RES: [softrock40] Re: USB to Parallel adapter
- View Source
What about install some pull-up resistors to +5 Volts line?
Had a spare PCI express slot so I bought a parallel card.
It won't work with the 1000 because the logic high levels are only 3.8 volts.
--- In email@example.com, "Alan" <alan4alan@...> wrote:
> ----- Original Message -----
> From: "Charles" <c.oawright@...>
> To: <firstname.lastname@example.org>
> Sent: Monday, July 30, 2012 11:46 PM
> Subject: [softrock40] Re: USB to Parallel adapter
> > Need a USB to Parallel adapther to run a flex 1000.
> > A friend loaned me one he had to try out.
> > I am using Vista OS and have several softrocks and a Delta 44 sound
> > My computer does not have the required parrallel port.href="http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/index.html.en">http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/index.html.en> not
> > Is an adapter available?
> Most of these are just printer adaptors.
> There are kits, I use the low speed <
> for Flex, but with PSDR, andfor later Windows.
> just on XP. But it is a full parallel adapter.
> The high speed recommends reflow soldering but is probably the best bet
> When I did this I only found one commercial full parallel model and that
> 73 Alan G4ZFQ