Loading ...
Sorry, an error occurred while loading the content.

RX II with WebSDR help

Expand Messages
  • David
    Hello all I m wondering if any one is using the WebSDR server software for Lunux. I m new to Ubuntu and have installed the WebSDR server software and the
    Message 1 of 20 , Jun 18, 2013
    • 0 Attachment
      Hello all

      I'm wondering if any one is using the WebSDR server software for Lunux.

      I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.

      Thanks all
      Dave
    • Sid Boyce
      I don t know of any way of putting a softrock on the net with webSDR using Linux. Have a look at http://napan.ca/ghpsdr3/index.php/Main_Page Check some of the
      Message 2 of 20 , Jun 18, 2013
      • 0 Attachment
        I don't know of any way of putting a softrock  on the net with webSDR using Linux.

        Have a look at http://napan.ca/ghpsdr3/index.php/Main_Page
        Check some of the URL's to see who is online and where.
        http://qtradio.napan.ca/qtradio/qtradio.pl
        http://www.montefusco.com/ghpsdr3

        Access to servers is via QtRadio.

        I use ghpsdr3-alex to put Softrock, UHFSDR, rtl-sdr, HiQSDQ and openHPSDR Hermes online using it.
        There is also a java app on Google Play to make online servers available using glSDR on an Android phone.
        The first connection or the owner who can force master. Master can tune, slaves can only listen to where master is tuned.

        If you go to a RXTX, TX is also supported and users with a login ID and password on any server can TX.
        73 ... Sid.

        On 19/06/13 00:49, David wrote:
         

        Hello all

        I'm wondering if any one is using the WebSDR server software for Lunux.

        I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.

        Thanks all
        Dave



        -- 
        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
        Senior Staff Specialist, Cricket Coach
        Microsoft Windows Free Zone - Linux used for all Computing Tasks
        
      • Hide
        Hi Dave, You should contact to the author of the Websdr by following site; http://www.websdr.org/ The websdr software is special function program and you can
        Message 3 of 20 , Jun 19, 2013
        • 0 Attachment
          Hi Dave,

          You should contact to the author of the Websdr by following site;

          http://www.websdr.org/

          The websdr software is special function program and you can get
          software from him directly usong the e-mail.

          ja9mat hidehiko.


          --- In softrock40@yahoogroups.com, "David" <n1ohn@...> wrote:
          >
          > Hello all
          >
          > I'm wondering if any one is using the WebSDR server software for Lunux.
          >
          > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
          >
          > Thanks all
          > Dave
          >
        • Dave
          Hi Thanks I have the software Dave
          Message 4 of 20 , Jun 19, 2013
          • 0 Attachment
            Hi 

            Thanks I have the software 

            Dave


            On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:

             

            Hi Dave,

            You should contact to the author of the Websdr by following site;

            http://www.websdr.org/

            The websdr software is special function program and you can get
            software from him directly usong the e-mail.

            ja9mat hidehiko.

            --- In softrock40@yahoogroups.com, "David" <n1ohn@...> wrote:
            >
            > Hello all
            >
            > I'm wondering if any one is using the WebSDR server software for Lunux.
            >
            > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
            >
            > Thanks all
            > Dave
            >

          • Hide
            OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit
            Message 5 of 20 , Jun 19, 2013
            • 0 Attachment
              OK, sorry...

              You should read the help about the websdr.cfg file
              and configure as your Ubuntu sound configuration at first.
              Sound system is a little bit confusing but you can do it.

              ja9mat Hidehiko.

              --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
              >
              > Hi
              >
              > Thanks I have the software
              >
              > Dave
              >
              >
              > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
              >
              > > Hi Dave,
              > >
              > > You should contact to the author of the Websdr by following site;
              > >
              > > http://www.websdr.org/
              > >
              > > The websdr software is special function program and you can get
              > > software from him directly usong the e-mail.
              > >
              > > ja9mat hidehiko.
              > >
              > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
              > > >
              > > > Hello all
              > > >
              > > > I'm wondering if any one is using the WebSDR server software for Lunux.
              > > >
              > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
              > > >
              > > > Thanks all
              > > > Dave
              > > >
              > >
              > >
              >
            • Dave
              Thanks I did that many times. not the sound that s the big problem it will not control the unit. Is anyone actually running the WebSDR server end software in
              Message 6 of 20 , Jun 19, 2013
              • 0 Attachment
                Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                Is anyone actually running the WebSDR server end software in group that can help? 

                Thanks again all :) 

                Dave


                On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                 

                OK, sorry...

                You should read the help about the websdr.cfg file
                and configure as your Ubuntu sound configuration at first.
                Sound system is a little bit confusing but you can do it.

                ja9mat Hidehiko.

