Re: Proper spectrum display with I/Q plugged in on Ensemble RX II
- Thanks Alan for the info on the display of the spectrum without the I/Q line plugged into the soundcard.
I did find another or maybe a related error of my ways though and had clipped a lead on U9 or one of the FST3253 switches when I was cleaning up soldering. Ordered another from K5NWA website.
You pretty much solder these little boogers right the first time or just start all over with a new chip! ;o)
--- In firstname.lastname@example.org, "Alan" <alan4alan@...> wrote:
> ----- Original Message -----
> Subject: [softrock40] Proper spectrum display with I/Q plugged in on Ensemble RX II
> > Does anybody know what the spectrum display is supposed to look like in Rocky without the I/Q plugged into the sound card? I
> > assume it supposed to be a cascading display of multiple images, right? Want to eliminate any issues an incompatible sound card
> > might be introducing. Plus either with or without the sound card plugged in, I get a real strong image, signal or spur at 7100,
> > 14100, etc. did something go wrong in my soldering?
> Just a flat line with possibly a large spike in the middle.
> Check you your mixer settings, no "Stereo Mix" or "What You Hear" enabled.
> 73 Alan G4ZFQ