Re: [softrock40] Delta M-44
----- Original Message -----
Subject: Re: [softrock40] Delta M-44
> I was investigating the problem. I'm sure for 100% that it is a software
> problem with the WSPR 2.21. The I/Q Rx from the software is not really
> sensitive. He is ok when direct connected to the Audio.
> So what I did is as follow. I interchanged the Rx Audio from the RX-II and
> the FT-450. The 450 has much more audio available as the RX-II. So I was
> able to bring both RX to the right levels.
> Both (the FT-450 RX & the RX-II) are working fine now.
I see what you mean. Some versions of WSPR did not report the audio level correctly.
In all cases I have used WSPR successfully with a D44.
In any case WSPR is not really critical about audio levels.
73 Alan G4ZFQ