                --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                >
                > Hi
                >
                > Thanks I have the software
                >
                > Dave
                >
                >
                > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                >
                > > Hi Dave,
                > >
                > > You should contact to the author of the Websdr by following site;
                > >
                > > http://www.websdr.org/
                > >
                > > The websdr software is special function program and you can get
                > > software from him directly usong the e-mail.
                > >
                > > ja9mat hidehiko.
                > >
                > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                > > >
                > > > Hello all
                > > >
                > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                > > >
                > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                > > >
                > > > Thanks all
                > > > Dave
                > > >
                > >
                > >
                >

              • Joe Basque
                Dave, I run several softrocks using websdr I use a pc 3 bands and a raspberry pi for 17 Mtrs 1. You can not control the frequency of the sdr with websdr. USB
                Message 7 of 20 , Jun 19, 2013
                • 0 Attachment
                  Dave,
                  I run several softrocks using websdr
                  I use a pc 3 bands and a raspberry pi for 17 Mtrs

                  1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                  2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                  3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                  4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                  Hope this helps
                  Joe
                  Ve1bwv

                  Sent from my iPhone

                  On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                   

                  Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                  Is anyone actually running the WebSDR server end software in group that can help? 

                  Thanks again all :) 

                  Dave


                  On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                   

                  OK, sorry...

                  You should read the help about the websdr.cfg file
                  and configure as your Ubuntu sound configuration at first.
                  Sound system is a little bit confusing but you can do it.

                  ja9mat Hidehiko.

                  --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                  >
                  > Hi
                  >
                  > Thanks I have the software
                  >
                  > Dave
                  >
                  >
                  > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                  >
                  > > Hi Dave,
                  > >
                  > > You should contact to the author of the Websdr by following site;
                  > >
                  > > http://www.websdr.org/
                  > >
                  > > The websdr software is special function program and you can get
                  > > software from him directly usong the e-mail.
                  > >
                  > > ja9mat hidehiko.
                  > >
                  > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                  > > >
                  > > > Hello all
                  > > >
                  > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                  > > >
                  > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                  > > >
                  > > > Thanks all
                  > > > Dave
                  > > >
                  > >
                  > >
                  >

                • David.Lopez
                  Is there something similar to WebSDR where it can transmit and be used as a transceiver? I am sure there will need to be something for authentication of FCC
                  Message 8 of 20 , Jun 19, 2013
                  • 0 Attachment
                    Is there something similar to WebSDR where it can transmit and be used as a transceiver?  I am sure there will need to be something for authentication of FCC license and band privileges.  This can help people that don't have a band capability due to antenna restrictions or the the funds to buy a new radio. This is a great idea whoever came up with this.

                    N6RI
                  • JOSEPH BASQUE
                    Websdr is the only software which allows simultaneous tuning of the rx by many many users, but no TX functions. RX and TX GLSDR for android as a client and
                    Message 9 of 20 , Jun 19, 2013
                    • 0 Attachment
                      Websdr is the only software which allows simultaneous tuning of the rx by many many users, but no TX functions.


                      RX and TX

                      GLSDR for android as a client and linux software server

                      Info here:

                      Ve1bwv
                      Joe

                      From: David.Lopez <brewgod23@...>
                      To: softrock40@yahoogroups.com
                      Sent: Wednesday, June 19, 2013 7:37:48 PM
                      Subject: [softrock40] Re: RX II with WebSDR help

                       
                      Is there something similar to WebSDR where it can transmit and be used as a transceiver?  I am sure there will need to be something for authentication of FCC license and band privileges.  This can help people that don't have a band capability due to antenna restrictions or the the funds to buy a new radio. This is a great idea whoever came up with this.

                      N6RI


                    • Dave
                      Hi Joe Is cfsgr a version for Ubuntu? And we re do I get the LCD kit? Thanks Joe! Dave
                      Message 10 of 20 , Jun 19, 2013
                      • 0 Attachment
                        Hi Joe 

                        Is cfsgr a version for Ubuntu? 

                        And we're do I get the LCD kit? 

                        Thanks Joe! 

                        Dave


                        On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                         

                        Dave,
                        I run several softrocks using websdr
                        I use a pc 3 bands and a raspberry pi for 17 Mtrs

                        1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                        2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                        3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                        4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                        Hope this helps
                        Joe
                        Ve1bwv

                        Sent from my iPhone

                        On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                         

                        Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                        Is anyone actually running the WebSDR server end software in group that can help? 

                        Thanks again all :) 

                        Dave


                        On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                         

                        OK, sorry...

