Loading ...
Sorry, an error occurred while loading the content.
 

Re: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

Expand Messages
  • Gerry Huss
    I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max. I can mail you EAGLE files, if interested. PCB is
    Message 1 of 13 , Mar 27 2:02 PM
      I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max.
      I can mail you EAGLE files, if interested. PCB is mounted on a heatsink used to cool Intel processor and with fan.
      73, Gerry, OE6HGG


      Von: Michael <Patriot121@...>
      An: softrock40@yahoogroups.com
      Gesendet: 16:26 Mittwoch, 27.März 2013
      Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

       
      Did this work out Joe ?

      Mike KC7NOA

      --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@...> wrote:
      >
      > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
      > I have been using a on line translator but I can't get a account set
      > up the Funk site has no English version
      > I have PayPal if that would help.
      >
      > Thanks Joe wa9cgz
      >



    • Sid Boyce
      I d be very interested in the files, including a circuit diagram or pointer to where I can get one. I have the 1W FA-SDR driver which I have to test with the
      Message 2 of 13 , Mar 27 3:08 PM
        I'd be very interested in the files, including a circuit diagram or pointer to where I can get one.

        I have the 1W FA-SDR driver which I have to test with the UHFSDR then use it to drive the K5BCQ 20W PA - that is another nice kit for 160m - 6m.
        73 ... Sid.
         
        On 27/03/13 21:02, Gerry Huss wrote:
         
        I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max.
        I can mail you EAGLE files, if interested. PCB is mounted on a heatsink used to cool Intel processor and with fan.
        73, Gerry, OE6HGG


        Von: Michael <Patriot121@...>
        An: softrock40@yahoogroups.com
        Gesendet: 16:26 Mittwoch, 27.März 2013
        Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

         
        Did this work out Joe ?

        Mike KC7NOA

        --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@...> wrote:
        >
        > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
        > I have been using a on line translator but I can't get a account set
        > up the Funk site has no English version
        > I have PayPal if that would help.
        >
        > Thanks Joe wa9cgz
        >





        -- 
        Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
        Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
        Senior Staff Specialist, Cricket Coach
        Microsoft Windows Free Zone - Linux used for all Computing Tasks
        
      • Gerry Huss
        Sid, can I mail it to your individual adress ? I do not want to answer numerous requests here on yahoogroups 73, Gerry ________________________________ Von:
        Message 3 of 13 , Mar 27 3:21 PM
          Sid, can I mail it to your individual adress ?
          I do not want to answer numerous requests here on yahoogroups
          73,
          Gerry


          Von: Sid Boyce <sboyce@...>
          An: softrock40@yahoogroups.com
          Gesendet: 23:08 Mittwoch, 27.März 2013
          Betreff: Re: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

           
          I'd be very interested in the files, including a circuit diagram or pointer to where I can get one.

          I have the 1W FA-SDR driver which I have to test with the UHFSDR then use it to drive the K5BCQ 20W PA - that is another nice kit for 160m - 6m.
          73 ... Sid.
           
          On 27/03/13 21:02, Gerry Huss wrote:
           
          I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max.
          I can mail you EAGLE files, if interested. PCB is mounted on a heatsink used to cool Intel processor and with fan.
          73, Gerry, OE6HGG


          Von: Michael <Patriot121@...>
          An: softrock40@yahoogroups.com
          Gesendet: 16:26 Mittwoch, 27.März 2013
          Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

           
          Did this work out Joe ?

          Mike KC7NOA

          --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@...> wrote:
          >
          > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
          > I have been using a on line translator but I can't get a account set
          > up the Funk site has no English version
          > I have PayPal if that would help.
          >
          > Thanks Joe wa9cgz
          >





          -- 
          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
          Senior Staff Specialist, Cricket Coach
          Microsoft Windows Free Zone - Linux used for all Computing Tasks
          


        • Sid Boyce
          Sure you can Gerry. 73 ... Sid. ... -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech
          Message 4 of 13 , Mar 27 4:06 PM
            Sure you can Gerry.
            73 ... Sid.

            On 27/03/13 22:21, Gerry Huss wrote:
             
            Sid, can I mail it to your individual adress ?
            I do not want to answer numerous requests here on yahoogroups
            73,
            Gerry


            Von: Sid Boyce <sboyce@...>
            An: softrock40@yahoogroups.com
            Gesendet: 23:08 Mittwoch, 27.März 2013
            Betreff: Re: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

             
            I'd be very interested in the files, including a circuit diagram or pointer to where I can get one.

            I have the 1W FA-SDR driver which I have to test with the UHFSDR then use it to drive the K5BCQ 20W PA - that is another nice kit for 160m - 6m.
            73 ... Sid.
             
            On 27/03/13 21:02, Gerry Huss wrote:
             
            I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max.
            I can mail you EAGLE files, if interested. PCB is mounted on a heatsink used to cool Intel processor and with fan.
            73, Gerry, OE6HGG


            Von: Michael <Patriot121@...>
            An: softrock40@yahoogroups.com
            Gesendet: 16:26 Mittwoch, 27.März 2013
            Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

             
            Did this work out Joe ?

