Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] Re: HDSDR 2.60 released

Expand Messages
  • EB4APL
    Hi, Since English is not my prime language I ll try to explain it with an example: - I tune to 118.075, a local airport tower with the center frequency set to
    Message 1 of 8 , Mar 26, 2013
    • 0 Attachment

      Since English is not my prime language I'll try to explain it with an
      - I tune to 118.075, a local airport tower with the center frequency set
      to 117.200.
      - After a while I want to remain listening on 118.075 but I want to have
      more spectrum margin to the right where other frequencies like Approach
      at 118.525 and others are located.
      - Just with a right click pointing a convenient place in the spectrum I
      move the spectrum coverage without losing my tune in 118.075. I can do
      it in various steps if I want, of course the limit is the bandwidth
      imposed by the sampling rate.
      The important thing here is that you don't lose the channel that you are
      listening to. Of course you can move the LO using a number of options
      but you need to remember where you were and enter it again. You can move
      the place where your tunning is located in the spectrum span and see
      what happens above or below it, all in one operation that becomes automatic.
      It is also useful when recovering a frequency from the Frequency
      Manager and you want to relocate your spectrum.
      I don't know if this example is illustrative enough, but the same is
      applicable to exploring an HF ham band while listening on a spot and a
      number of situations.

      And just a remainder, could you make customizable the database location,
      including the pathname in the profile? Using different H/W for HF and
      V-UHF to have separate databases is very convenient (I already do it
      renaming it but it is cumbersome and prone to fatal errors.

      Best regards,
      Ignacio EB4APL

      On 26/03/2013 7:26, lc_hdsdr wrote:
      > Hi Ignacio,
      > i'm surprised that the old function was used. It was very difficult to
      > understand what is happening ..
      > The old function got removed completely. Can you explain (maybe directly
      > via email) for what purpose you were using it?
      > kind regards,
      > LC
      > --- In softrock40@yahoogroups.com <mailto:softrock40%40yahoogroups.com>,
      > EB4APL <eb4apl@...> wrote:
      > >
      > > Hi,
      > >
      > > The new feature:
      > > " - Right click on RF display sets Tune frequency - by changing LO
      > > frequency - keeping LO <-> Tune offset"
      > > has removed the current use of the Right click on the RF display, namely
      > > "Set the LO to the pointed frequency without losing the station you are
      > > tuned to", (if possible, of course).
      > > Is this capability still available, maybe using a combination of keys or
      > > configuring an option? I'm used to it and found it very convenient.
      > >
      > > And the usual thanks to the project team, not for repeated many times
      > > are less deserved.
      > > 73 de Ignacio EB4APL
    Your message has been successfully submitted and would be delivered to recipients shortly.