                        You should read the help about the websdr.cfg file
                        and configure as your Ubuntu sound configuration at first.
                        Sound system is a little bit confusing but you can do it.

                        ja9mat Hidehiko.

                        --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                        >
                        > Hi
                        >
                        > Thanks I have the software
                        >
                        > Dave
                        >
                        >
                        > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                        >
                        > > Hi Dave,
                        > >
                        > > You should contact to the author of the Websdr by following site;
                        > >
                        > > http://www.websdr.org/
                        > >
                        > > The websdr software is special function program and you can get
                        > > software from him directly usong the e-mail.
                        > >
                        > > ja9mat hidehiko.
                        > >
                        > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                        > > >
                        > > > Hello all
                        > > >
                        > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                        > > >
                        > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                        > > >
                        > > > Thanks all
                        > > > Dave
                        > > >
                        > >
                        > >
                        >

                      • Sid Boyce
                        CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup
                        Message 11 of 20 , Jun 19, 2013
                        • 0 Attachment
                          CFGSR is a .exe utility for Windows only.
                          usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                          73 ... Sid.

                          On 20/06/13 00:54, Dave wrote:
                           
                          Hi Joe 

                          Is cfsgr a version for Ubuntu? 

                          And we're do I get the LCD kit? 

                          Thanks Joe! 

                          Dave


                          On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                           
                          Dave,
                          I run several softrocks using websdr
                          I use a pc 3 bands and a raspberry pi for 17 Mtrs

                          1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                          2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                          3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                          4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                          Hope this helps
                          Joe
                          Ve1bwv

                          Sent from my iPhone

                          On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                           
                          Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                          Is anyone actually running the WebSDR server end software in group that can help? 

                          Thanks again all :) 

                          Dave


                          On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                           

                          OK, sorry...

                          You should read the help about the websdr.cfg file
                          and configure as your Ubuntu sound configuration at first.
                          Sound system is a little bit confusing but you can do it.

                          ja9mat Hidehiko.

                          --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                          >
                          > Hi
                          >
                          > Thanks I have the software
                          >
                          > Dave
                          >
                          >
                          > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                          >
                          > > Hi Dave,
                          > >
                          > > You should contact to the author of the Websdr by following site;
                          > >
                          > > http://www.websdr.org/
                          > >
                          > > The websdr software is special function program and you can get
                          > > software from him directly usong the e-mail.
                          > >
                          > > ja9mat hidehiko.
                          > >
                          > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                          > > >
                          > > > Hello all
                          > > >
                          > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                          > > >
                          > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                          > > >
                          > > > Thanks all
                          > > > Dave
                          > > >
                          > >
                          > >
                          >



                          -- 
                          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                          Senior Staff Specialist, Cricket Coach
                          Microsoft Windows Free Zone - Linux used for all Computing Tasks
                          
                        • Bill Cromwell
                          ... Hi, I have been running *ALL* of the ham type software in Linux under WINE. Some say WINE means Windows emulator, but other say WINE means WINE is not an
                          Message 12 of 20 , Jun 19, 2013
                          • 0 Attachment
                            On 06/19/2013 08:15 PM, Sid Boyce wrote:
                            >
                            > CFGSR is a .exe utility for Windows only.
                            > usbsoftrock which you have installed provides the functionality that
                            > allows you to calibrate the si570, set startup frequency if needed,
                            > set RX frequency, etc.
                            > 73 ... Sid.
                            >

                            Hi,

                            I have been running *ALL* of the ham type software in Linux under WINE.
                            Some say WINE means Windows emulator, but other say WINE means "WINE is
                            not an emulator. WINE is an environment that supports windows programs
                            under a Linux OS. Depending on a lot of factors that may not all be
                            under your control you may find some applications that fail in WINE. If
                            it's free, give it a try. I'm going to.

                            73,

                            Bill KU8H
                          • Dave
                            Yes that what I thought. So how do we control the unit when it s in server mode with WebSDR? ... Dave
                            Message 13 of 20 , Jun 19, 2013
                            • 0 Attachment
                              Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                              :) 

                              Dave


                              On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:

                               

                              CFGSR is a .exe utility for Windows only.
                              usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                              73 ... Sid.

                              On 20/06/13 00:54, Dave wrote:
                               
                              Hi Joe 

                              Is cfsgr a version for Ubuntu? 

                              And we're do I get the LCD kit? 

                              Thanks Joe! 

                              Dave


                              On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                               
                              Dave,
                              I run several softrocks using websdr
                              I use a pc 3 bands and a raspberry pi for 17 Mtrs

                              1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                              2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                              3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                              4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                              Hope this helps
                              Joe
                              Ve1bwv

                              Sent from my iPhone

                              On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                               
                              Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                              Is anyone actually running the WebSDR server end software in group that can help? 

