Loading ...
Sorry, an error occurred while loading the content.

Re: [softrock40] Re: Original SoftRock-40

Expand Messages
  • Ross Stenberg
    We could call it Tony s Dongle or a Soft Dongle if you prefer.
    Message 1 of 22 , Dec 2, 2011
    • 0 Attachment
      We could call it Tony's Dongle or a Soft Dongle if you prefer.

      --- In softrock40@yahoogroups.com, "Tony Parks" <kb9yig@...> wrote:
      >> Good Morning All,
      >>
      >> Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.
      >>
      >> Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.
      >>
      >> Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.
      >>
      >> Thanks and 73,
      >> Tony KB9YIG
      >>
    • Gary Marklund
      I would be interested. 73, Gary KJ7RT Sun City, AZ
      Message 2 of 22 , Dec 2, 2011
      • 0 Attachment
        I would be interested.

        73,

        Gary KJ7RT
        Sun City, AZ




        On Fri, Dec 2, 2011 at 6:06 AM, Tony Parks <kb9yig@...> wrote:
         

        Good Morning All,

        Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.

        Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.

        Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.

        Thanks and 73,
        Tony KB9YIG


      • Jeff Kelly
        I would be interested. Jeff K2SDR From: Gary Marklund Sent: Friday, December 02, 2011 10:44 AM To: softrock40@yahoogroups.com Subject: Re: [softrock40]
        Message 3 of 22 , Dec 2, 2011
        • 0 Attachment
          I would be interested.
           
          Jeff
          K2SDR
           
           
          Sent: Friday, December 02, 2011 10:44 AM
          Subject: Re: [softrock40] Original SoftRock-40
           


          I would be interested.

          73,

          Gary KJ7RT
          Sun City, AZ




          On Fri, Dec 2, 2011 at 6:06 AM, Tony Parks <kb9yig@...> wrote:
           

          Good Morning All,

          Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.

          Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.

          Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.

          Thanks and 73,
          Tony KB9YIG


        • Tony Parks
          A couple additional thoughts... If a new SoftRock-40 kit is done, the design would mostly be SMT for resistors, capacitors, transistors, etc. Probably the
          Message 4 of 22 , Dec 2, 2011
          • 0 Attachment
            A couple additional thoughts...

            If a new SoftRock-40 kit is done, the design would mostly be SMT for resistors, capacitors, transistors, etc.  Probably the only non-SMT components would be the crystal, inductor and transformer.   (Inductor and transformer would continue to be user wound on toroid cores.)

            A two foot long stereo audio cable would be included in the kit where the cable would have a 3.5mm plug on one end.  A two foot long length of coax cable would also be included in the kit.

            Kit price would depend  on the number of crystals to be included but probably would be around $23 with crystals for 160m through 20m.

            73,
            --
            Tony Parks
            kb9yig@...
            http://www.kb9yig.com
            
            


            On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
             
            Good Morning All,

            Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.

            Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.

            Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.

            Thanks and 73,
            Tony KB9YIG




          • K. D. Sarchet
            I am definitely interested 73 de WY5R - KD JT65A Power Calculator From: softrock40@yahoogroups.com
            Message 5 of 22 , Dec 2, 2011
            • 0 Attachment

              I am definitely interested

               

              73 de WY5R - KD

               

              JT65A Power Calculator

               

              From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of Tony Parks
              Sent: Friday, December 02, 2011 7:07 AM
              To: softrock40@yahoogroups.com
              Subject: [softrock40] Original SoftRock-40

               

               

              Good Morning All,

              Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.

              Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.

              Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.