            Mike KC7NOA

            --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@...> wrote:
            >
            > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
            > I have been using a on line translator but I can't get a account set
            > up the Funk site has no English version
            > I have PayPal if that would help.
            >
            > Thanks Joe wa9cgz
            >








            -- 
            Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
            Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
            Senior Staff Specialist, Cricket Coach
            Microsoft Windows Free Zone - Linux used for all Computing Tasks
            
          • irbsurfing
            Hi Gerry, I would also be very interested in your PA design, could I request a schematic and layout file to my email address please? Thanks, Andrew G4XZL
            Message 5 of 13 , Apr 4, 2013
              Hi Gerry,
              I would also be very interested in your PA design, could I request a schematic and layout file to my email address please?
              Thanks,
              Andrew
              G4XZL

              --- In softrock40@yahoogroups.com, Gerry Huss <gerryhombre007@...> wrote:
              >
              > I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max.
              >
              > I can mail you EAGLE files, if interested. PCB is mounted on a heatsink used to cool Intel processor and with fan.
              >
              > 73, Gerry, OE6HGG
              >
              >
              >
              > ________________________________
              > Von: Michael <Patriot121@...>
              > An: softrock40@yahoogroups.com
              > Gesendet: 16:26 Mittwoch, 27.März 2013
              > Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz
              >
              >
              >  
              > Did this work out Joe ?
              >
              > Mike KC7NOA
              >
              > --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@> wrote:
              > >
              > > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
              > > I have been using a on line translator but I can't get a account set
              > > up the Funk site has no English version
              > > I have PayPal if that would help.
              > >
              > > Thanks Joe wa9cgz
              > >
              >
            • Gerry Huss
              give me your private email ________________________________ Von: irbsurfing An: softrock40@yahoogroups.com Gesendet: 14:22 Donnerstag,
              Message 6 of 13 , Apr 4, 2013
                give me your private email


                Von: irbsurfing <irbsurfing@...>
                An: softrock40@yahoogroups.com
                Gesendet: 14:22 Donnerstag, 4.April 2013
                Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz

                 
                Hi Gerry,
                I would also be very interested in your PA design, could I request a schematic and layout file to my email address please?
                Thanks,
                Andrew
                G4XZL

                --- In softrock40@yahoogroups.com, Gerry Huss <gerryhombre007@...> wrote:
                >
                > I made a version 1,8 - 54 MHz with BFG591 and 1 RDF16 , 0dBm in and 10W out. 12 Volt PS, ca 1,6 A max.
                >
                > I can mail you EAGLE files, if interested. PCB is mounted on a heatsink used to cool Intel processor and with fan.
                >
                > 73, Gerry, OE6HGG
                >
                >
                >
                > ________________________________
                > Von: Michael <Patriot121@...>
                > An: softrock40@yahoogroups.com
                > Gesendet: 16:26 Mittwoch, 27.März 2013
                > Betreff: [softrock40] Re: Funk amature magazine project qrp amplifier 1.8 - 144mhz
                >
                >
                >  
                > Did this work out Joe ?
                >
                > Mike KC7NOA
                >
                > --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@> wrote:
                > >
                > > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
                > > I have been using a on line translator but I can't get a account set
                > > up the Funk site has no English version
                > > I have PayPal if that would help.
                > >
                > > Thanks Joe wa9cgz
                > >
                >



              • jor
                Hi Joe, The artikel of the Pa amplifier is on this adres, http://www.box73.de/download/bausaetze/PLB-15.pdf And can be ordert on the kits page below,
                Message 7 of 13 , Apr 5, 2013
                  Hi Joe,

                  The artikel of the Pa amplifier is on this adres,
                  http://www.box73.de/download/bausaetze/PLB-15.pdf
                  And can be ordert on the kits page below,
                  http://www.box73.de/index.php?cPath=112_113

                  73'Joris PE1KTH

                  --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@...> wrote:
                  >
                  > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
                  > I have been using a on line translator but I can't get a account set
                  > up the Funk site has no English version
                  > I have PayPal if that would help.
                  >
                  > Thanks Joe wa9cgz
                  >
                • Sid Boyce
                  I have their 1W driver all wired up to a RX/TX switch ready to test with the UHFSDR with a 18dB attenuator on the input. If OK I ll use it to drive the K5BCQ
                  Message 8 of 13 , Apr 5, 2013
                    I have their 1W driver all wired up to a RX/TX switch ready to test with the UHFSDR with a 18dB attenuator on the input.
                    If OK I'll use it to drive the K5BCQ 20W PA.
                    73 ... Sid.

                    On 05/04/13 15:46, jor wrote:
                     


                    Hi Joe,

                    The artikel of the Pa amplifier is on this adres,
                    http://www.box73.de/download/bausaetze/PLB-15.pdf
                    And can be ordert on the kits page below,
                    http://www.box73.de/index.php?cPath=112_113

                    73'Joris PE1KTH

                    --- In softrock40@yahoogroups.com, "wa9cgz" <joeprice@...> wrote:
                    >
                    > I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted.
                    > I have been using a on line translator but I can't get a account set
                    > up the Funk site has no English version
                    > I have PayPal if that would help.
                    >
                    > Thanks Joe wa9cgz
                    >



                    -- 
                    Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
                    Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                    Senior Staff Specialist, Cricket Coach
                    Microsoft Windows Free Zone - Linux used for all Computing Tasks
                    
                  Your message has been successfully submitted and would be delivered to recipients shortly.