                              Thanks again all :) 

                              Dave


                              On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                               

                              OK, sorry...

                              You should read the help about the websdr.cfg file
                              and configure as your Ubuntu sound configuration at first.
                              Sound system is a little bit confusing but you can do it.

                              ja9mat Hidehiko.

                              --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                              >
                              > Hi
                              >
                              > Thanks I have the software
                              >
                              > Dave
                              >
                              >
                              > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                              >
                              > > Hi Dave,
                              > >
                              > > You should contact to the author of the Websdr by following site;
                              > >
                              > > http://www.websdr.org/
                              > >
                              > > The websdr software is special function program and you can get
                              > > software from him directly usong the e-mail.
                              > >
                              > > ja9mat hidehiko.
                              > >
                              > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                              > > >
                              > > > Hello all
                              > > >
                              > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                              > > >
                              > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                              > > >
                              > > > Thanks all
                              > > > Dave
                              > > >
                              > >
                              > >
                              >



                              -- 
                              Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                              Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                              Senior Staff Specialist, Cricket Coach
                              Microsoft Windows Free Zone - Linux used for all Computing Tasks
                              

                            • Sid Boyce
                              ... I tried PSDR, Rocky and Kisskonsole under Crossover Office. PSDR recently was as slow as treacle painting the buttons so it was not usable. Rocky couldn t
                              Message 14 of 20 , Jun 19, 2013
                              • 0 Attachment
                                On 20/06/13 01:28, Bill Cromwell wrote:
                                 

                                On 06/19/2013 08:15 PM, Sid Boyce wrote:
                                >
                                > CFGSR is a .exe utility for Windows only.
                                > usbsoftrock which you have installed provides the functionality that
                                > allows you to calibrate the si570, set startup frequency if needed,
                                > set RX frequency, etc.
                                > 73 ... Sid.
                                >

                                Hi,

                                I have been running *ALL* of the ham type software in Linux under WINE.
                                Some say WINE means Windows emulator, but other say WINE means "WINE is
                                not an emulator. WINE is an environment that supports windows programs
                                under a Linux OS. Depending on a lot of factors that may not all be
                                under your control you may find some applications that fail in WINE. If
                                it's free, give it a try. I'm going to.

                                73,

                                Bill KU8H

                                I tried PSDR, Rocky and Kisskonsole under Crossover Office.
                                PSDR recently was as slow as treacle painting the buttons so it was not usable.

                                Rocky couldn't see the sound cards - that was some years ago. WMP used to work some years before that but it didn't when I tried Rocky.

                                Kissconsole finds Hermes, then it fails looking for Alex, there is no Alex fitted to Hermes.

                                I have a new version of Crossover Office I need to try.

                                All the same results above applied to wine. Crossover Office supports a lot more than wine and it's enhancements are fed back into wine on expiry of any NDA's Codeweavers has to honour.
                                73 ... Sid.

                                -- 
                                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                Senior Staff Specialist, Cricket Coach
                                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                
                              • Sid Boyce
                                I have not seen webSDR server but I would think usbsoftrock still has access to the si570 like it does when ghpsdr3-alex is running. With usbsoftrock you can
                                Message 15 of 20 , Jun 19, 2013
                                • 0 Attachment
                                  I have not seen webSDR server but I would think usbsoftrock still has access to the si570 like it does when ghpsdr3-alex is running. With usbsoftrock you can control the si570 independently unless the webSDR server has an exclusive lock on the si570.
                                  73 ... Sid.

                                  On 20/06/13 01:30, Dave wrote:
                                   
                                  Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                  :) 

                                  Dave


                                  On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:

                                   

                                  CFGSR is a .exe utility for Windows only.
                                  usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                                  73 ... Sid.

                                  On 20/06/13 00:54, Dave wrote:
                                   
                                  Hi Joe 

                                  Is cfsgr a version for Ubuntu? 

                                  And we're do I get the LCD kit? 

                                  Thanks Joe! 

                                  Dave


                                  On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...>wrote:

                                   
                                  Dave,
                                  I run several softrocks using websdr
                                  I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                  1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                  2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                  3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                  4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                  Hope this helps
                                  Joe
                                  Ve1bwv

                                  Sent from my iPhone

                                  On 2013-06-19, at 2:13 PM, Dave <n1ohn@...>wrote:

                                   
                                  Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                  Is anyone actually running the WebSDR server end software in group that can help? 

                                  Thanks again all :) 

                                  Dave


                                  On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...>wrote:

                                   

                                  OK, sorry...