              Thanks and 73,
              Tony KB9YIG

            • lmarion@mt.net
              I m sure I would want a few at least......... Leroy ... This message was sent using IMP, the Internet Messaging Program.
              Message 6 of 22 , Dec 2, 2011
              • 0 Attachment
                I'm sure I would want a few at least.........
                Leroy

                Quoting Tony Parks <kb9yig@...>:

                > Good Morning All,
                >
                > Several have recently expressed an interest in the original
                > SoftRock-40 design that plugged into a PC USB socket to take DC
                > power form the USB port.
                >
                > Basically it would be the Lite II circuit, less the 5 volt regulator
                > circuit. A USB-A plug would be on one end of the narrow board and
                > the antenna and stereo audio connections would be on the other end
                > of the board.
                >
                > Would there be an interest in an updated version of that kit? If
                > there is enough interest, I will give it a try.
                >
                > Thanks and 73,
                > Tony KB9YIG
                >
                >
                >
                >



                ----------------------------------------------------------------
                This message was sent using IMP, the Internet Messaging Program.
              • David Meye
                i am interested kl7qw ________________________________ From: Tony Parks To: softrock40@yahoogroups.com Sent: Friday, December 2, 2011 7:06
                Message 7 of 22 , Dec 2, 2011
                • 0 Attachment
                  i am interested kl7qw


                  From: Tony Parks <kb9yig@...>
                  To: softrock40@yahoogroups.com
                  Sent: Friday, December 2, 2011 7:06 AM
                  Subject: [softrock40] Original SoftRock-40

                   
                  Good Morning All,

                  Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.

                  Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.

                  Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.

                  Thanks and 73,
                  Tony KB9YIG



                • Joel Black
                  I would rather have SMT. Joel - W4JBB
                  Message 8 of 22 , Dec 2, 2011
                  • 0 Attachment
                    I would rather have SMT.

                    Joel - W4JBB

                    On 12/2/2011 9:48 AM, Tony Parks wrote:
                    A couple additional thoughts...

                    If a new SoftRock-40 kit is done, the design would mostly be SMT for resistors, capacitors, transistors, etc.  Probably the only non-SMT components would be the crystal, inductor and transformer.   (Inductor and transformer would continue to be user wound on toroid cores.)

                    A two foot long stereo audio cable would be included in the kit where the cable would have a 3.5mm plug on one end.  A two foot long length of coax cable would also be included in the kit.

                    Kit price would depend  on the number of crystals to be included but probably would be around $23 with crystals for 160m through 20m.

                    73,
                    --
                    Tony Parks
                    kb9yig@...
                    http://www.kb9yig.com
                    
                    


                    On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                     
                    Good Morning All,

                    Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.

                    Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.

                    Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.

                    Thanks and 73,
                    Tony KB9YIG




                  • Gordon JC Pearce
                    On Fri, 02 Dec 2011 17:35:33 -0600 ... Seconded! I don t have the patience or enthusiasm to work on complicated, fiddly through-hole parts, and I no longer
                    Message 9 of 22 , Dec 2, 2011
                    • 0 Attachment
                      On Fri, 02 Dec 2011 17:35:33 -0600
                      Joel Black <joel.b.black@...> wrote:

                      > I would rather have SMT.
                      >
                      > Joel - W4JBB

                      Seconded! I don't have the patience or enthusiasm to work on complicated, fiddly through-hole parts, and I no longer have a big enough welding torch to deal with the massive leads.

                      --
                      Gordon JC Pearce MM0YEQ <gordonjcp@...>
                    • Leroy Marion
                      Thirded, I have gotten pretty good at SM, and prefer it, especially when its finished! Leroy AB7CE On Fri, 02 Dec 2011 17:35:33 -0600 ... Seconded! I don t
                      Message 10 of 22 , Dec 2, 2011
                      • 0 Attachment
                         
                        Thirded,  I have gotten pretty good at SM, and prefer it,
                        especially when its finished!
                                                                             Leroy AB7CE
                         
                         
                         

                        On Fri, 02 Dec 2011 17:35:33 -0600
                        Joel Black <mailto:joel.b.black%40gmail.com> wrote:

                        > I would rather have SMT.
                        >
                        > Joel -
                        W4JBB

                        Seconded! I don't have the patience or enthusiasm to work on complicated, fiddly through-hole parts, and I no longer have a big enough welding torch to deal with the massive leads.

