pushbutton and separate miniature momentary contact switches. I think Oak Grigsby was taken over by Bourn and their encoders now have Bourn partnumbers. 73 ... Sid.  
                                    On 20/06/13 04:29, Ron Hayes wrote:
                                     
                                    What rotary optical encoder is used for the Si570? Any info on this would be helpful.

                                    From: JOSEPH BASQUE mailto:jbasque@...
                                    To: mailto:softrock40@yahoogroups.com mailto:softrock40@yahoogroups.com
                                    Sent: Wednesday, June 19, 2013 8:01 PM
                                    Subject: Re: [softrock40] Re: RX II with WebSDR help [1 Attachment]
                                     
                                    The Si570 Controller and Frequency Generator Kit #2

                                    Attached is one of the kits I built

                                    http://www.qsl.net/k5bcq/Kits/Kits.html

                                    Great kits - i have built 3 of them - very easy to put together.

                                    If you use a dpdt switch - you can switch from usb mode to standalone control.
                                    I just remove the usb chip and tap on to the pins i need.

                                    Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                    and 2 wires for the band select control

                                    The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                    Band select is automatically done if as you select the band.


                                    Sid Boyce has some great info :
                                    http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                    Websdr:

                                    Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                    The bandwidth selected is dependent on the ability of your sound card..
                                    cheap audio cards - provide about 48k bw
                                    good audios cards - 9600 to 128k.

                                    Joe
                                    Ve1bwv
                                    From: Dave mailto:n1ohn@...
                                    To: mailto:softrock40@yahoogroups.com mailto:softrock40@yahoogroups.com
                                    Cc: mailto:softrock40@yahoogroups.com mailto:softrock40@yahoogroups.com
                                    Sent: Wednesday, June 19, 2013 9:30:10 PM
                                    Subject: Re: [softrock40] Re: RX II with WebSDR help
                                     
                                    Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                    :)  Dave

                                    On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:
                                     
                                    CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc. 73 ... Sid. On 20/06/13 00:54, Dave wrote:
                                     
                                    Hi Joe 

                                    Is cfsgr a version for Ubuntu? 

                                    And we're do I get the LCD kit? 

                                    Thanks Joe!  Dave

                                    On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...>wrote:
                                     
                                    Dave,
                                    I run several softrocks using websdr
                                    I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                    1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                    2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                    3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                    4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                    Hope this helps
                                    Joe
                                    Ve1bwv
                                    Sent from my iPhone
                                    On 2013-06-19, at 2:13 PM, Dave <n1ohn@...>wrote:
                                     
                                    Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                    Is anyone actually running the WebSDR server end software in group that can help? 

                                    Thanks again all :)  Dave

                                    On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:
                                     
                                    OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit confusing but you can do it. ja9mat Hidehiko. --- In mailto:softrock40%40yahoogroups.com, Dave mailto:n1ohn@... wrote: > > Hi > > Thanks I have the software > > Dave > > > On Jun 19, 2013, at 5:55 AM, "Hide" mailto:qrper72@... wrote: > > > Hi Dave, > > > > You should contact to the author of the Websdr by following site; > > > > http://www.websdr.org/ > > > > The websdr software is special function program and you can get > > software from him directly usong the e-mail. > > > > ja9mat hidehiko. > > > > --- In mailto:softrock40%40yahoogroups.com, "David" <n1ohn@> wrote: > > > > > > Hello all > > > > > > I'm wondering if any one is using the WebSDR server software for Lunux. > > > > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II. > > > > > > Thanks all > > > Dave > > > > > > > >
                                    -- 
                                    Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                    Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                    Senior Staff Specialist, Cricket Coach
                                    Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                    
                                    -- 
                                    Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                    Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                    Senior Staff Specialist, Cricket Coach
                                    Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                    
                                  • Alan
                                    ... Subject: Re: [softrock40] Re: RX II with WebSDR help Here is one of my Kees/John generators with a home-brew encoder and LF output.
                                    Message 19 of 20 , Jun 20, 2013
                                    • 0 Attachment
                                      ----- Original Message -----
                                      Subject: Re: [softrock40] Re: RX II with WebSDR help



                                      Here is one of my Kees/John generators with a home-brew encoder and LF output.
                                      <http://homepages.wightcable.net/~g4zfq/K-J-Controller.htm>


                                      73 Alan G4ZFQ
                                    • Your message has been successfully submitted and would be delivered to recipients shortly.