                                  You should read the help about the websdr.cfg file
                                  and configure as your Ubuntu sound configuration at first.
                                  Sound system is a little bit confusing but you can do it.

                                  ja9mat Hidehiko.

                                  --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                                  >
                                  > Hi
                                  >
                                  > Thanks I have the software
                                  >
                                  > Dave
                                  >
                                  >
                                  > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                                  >
                                  > > Hi Dave,
                                  > >
                                  > > You should contact to the author of the Websdr by following site;
                                  > >
                                  > > http://www.websdr.org/
                                  > >
                                  > > The websdr software is special function program and you can get
                                  > > software from him directly usong the e-mail.
                                  > >
                                  > > ja9mat hidehiko.
                                  > >
                                  > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                                  > > >
                                  > > > Hello all
                                  > > >
                                  > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                                  > > >
                                  > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                                  > > >
                                  > > > Thanks all
                                  > > > Dave
                                  > > >
                                  > >
                                  > >
                                  >



                                  -- 
                                  Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                  Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                  Senior Staff Specialist, Cricket Coach
                                  Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                  


                                  -- 
                                  Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                  Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                  Senior Staff Specialist, Cricket Coach
                                  Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                  
                              • JOSEPH BASQUE
                                The Si570 Controller and Frequency Generator Kit #2 Attached is one of the kits I built http://www.qsl.net/k5bcq/Kits/Kits.html Great kits - i have built 3 of
                                Message 16 of 20 , Jun 19, 2013
                                The Si570 Controller and Frequency Generator Kit #2

                                Attached is one of the kits I built

                                http://www.qsl.net/k5bcq/Kits/Kits.html

                                Great kits - i have built 3 of them - very easy to put together.

                                If you use a dpdt switch - you can switch from usb mode to standalone control.
                                I just remove the usb chip and tap on to the pins i need.

                                Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                and 2 wires for the band select control

                                The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                Band select is automatically done if as you select the band.


                                Sid Boyce has some great info :
                                http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                Websdr:

                                Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                The bandwidth selected is dependent on the ability of your sound card..
                                cheap audio cards - provide about 48k bw
                                good audios cards - 9600 to 128k.

                                Joe
                                Ve1bwv

                                From: Dave <n1ohn@...>
                                To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                Cc: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                Sent: Wednesday, June 19, 2013 9:30:10 PM
                                Subject: Re: [softrock40] Re: RX II with WebSDR help

                                 
                                Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                :) 

                                Dave


                                On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:

                                 
                                CFGSR is a .exe utility for Windows only.
                                usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc.
                                73 ... Sid.

                                On 20/06/13 00:54, Dave wrote:
                                 
                                Hi Joe 

                                Is cfsgr a version for Ubuntu? 

                                And we're do I get the LCD kit? 

                                Thanks Joe! 

                                Dave


                                On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:

                                 
                                Dave,
                                I run several softrocks using websdr
                                I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                Hope this helps
                                Joe
                                Ve1bwv

                                Sent from my iPhone

                                On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:

                                 
                                Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                Is anyone actually running the WebSDR server end software in group that can help? 

                                Thanks again all :) 

                                Dave


                                On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:

                                 
                                OK, sorry...

                                You should read the help about the websdr.cfg file
                                and configure as your Ubuntu sound configuration at first.
                                Sound system is a little bit confusing but you can do it.

                                ja9mat Hidehiko.

                                --- In softrock40@yahoogroups.com, Dave <n1ohn@...> wrote:
                                >
                                > Hi
                                >
                                > Thanks I have the software
                                >
                                > Dave
                                >
                                >
                                > On Jun 19, 2013, at 5:55 AM, "Hide" <qrper72@...> wrote:
                                >
                                > > Hi Dave,
                                > >
                                > > You should contact to the author of the Websdr by following site;
                                > >
                                > > http://www.websdr.org/
                                > >
                                > > The websdr software is special function program and you can get
                                > > software from him directly usong the e-mail.
                                > >
                                > > ja9mat hidehiko.
                                > >
                                > > --- In softrock40@yahoogroups.com, "David" <n1ohn@> wrote:
                                > > >
                                > > > Hello all
                                > > >
                                > > > I'm wondering if any one is using the WebSDR server software for Lunux.
                                > > >
                                > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II.
                                > > >
                                > > > Thanks all
                                > > > Dave
                                > > >
                                > >
                                > >
                                >



                                -- 
                                Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                Senior Staff Specialist, Cricket Coach
                                Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                


                              • Ron Hayes
                                What rotary optical encoder is used for the Si570? Any info on this would be helpful. ________________________________ From: JOSEPH BASQUE
                                Message 17 of 20 , Jun 19, 2013
                                • 0 Attachment
                                  What rotary optical encoder is used for the Si570? Any info on this would be helpful.