                        --
                        Gordon JC Pearce MM0YEQ <mailto:gordonjcp%40gjcp.net>

                      • Marcel
                        I am interested with SMT version Marcel W5BJV From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of Gordon JC Pearce Sent: samedi
                        Message 11 of 22 , Dec 3, 2011
                        • 0 Attachment

                          I am interested with SMT version

                           

                          Marcel  W5BJV

                           

                          From: softrock40@yahoogroups.com [mailto:softrock40@yahoogroups.com] On Behalf Of Gordon JC Pearce
                          Sent: samedi 3 décembre 2011 01:04
                          To: softrock40@yahoogroups.com
                          Subject: Re: [softrock40] Original SoftRock-40

                           

                           

                          On Fri, 02 Dec 2011 17:35:33 -0600
                          Joel Black <joel.b.black@...> wrote:

                          > I would rather have SMT.
                          >
                          > Joel - W4JBB

                          Seconded! I don't have the patience or enthusiasm to work on complicated, fiddly through-hole parts, and I no longer have a big enough welding torch to deal with the massive leads.

                          --
                          Gordon JC Pearce MM0YEQ <gordonjcp@...>

                        • bill_noyce
                          I would certainly be interested in a mostly-SMD Softrock in this form factor. I d most likely want to build it as a K2 panadaptor (4.9xx center frequency). --
                          Message 12 of 22 , Dec 4, 2011
                          • 0 Attachment
                            I would certainly be interested in a mostly-SMD Softrock in this form factor. I'd most likely want to build it as a K2 panadaptor (4.9xx center frequency).
                            -- Bill, AB1AV

                            --- In softrock40@yahoogroups.com, Tony Parks <kb9yig@...> wrote:
                            >
                            > A couple additional thoughts...
                            >
                            > If a new SoftRock-40 kit is done, the design would mostly be SMT for
                            > resistors, capacitors, transistors, etc. Probably the only non-SMT
                            > components would be the crystal, inductor and transformer. (Inductor
                            > and transformer would continue to be user wound on toroid cores.)
                            >
                            > A two foot long stereo audio cable would be included in the kit where
                            > the cable would have a 3.5mm plug on one end. A two foot long length of
                            > coax cable would also be included in the kit.
                            >
                            > Kit price would depend on the number of crystals to be included but
                            > probably would be around $23 with crystals for 160m through 20m.
                            >
                            > 73,
                            > --
                            >
                            > Tony Parks
                            > kb9yig@...
                            > http://www.kb9yig.com
                            >
                            >
                            >
                            >
                            > On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                            >
                            > >
                            > >
                            > > Good Morning All,
                            > >
                            > > Several have recently expressed an interest in the original
                            > > SoftRock-40 design that plugged into a PC USB socket to take DC power
                            > > form the USB port.
                            > >
                            > > Basically it would be the Lite II circuit, less the 5 volt regulator
                            > > circuit. A USB-A plug would be on one end of the narrow board and the
                            > > antenna and stereo audio connections would be on the other end of the
                            > > board.
                            > >
                            > > Would there be an interest in an updated version of that kit? If there
                            > > is enough interest, I will give it a try.
                            > >
                            > > Thanks and 73,
                            > > Tony KB9YIG
                            > >
                            > >
                            > >
                            > >
                            > >
                            >
                          • Dale
                            Tony, this would be a great group project for my club. Dale
                            Message 13 of 22 , Dec 4, 2011
                            • 0 Attachment
                              Tony, this would be a great group project for my club. Dale

