- Hmmm... I made it work with via the Softrock,Si-570 setting but I did quite a bit of fiddling to get the frequency settings correct. I will have to give aMessage 1 of 10 , Jan 30, 2012View SourceHmmm... I made it work with via the 'Softrock,Si-570' setting but I did quite a bit of fiddling to get the frequency settings correct. I will have to give a try with 'Other'. Thanks.
On 1/30/2012 12:50 PM, Tom wrote:
Alan, You are right - I did not play enough :-) but the problem was not the lack of center freq which I was entering. The key is to select "Other" for the Front End device, not SoftRock / Si570. apparently that is for Si570 equipped SoftRocks only (makes sense now in retrospect).
Using Other from the front end drop down does indeed work quite well!!
I am testing with an old P4 that is full of bloatware, and I get some popping and crackling with Rocky, but the SDR sharp audio is clean as can be. Very nice.
Tnx for encouraging me to play some more,
--- In firstname.lastname@example.org, "alanzfq" <alan4alan@...> wrote:
> --- In email@example.com, "Tom" <tmoll150@> wrote:
> > I was just playing around and wanted to see if it would work.
> > thanks,
> You did not play enough.
> It will work. You can set the centre frequency by maually typing in the centre frequency.
> 73 Alan G4ZFQ
__________ Information from ESET Smart Security, version of virus signature database 6839 (20120130) __________
The message was checked by ESET Smart Security.