                                  From: JOSEPH BASQUE <jbasque@...>
                                  To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                  Sent: Wednesday, June 19, 2013 8:01 PM
                                  Subject: Re: [softrock40] Re: RX II with WebSDR help [1 Attachment]
                                   
                                  The Si570 Controller and Frequency Generator Kit #2

                                  Attached is one of the kits I built

                                  http://www.qsl.net/k5bcq/Kits/Kits.html

                                  Great kits - i have built 3 of them - very easy to put together.

                                  If you use a dpdt switch - you can switch from usb mode to standalone control.
                                  I just remove the usb chip and tap on to the pins i need.

                                  Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                  and 2 wires for the band select control

                                  The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                  Band select is automatically done if as you select the band.


                                  Sid Boyce has some great info :
                                  http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                  Websdr:

                                  Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                  The bandwidth selected is dependent on the ability of your sound card..
                                  cheap audio cards - provide about 48k bw
                                  good audios cards - 9600 to 128k.

                                  Joe
                                  Ve1bwv
                                  From: Dave <n1ohn@...>
                                  To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                  Cc: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                  Sent: Wednesday, June 19, 2013 9:30:10 PM
                                  Subject: Re: [softrock40] Re: RX II with WebSDR help
                                   
                                  Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                  :)  Dave

                                  On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:
                                   
                                  CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc. 73 ... Sid. On 20/06/13 00:54, Dave wrote:
                                   
                                  Hi Joe 

                                  Is cfsgr a version for Ubuntu? 

                                  And we're do I get the LCD kit? 

                                  Thanks Joe!  Dave

                                  On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...> wrote:
                                   
                                  Dave,
                                  I run several softrocks using websdr
                                  I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                  1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                  2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                  3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                  4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                  Hope this helps
                                  Joe
                                  Ve1bwv
                                  Sent from my iPhone
                                  On 2013-06-19, at 2:13 PM, Dave <n1ohn@...> wrote:
                                   
                                  Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                  Is anyone actually running the WebSDR server end software in group that can help? 

                                  Thanks again all :)  Dave

                                  On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:
                                   
                                  OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit confusing but you can do it. ja9mat Hidehiko. --- In mailto:softrock40%40yahoogroups.com, Dave mailto:n1ohn@... wrote: > > Hi > > Thanks I have the software > > Dave > > > On Jun 19, 2013, at 5:55 AM, "Hide" mailto:qrper72@... wrote: > > > Hi Dave, > > > > You should contact to the author of the Websdr by following site; > > > > http://www.websdr.org/ > > > > The websdr software is special function program and you can get > > software from him directly usong the e-mail. > > > > ja9mat hidehiko. > > > > --- In mailto:softrock40%40yahoogroups.com, "David" <n1ohn@> wrote: > > > > > > Hello all > > > > > > I'm wondering if any one is using the WebSDR server software for Lunux. > > > > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II. > > > > > > Thanks all > > > Dave > > > > > > > >
                                  -- 
                                  Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                  Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                  Senior Staff Specialist, Cricket Coach
                                  Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                  
                                • Sid Boyce
                                  Bourn P/N: EM14COD-E24-L064S w/PB optical encoder from Mouser. I have also used The Oak Grigsby optical encoders without pushbutton and separate miniature
                                  Message 18 of 20 , Jun 20, 2013
                                  • 0 Attachment
                                    Bourn P/N: EM14COD-E24-L064S w/PB optical encoder from Mouser.
                                    I have also used The Oak Grigsby optical encoders without pushbutton and separate miniature momentary contact switches.

                                    I think Oak Grigsby was taken over by Bourn and their encoders now have Bourn partnumbers.
                                    73 ... Sid.
                                     
                                    On 20/06/13 04:29, Ron Hayes wrote:
                                     
                                    What rotary optical encoder is used for the Si570? Any info on this would be helpful.

                                    From: JOSEPH BASQUE <jbasque@...>
                                    To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                    Sent: Wednesday, June 19, 2013 8:01 PM
                                    Subject: Re: [softrock40] Re: RX II with WebSDR help [1 Attachment]
                                     
                                    The Si570 Controller and Frequency Generator Kit #2

                                    Attached is one of the kits I built

                                    http://www.qsl.net/k5bcq/Kits/Kits.html

                                    Great kits - i have built 3 of them - very easy to put together.

                                    If you use a dpdt switch - you can switch from usb mode to standalone control.
                                    I just remove the usb chip and tap on to the pins i need.

                                    Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                    and 2 wires for the band select control

                                    The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                    Band select is automatically done if as you select the band.