                              --- In softrock40@yahoogroups.com, Tony Parks <kb9yig@...> wrote:
                              >
                              > A couple additional thoughts...
                              >
                              > If a new SoftRock-40 kit is done, the design would mostly be SMT for
                              > resistors, capacitors, transistors, etc. Probably the only non-SMT
                              > components would be the crystal, inductor and transformer. (Inductor
                              > and transformer would continue to be user wound on toroid cores.)
                              >
                              > A two foot long stereo audio cable would be included in the kit where
                              > the cable would have a 3.5mm plug on one end. A two foot long length of
                              > coax cable would also be included in the kit.
                              >
                              > Kit price would depend on the number of crystals to be included but
                              > probably would be around $23 with crystals for 160m through 20m.
                              >
                              > 73
                              > --
                              >
                              > Tony Parks
                              > kb9yig@...
                              > http://www.kb9yig.com
                              >
                              >
                              >
                              >
                              > On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                              >
                              > >
                              > >
                              > > Good Morning All,
                              > >
                              > > Several have recently expressed an interest in the original
                              > > SoftRock-40 design that plugged into a PC USB socket to take DC power
                              > > form the USB port.
                              > >
                              > > Basically it would be the Lite II circuit, less the 5 volt regulator
                              > > circuit. A USB-A plug would be on one end of the narrow board and the
                              > > antenna and stereo audio connections would be on the other end of the
                              > > board.
                              > >
                              > > Would there be an interest in an updated version of that kit? If there
                              > > is enough interest, I will give it a try.
                              > >
                              > > Thanks and 73,
                              > > Tony KB9YIG
                              > >
                              > >
                              > >
                              > >
                              > >
                              >
                            • David Meye
                              Tony  I am really interested inone of these. ________________________________ From: Dale To: softrock40@yahoogroups.com Sent: Sunday,
                              Message 14 of 22 , Dec 4, 2011
                              • 0 Attachment
                                Tony

                                 I am really interested inone of these.


                                From: Dale <ks4ns@...>
                                To: softrock40@yahoogroups.com
                                Sent: Sunday, December 4, 2011 7:15 PM
                                Subject: [softrock40] Re: Original SoftRock-40

                                 
                                Tony, this would be a great group project for my club. Dale

                                --- In softrock40@yahoogroups.com, Tony Parks <kb9yig@...> wrote:
                                >
                                > A couple additional thoughts...
                                >
                                > If a new SoftRock-40 kit is done, the design would mostly be SMT for
                                > resistors, capacitors, transistors, etc. Probably the only non-SMT
                                > components would be the crystal, inductor and transformer. (Inductor
                                > and transformer would continue to be user wound on toroid cores.)
                                >
                                > A two foot long stereo audio cable would be included in the kit where
                                > the cable would have a 3.5mm plug on one end. A two foot long length of
                                > coax cable would also be included in the kit.
                                >
                                > Kit price would depend on the number of crystals to be included but
                                > probably would be around $23 with crystals for 160m through 20m.
                                >
                                > 73
                                > --
                                >
                                > Tony Parks
                                > kb9yig@...
                                > http://www.kb9yig.com
                                >
                                >
                                >
                                >
                                > On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                                >
                                > >
                                > >
                                > > Good Morning All,
                                > >
                                > > Several have recently expressed an interest in the original
                                > > SoftRock-40 design that plugged into a PC USB socket to take DC power
                                > > form the USB port.
                                > >
                                > > Basically it would be the Lite II circuit, less the 5 volt regulator
                                > > circuit. A USB-A plug would be on one end of the narrow board and the
                                > > antenna and stereo audio connections would be on the other end of the
                                > > board.
                                > >
                                > > Would there be an interest in an updated version of that kit? If there
                                > > is enough interest, I will give it a try.
                                > >
                                > > Thanks and 73,
                                > > Tony KB9YIG
                                > >
                                > >
                                > >
                                > >
                                > >
                                >



                              • poikaa
                                You can count me in also, I ve been wanting to build one since they came out but I lost when they were discontinued! 73 Rod KB8DNS
                                Message 15 of 22 , Dec 4, 2011
                                • 0 Attachment
                                  You can count me in also, I've been wanting to build one since they came out but I lost when they were discontinued!

                                  73 Rod KB8DNS

                                  --- In softrock40@yahoogroups.com, "Dale" <ks4ns@...> wrote:
                                  >
                                  > Tony, this would be a great group project for my club. Dale
                                  >
                                  > --- In softrock40@yahoogroups.com, Tony Parks <kb9yig@> wrote:
                                  > >
                                  > > A couple additional thoughts...
                                  > >
                                  > > If a new SoftRock-40 kit is done, the design would mostly be SMT for
                                  > > resistors, capacitors, transistors, etc. Probably the only non-SMT
                                  > > components would be the crystal, inductor and transformer. (Inductor
                                  > > and transformer would continue to be user wound on toroid cores.)
                                  > >
                                  > > A two foot long stereo audio cable would be included in the kit where
                                  > > the cable would have a 3.5mm plug on one end. A two foot long length of
                                  > > coax cable would also be included in the kit.
                                  > >
                                  > > Kit price would depend on the number of crystals to be included but
                                  > > probably would be around $23 with crystals for 160m through 20m.
                                  > >
                                  > > 73
                                  > > --
                                  > >
                                  > > Tony Parks
                                  > > kb9yig@
                                  > > http://www.kb9yig.com
                                  > >
                                  > >
                                  > >
                                  > >
                                  > > On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                                  > >
                                  > > >
                                  > > >
                                  > > > Good Morning All,
                                  > > >
                                  > > > Several have recently expressed an interest in the original
                                  > > > SoftRock-40 design that plugged into a PC USB socket to take DC power
                                  > > > form the USB port.
                                  > > >
                                  > > > Basically it would be the Lite II circuit, less the 5 volt regulator
                                  > > > circuit. A USB-A plug would be on one end of the narrow board and the
                                  > > > antenna and stereo audio connections would be on the other end of the
                                  > > > board.
                                  > > >
                                  > > > Would there be an interest in an updated version of that kit? If there
                                  > > > is enough interest, I will give it a try.
                                  > > >
                                  > > > Thanks and 73,
                                  > > > Tony KB9YIG
                                  > > >
                                  > > >
                                  > > >
                                  > > >
                                  > > >
                                  > >
                                  >
                                • Tilman D. T
                                  Tony I have built quite a number of SR:s now and think that I would be quite good of you would go down the SMT-route. The old trough hole components are just
                                  Message 16 of 22 , Dec 4, 2011
                                  • 0 Attachment
                                    Tony

                                    I have built quite a number of SR:s now and think that I would be quite good of you would go down the SMT-route. The old trough hole components are just wasting space (and money). Considering that you already use SMT-type IC:s I would belive that people do not mind
                                    using SMT type rasistors and caps all the way. GOOD MOVE !!
                                    I guess the best SMT size for "amateur use" are of type 1206. Even the capacitors are available with marking on them from some suppliers.

                                    To be perfectly honest I would not mind at all if you would consider
                                    using ready made inductors (SMT-type). It is a bit hard work to wind those very small inductors for the BPF:s.

                                    Having power drawn from the USB is a nice feature of course. Especially if the USB-interface is used to control a Si-570... :-)

                                    Best regards from Sweden / Tilman SM0JZT




                                    >
                                    > A couple additional thoughts...
                                    >
                                    > If a new SoftRock-40 kit is done, the design would mostly be SMT for
                                    > resistors, capacitors, transistors, etc. Probably the only non-SMT
                                    > components would be the crystal, inductor and transformer. (Inductor
                                    > and transformer would continue to be user wound on toroid cores.)
                                    >
                                    > A two foot long stereo audio cable would be included in the kit where
                                    > the cable would have a 3.5mm plug on one end. A two foot long length of
                                    > coax cable would also be included in the kit.
                                    >
                                    > Kit price would depend on the number of crystals to be included but
                                    > probably would be around $23 with crystals for 160m through 20m.
                                    >
                                    > 73,
                                    > --
                                    >
                                    > Tony Parks
                                    > kb9yig@...
                                    > http://www.kb9yig.com
                                    >
                                    >
                                    >
                                    >
                                    > On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                                    >
                                    > >
                                    > >
                                    > > Good Morning All,
                                    > >
                                    > > Several have recently expressed an interest in the original
                                    > > SoftRock-40 design that plugged into a PC USB socket to take DC power
                                    > > form the USB port.
                                    > >
                                    > > Basically it would be the Lite II circuit, less the 5 volt regulator
                                    > > circuit. A USB-A plug would be on one end of the narrow board and the
                                    > > antenna and stereo audio connections would be on the other end of the
                                    > > board.
                                    > >
                                    > > Would there be an interest in an updated version of that kit? If there
                                    > > is enough interest, I will give it a try.
                                    > >
                                    > > Thanks and 73,
                                    > > Tony KB9YIG
                                    > >
                                    > >
                                    > >
                                    > >
                                    > >
                                    >
                                  • Jasmine Strong
                                    You can even get ferrite toroid inductors with SMT tabs these days. I imagine their performance is quite good; after all they are used in many cellphones,
                                    Message 17 of 22 , Dec 4, 2011
                                    • 0 Attachment