                                    Sid Boyce has some great info :
                                    http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                    Websdr:

                                    Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                    The bandwidth selected is dependent on the ability of your sound card..
                                    cheap audio cards - provide about 48k bw
                                    good audios cards - 9600 to 128k.

                                    Joe
                                    Ve1bwv
                                    From: Dave <n1ohn@...>
                                    To: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                    Cc: "softrock40@yahoogroups.com" <softrock40@yahoogroups.com>
                                    Sent: Wednesday, June 19, 2013 9:30:10 PM
                                    Subject: Re: [softrock40] Re: RX II with WebSDR help
                                     
                                    Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                    :)  Dave

                                    On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:
                                     
                                    CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc. 73 ... Sid. On 20/06/13 00:54, Dave wrote:
                                     
                                    Hi Joe 

                                    Is cfsgr a version for Ubuntu? 

                                    And we're do I get the LCD kit? 

                                    Thanks Joe!  Dave

                                    On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...>wrote:
                                     
                                    Dave,
                                    I run several softrocks using websdr
                                    I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                    1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                    2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                    3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                    4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                    Hope this helps
                                    Joe
                                    Ve1bwv
                                    Sent from my iPhone
                                    On 2013-06-19, at 2:13 PM, Dave <n1ohn@...>wrote:
                                     
                                    Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                    Is anyone actually running the WebSDR server end software in group that can help? 

                                    Thanks again all :)  Dave

                                    On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:
                                     
                                    OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit confusing but you can do it. ja9mat Hidehiko. --- In mailto:softrock40%40yahoogroups.com, Dave mailto:n1ohn@... wrote: > > Hi > > Thanks I have the software > > Dave > > > On Jun 19, 2013, at 5:55 AM, "Hide" mailto:qrper72@... wrote: > > > Hi Dave, > > > > You should contact to the author of the Websdr by following site; > > > > http://www.websdr.org/ > > > > The websdr software is special function program and you can get > > software from him directly usong the e-mail. > > > > ja9mat hidehiko. > > > > --- In mailto:softrock40%40yahoogroups.com, "David" <n1ohn@> wrote: > > > > > > Hello all > > > > > > I'm wondering if any one is using the WebSDR server software for Lunux. > > > > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II. > > > > > > Thanks all > > > Dave > > > > > > > >
                                    -- 
                                    Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                    Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                    Senior Staff Specialist, Cricket Coach
                                    Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                    


                                    -- 
                                    Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                    Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                    Senior Staff Specialist, Cricket Coach
                                    Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                    
                                  • Ron Hayes
                                    Thank you on the encoder info. ________________________________ From: Sid Boyce To: softrock40@yahoogroups.com Sent: Thursday, June
                                    Message 19 of 20 , Jun 20, 2013
                                    • 0 Attachment
                                      Thank you on the encoder info.

                                      From: Sid Boyce <sboyce@...>
                                      To: softrock40@yahoogroups.com
                                      Sent: Thursday, June 20, 2013 4:36 AM
                                      Subject: Re: [softrock40] Re: RX II with WebSDR help
                                       
                                      Bourn P/N: EM14COD-E24-L064S w/PB optical encoder from Mouser. I have also used The Oak Grigsby optical encoders without pushbutton and separate miniature momentary contact switches. I think Oak Grigsby was taken over by Bourn and their encoders now have Bourn partnumbers. 73 ... Sid.  
                                      On 20/06/13 04:29, Ron Hayes wrote:
                                       
                                      What rotary optical encoder is used for the Si570? Any info on this would be helpful.

                                      From: JOSEPH BASQUE mailto:jbasque@...
                                      To: mailto:softrock40@yahoogroups.com mailto:softrock40@yahoogroups.com
                                      Sent: Wednesday, June 19, 2013 8:01 PM
                                      Subject: Re: [softrock40] Re: RX II with WebSDR help [1 Attachment]
                                       
                                      The Si570 Controller and Frequency Generator Kit #2

                                      Attached is one of the kits I built

                                      http://www.qsl.net/k5bcq/Kits/Kits.html

                                      Great kits - i have built 3 of them - very easy to put together.

                                      If you use a dpdt switch - you can switch from usb mode to standalone control.
                                      I just remove the usb chip and tap on to the pins i need.

                                      Only 1 Si570 chip is needed. If you already have it on the softrock you can just run 4 wires - if i remember right.
                                      and 2 wires for the band select control

                                      The control kit has a push button control so you can program hundreds of center frequency and just rotate thru them as desired.
                                      Band select is automatically done if as you select the band.


                                      Sid Boyce has some great info :
                                      http://www.qsl.net/k5bcq/Kits/G3VBV.html





                                      Websdr:

                                      Once you have decided on the center freq you wish to rx, you must modify the config file in websdr to reflect the band, and center frquency and bandwidth.