                                      You can even get ferrite toroid inductors with SMT tabs these days.  I imagine their performance is quite good;  after all they are used in many cellphones, which are software defined radios with bandwidth and sensitivity far in excess of what's available on softrock.

                                      -J.

                                      On 4 Dec 2011, at 22:13, Tilman D. T wrote:

                                       

                                      Tony

                                      I have built quite a number of SR:s now and think that I would be quite good of you would go down the SMT-route. The old trough hole components are just wasting space (and money). Considering that you already use SMT-type IC:s I would belive that people do not mind
                                      using SMT type rasistors and caps all the way. GOOD MOVE !!
                                      I guess the best SMT size for "amateur use" are of type 1206. Even the capacitors are available with marking on them from some suppliers.

                                      To be perfectly honest I would not mind at all if you would consider
                                      using ready made inductors (SMT-type). It is a bit hard work to wind those very small inductors for the BPF:s.

                                      Having power drawn from the USB is a nice feature of course. Especially if the USB-interface is used to control a Si-570... :-)

                                      Best regards from Sweden / Tilman SM0JZT

                                      >
                                      > A couple additional thoughts...
                                      >
                                      > If a new SoftRock-40 kit is done, the design would mostly be SMT for
                                      > resistors, capacitors, transistors, etc. Probably the only non-SMT
                                      > components would be the crystal, inductor and transformer. (Inductor
                                      > and transformer would continue to be user wound on toroid cores.)
                                      >
                                      > A two foot long stereo audio cable would be included in the kit where
                                      > the cable would have a 3.5mm plug on one end. A two foot long length of
                                      > coax cable would also be included in the kit.
                                      >
                                      > Kit price would depend on the number of crystals to be included but
                                      > probably would be around $23 with crystals for 160m through 20m.
                                      >
                                      > 73,
                                      > --
                                      >
                                      > Tony Parks
                                      > kb9yig@...
                                      > http://www.kb9yig.com
                                      >
                                      >
                                      >
                                      >
                                      > On Fri, 2011-12-02 at 13:06 +0000, Tony Parks wrote:
                                      >
                                      > >
                                      > >
                                      > > Good Morning All,
                                      > >
                                      > > Several have recently expressed an interest in the original
                                      > > SoftRock-40 design that plugged into a PC USB socket to take DC power
                                      > > form the USB port.
                                      > >
                                      > > Basically it would be the Lite II circuit, less the 5 volt regulator
                                      > > circuit. A USB-A plug would be on one end of the narrow board and the
                                      > > antenna and stereo audio connections would be on the other end of the
                                      > > board.
                                      > >
                                      > > Would there be an interest in an updated version of that kit? If there
                                      > > is enough interest, I will give it a try.
                                      > >
                                      > > Thanks and 73,
                                      > > Tony KB9YIG
                                      > >
                                      > >
                                      > >
                                      > >
                                      > >
                                      >


                                    • Eric Söderman
                                      Hi, I agree what others have said that surface mount components would be nice to be used as much as possible. If SMD inductors could be used and not costing
                                      Message 18 of 22 , Dec 4, 2011
                                      • 0 Attachment
                                        Hi,

                                        I agree what others have said that surface mount components would be
                                        nice to be used as much as possible. If SMD inductors could be used
                                        and not costing too much and give ok performance that would be good
                                        also. But I see a problem that you want to supply kits where the
                                        builder can choose different bands to build for, than there would be a
                                        large waste (and cost) of components not used...