                                      The bandwidth selected is dependent on the ability of your sound card..
                                      cheap audio cards - provide about 48k bw
                                      good audios cards - 9600 to 128k.

                                      Joe
                                      Ve1bwv
                                      From: Dave mailto:n1ohn@...
                                      To: mailto:softrock40@yahoogroups.com mailto:softrock40@yahoogroups.com
                                      Cc: mailto:softrock40@yahoogroups.com mailto:softrock40@yahoogroups.com
                                      Sent: Wednesday, June 19, 2013 9:30:10 PM
                                      Subject: Re: [softrock40] Re: RX II with WebSDR help
                                       
                                      Yes that what I thought. So how do we control the unit when it's in server mode with WebSDR? 

                                      :)  Dave

                                      On Jun 19, 2013, at 8:15 PM, Sid Boyce <sboyce@...> wrote:
                                       
                                      CFGSR is a .exe utility for Windows only. usbsoftrock which you have installed provides the functionality that allows you to calibrate the si570, set startup frequency if needed, set RX frequency, etc. 73 ... Sid. On 20/06/13 00:54, Dave wrote:
                                       
                                      Hi Joe 

                                      Is cfsgr a version for Ubuntu? 

                                      And we're do I get the LCD kit? 

                                      Thanks Joe!  Dave

                                      On Jun 19, 2013, at 4:06 PM, Joe Basque <jbasque@...>wrote:
                                       
                                      Dave,
                                      I run several softrocks using websdr
                                      I use a pc 3 bands and a raspberry pi for 17 Mtrs

                                      1. You can not control the frequency of the sdr with websdr.  USB connectivity to the computer is not recognized

                                      2. You can select the center freq on the sdr via one of the free softwares -cfsgr I think is what I used. You basically need to change the boot freq of the i570 chip and save.

                                      3. What I have done with 3 of my ensemble softrocks is add a LCD panel micro controller kit.  This allows me to see the on the LCD and change it to any freq.   The USB is not used 

                                      4. Of course with the crystal versions of softrocks  you would order the band and CRT freq.

                                      Hope this helps
                                      Joe
                                      Ve1bwv
                                      Sent from my iPhone
                                      On 2013-06-19, at 2:13 PM, Dave <n1ohn@...>wrote:
                                       
                                      Thanks I did that many times. not the sound that's the big problem it will not control the unit. 

                                      Is anyone actually running the WebSDR server end software in group that can help? 

                                      Thanks again all :)  Dave

                                      On Jun 19, 2013, at 7:39 AM, "Hide" <qrper72@...> wrote:
                                       
                                      OK, sorry... You should read the help about the websdr.cfg file and configure as your Ubuntu sound configuration at first. Sound system is a little bit confusing but you can do it. ja9mat Hidehiko. --- In mailto:softrock40%40yahoogroups.com, Dave mailto:n1ohn@... wrote: > > Hi > > Thanks I have the software > > Dave > > > On Jun 19, 2013, at 5:55 AM, "Hide" mailto:qrper72@... wrote: > > > Hi Dave, > > > > You should contact to the author of the Websdr by following site; > > > > http://www.websdr.org/ > > > > The websdr software is special function program and you can get > > software from him directly usong the e-mail. > > > > ja9mat hidehiko. > > > > --- In mailto:softrock40%40yahoogroups.com, "David" <n1ohn@> wrote: > > > > > > Hello all > > > > > > I'm wondering if any one is using the WebSDR server software for Lunux. > > > > > > I'm new to Ubuntu and have installed the WebSDR server software and the usbSoftrock software and can't figure out what I need to do next to get the server to talk to my Softrock RX II. > > > > > > Thanks all > > > Dave > > > > > > > >
                                      -- 
                                      Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                      Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                      Senior Staff Specialist, Cricket Coach
                                      Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                      
                                      -- 
                                      Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                                      Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                      Senior Staff Specialist, Cricket Coach
                                      Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                      
                                    • Alan
                                      ... Subject: Re: [softrock40] Re: RX II with WebSDR help Here is one of my Kees/John generators with a home-brew encoder and LF output.
                                      Message 20 of 20 , Jun 20, 2013
                                      • 0 Attachment
                                        ----- Original Message -----
                                        Subject: Re: [softrock40] Re: RX II with WebSDR help



                                        Here is one of my Kees/John generators with a home-brew encoder and LF output.
                                        <http://homepages.wightcable.net/~g4zfq/K-J-Controller.htm>


                                        73 Alan G4ZFQ
                                      • Your message has been successfully submitted and would be delivered to recipients shortly.