                                        Another idea that I had was if it would be possible to include sound
                                        card on board? I remember I read an article in Radcom a while ago
                                        about an IC that included more or less everything (just a crystal and
                                        a few capacitors needed if I remember correctly). Maybe this IC (that
                                        I don´t remember the name of) is not suitable for SDR (unknown if
                                        stereo or what sample rate). Anyway, maybe there are other options
                                        too?

                                        It would be really cool with only USB connection and antenna
                                        connection. But maybe it would even be possible to make this optional
                                        and route the audio connectors too for those that want to use other
                                        sound card.

                                        Just an idea from Eric SA5BKE


                                        On Fri, Dec 2, 2011 at 2:06 PM, Tony Parks <kb9yig@...> wrote:

                                        > Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.
                                        >
                                        > Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.
                                        >
                                        > Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.
                                      • Sid Boyce
                                        The Mobo is shipped with both SMT inductors and toroids. The SMT ones are said to be of a much lower Q factor but I hadn t noticed any big differences between
                                        Message 19 of 22 , Dec 5, 2011
                                        • 0 Attachment
                                          The Mobo is shipped with both SMT inductors and toroids. The SMT ones are said to be of a much lower Q factor but I hadn't noticed any big differences between the two, so the differences may be more measured than perceived in most cases.

                                          There are SMT XTALS, some have to be oriented correctly, which is easily pointed out to the builder.

                                          SMT looks daunting before you've done one. It is no big deal and a big saver of time. The only added investment is a good fine tipped soldering iron, an eye loop or magnifying lamp and a decent pair of tweezers to securely grip parts as if they ping out of a cheap pair, they'll never again be seen unless it's your lucky day.
                                          73 ... Sid.

                                          On 05/12/11 07:15, Eric Söderman wrote:  

                                          Hi,

                                          I agree what others have said that surface mount components would be
                                          nice to be used as much as possible. If SMD inductors could be used
                                          and not costing too much and give ok performance that would be good
                                          also. But I see a problem that you want to supply kits where the
                                          builder can choose different bands to build for, than there would be a
                                          large waste (and cost) of components not used...

                                          Another idea that I had was if it would be possible to include sound
                                          card on board? I remember I read an article in Radcom a while ago
                                          about an IC that included more or less everything (just a crystal and
                                          a few capacitors needed if I remember correctly). Maybe this IC (that
                                          I don´t remember the name of) is not suitable for SDR (unknown if
                                          stereo or what sample rate). Anyway, maybe there are other options
                                          too?

                                          It would be really cool with only USB connection and antenna
                                          connection. But maybe it would even be possible to make this optional
                                          and route the audio connectors too for those that want to use other
                                          sound card.

                                          Just an idea from Eric SA5BKE

                                          On Fri, Dec 2, 2011 at 2:06 PM, Tony Parks <kb9yig@...> wrote:

                                          > Several have recently expressed an interest in the original SoftRock-40 design that plugged into a PC USB socket to take DC power form the USB port.
                                          >
                                          > Basically it would be the Lite II circuit, less the 5 volt regulator circuit. A USB-A plug would be on one end of the narrow board and the antenna and stereo audio connections would be on the other end of the board.
                                          >
                                          > Would there be an interest in an updated version of that kit? If there is enough interest, I will give it a try.



                                          -- 
                                          Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
                                          Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
                                          Senior Staff Specialist, Cricket Coach
                                          Microsoft Windows Free Zone - Linux used for all Computing Tasks
                                          
                                        Your message has been successfully submitted and would be delivered to recipients shortly.